Hi,
I am a Dba and very new to filesystems and stuff.
I think that we have Veritas filesystems on my Sun SOlaris 5.8 box, how do I confirm this: all my filesystems are mounted like this:
/dev/vx/dsk...
Now we are also using disk arrays (storedge a1000) how do I access them from the system.... (1 Reply)
Can someone please help.
I have been given the opportunity to set up a storedge multipack (6 x 36 gig drives).
Equipment will attach to sun 420r with 2 x 36 gig drives. Solaris 8/ 4gig memory.
Total disk space = (72gig + 216gig(storedge))
I plan to install a fresh copy of solaris on... (5 Replies)
I just installed sun storedge 3310 connected to a sunfire 280R with a total siz of 680GB and now am trying to create filesystems.
issue format command and created my partitions, the largest size of the partition is 170GB. but I try to create new filesystems by using newfs like
newfs... (3 Replies)
Sorry if this seems trivial. i have been given a task at work to configure a sun processing server "enterprise 4500" so it can work with the a storage server "storedge A5200" and "storedge D1000"
the truth is i have never worked on a sun server before. i need a guideline (step by step) as to... (5 Replies)
Hi Community,
I'm working on Solaris 10 installation with 1 Sun Server V490 and 1 StoredgeTek 3510 (Standalone configuration).
I connected the Server to the Storedge with 1 fiber cables and I created 3 LUNs with RAID1 Configuration.
Today I've a problem, infact I have to connect a second... (3 Replies)
We have a dual-controller StorEdge 3320 disk array with 5 disks (each 320 MB). Four disks have been set up in a RAID-5 configuration with the remaining disk acting as a hot spare. There is a single logical drive which has been partitioned into 3 slices.
The disk array is to be simultaneously... (14 Replies)
Hi,
may be this is an AIX noob question:
my current C++ application runs on Linux and is quite memory consuming. Therefore, the application writes a logfile after it has finished containing memory information, CPU information, information on the running other processes besides my application... (5 Replies)
Hi,
My question is What is StorEdge in Solairs?
What are A1000 AND D1000? (3 Replies)
Discussion started by: aparna66
3 Replies
LEARN ABOUT NETBSD
jmide
JMIDE(4) BSD Kernel Interfaces Manual JMIDE(4)NAME
jmide -- JMicron Technology JMB36x PCIe to SATA II/PATA controller driver
SYNOPSIS
jmide* at pci? dev ? function ? flags 0x0000
ahcisata* at jmide?
DESCRIPTION
The jmide driver supports the JMicron Technology JMB36x IDE controllers.
These PCI-e controllers exist in different flavors (1 or 2 PATA Ultra/133 ports and/or 1 or 2 SATA-II ports), and are highly flexible. The
SATA ports can be attached to the integrated AHCI controller or attached to the PCI IDE channels in PATA emulation, in either single-drive
emulation on each PCI IDE channels, or in master/slave emulation on one of the PCI IDE channels.
When enabled, the AHCI controller can either be on the PCI function 0 or function 2. The PCI IDE controller can also be on either PCI func-
tion, and can share the PCI function with AHCI. The jmide driver supports both the AHCI controller and PCI IDE controller in various config-
urations.
SEE ALSO ahcisata(4), ata(4), atapi(4), intro(4), pci(4), pciide(4), wd(4), wdc(4)AUTHORS
The jmide driver was written by Manuel Bouyer.
BSD July 2, 2007 BSD