Login or Register to Ask a Question and Join Our Community


Solaris

Can not access storedge 3320 info

Login to Discuss or Reply to this Discussion in Our Community

 
Thread Tools Search this Thread
Operating Systems Solaris Can not access storedge 3320 info
# 1  
Old 12-28-2013
Can not access storedge 3320 info
Hey guys I am new at Solaris 10, and I'm having a open error on
/dev/dsk/c1t1d0s6, when booting.
We have a Sunfire v240 running Solaris 10, which is connected to a Storedge 3320, via SCSI.
Any help, is appreciated
# 2  
Old 12-28-2013
Not a lot of information... Please be much more specific! Error messages and so on...
# 3  
Old 12-30-2013
When I boot up I get this error:

Code:
Hostname: gisdata
Configuring devices.
WARNING: md: d12 failed to open. open error on /dev/dsk/c1t1d0s6

checking ufs filesystems
WARNING: md: d12 failed to open. open error on /dev/dsk/c1t1d0s6

WARNING: md: d12 failed to open. open error on /dev/dsk/c1t1d0s6

Can't open /dev/md/rdsk/d12
/dev/md/rdsk/d12: CAN'T CHECK FILE SYSTEM.
/dev/md/rdsk/d12: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY.
fsckall failed with exit code 1.

WARNING - Unable to repair one or more filesystems.
Run fsck manually (fsck filesystem...).

WARNING: md: d12 failed to open. open error on /dev/dsk/c1t1d0s6

svc:/system/filesystem/local:default: WARNING: /sbin/mountall -l failed: exit status 1
Dec 30 07:42:59 svc.startd[7]: svc:/system/filesystem/local:default: Method "/lib/svc/method/fs-local" failed with exit status 95.
[ system/filesystem/local:default failed fatally (see 'svcs -x' for details) ]

Thanks for the help
Last edited by bartus11; 12-30-2013 at 11:56 AM.. Reason: Please use code tags
# 4  
Old 12-30-2013
Now we need the metastat -p and format output... also, do you have config access to the array? check the status via sccli:

Contents
# 5  
Old 12-30-2013
Here are the results. Were do I find sccli?
Code:
root@gisdata # metastat -p
d12 -r c1t0d0s6 c1t10d0s6 c1t11d0s6 c1t1d0s6 c1t2d0s6 c1t3d0s6 c1t4d0s6 c1t5d0s6 c1t8d0s6 c1t9d0s6 -k -i 32b -h hsp013
hsp013 c1t12d0s6 c1t13d0s6

Code:
root@gisdata # format
Unknown controller 'MD21' - /etc/format.dat (15)
Unknown controller 'MD21' - /etc/format.dat (20)
Unknown controller 'MD21' - /etc/format.dat (25)
Unknown controller 'MD21' - /etc/format.dat (151)
Unknown controller 'MD21' - /etc/format.dat (155)
Unknown controller 'MD21' - /etc/format.dat (159)
Unknown controller 'MD21' - /etc/format.dat (163)
Unknown controller 'MD21' - /etc/format.dat (167)
Searching for disks...done


AVAILABLE DISK SELECTIONS:
       0. c0t0d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
          /pci@1c,600000/scsi@2/sd@0,0
       1. c0t1d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
          /pci@1c,600000/scsi@2/sd@1,0
       2. c1t8d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
          /pci@1c,600000/scsi@2,1/sd@8,0
       3. c1t9d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
          /pci@1c,600000/scsi@2,1/sd@9,0
       4. c1t10d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
          /pci@1c,600000/scsi@2,1/sd@a,0
       5. c1t11d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
          /pci@1c,600000/scsi@2,1/sd@b,0
       6. c1t12d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
          /pci@1c,600000/scsi@2,1/sd@c,0
       7. c1t13d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
          /pci@1c,600000/scsi@2,1/sd@d,0
Specify disk (enter its number):

# 6  
Old 12-30-2013
from what I see, there are some disks missing in format output... have you checked the disks in the storage array?
# 7  
Old 12-30-2013
All the lights on the storedge 3300 are on.
And when I ran a probe-scsi-all I got:
Code:
{1} ok probe-scsi-all
/pci@1c,600000/scsi@2,1
Target 8
  Unit 0   Disk     SEAGATE ST373454LSUN72G 032D
Target 9
  Unit 0   Disk     SEAGATE ST373454LSUN72G 032D
Target a
  Unit 0   Disk     SEAGATE ST373454LSUN72G 032D
Target b
  Unit 0   Disk     SEAGATE ST373454LSUN72G 032D
Target c
  Unit 0   Disk     SEAGATE ST373454LSUN72G 032D
Target d
  Unit 0   Disk     SEAGATE ST373454LSUN72G 032D

/pci@1c,600000/scsi@2
Target 0
  Unit 0   Disk     SEAGATE ST373207LSUN72G 045A
Target 1
  Unit 0   Disk     SEAGATE ST373207LSUN72G 045A
Login or Register to Ask a Question

Previous Thread | Next Thread

10 More Discussions You Might Find Interesting

1. Solaris

What is STOREDGE In SOLARIS?

Hi, My question is What is StorEdge in Solairs? What are A1000 AND D1000? (3 Replies)
Discussion started by: aparna66
3 Replies

2. AIX

How to access process and cpu info on AIX?

Hi, may be this is an AIX noob question: my current C++ application runs on Linux and is quite memory consuming. Therefore, the application writes a logfile after it has finished containing memory information, CPU information, information on the running other processes besides my application... (5 Replies)
Discussion started by: DarthVader77
5 Replies

3. Solaris

3320 Disk Array Configuration for Oracle 10

We have a dual-controller StorEdge 3320 disk array with 5 disks (each 320 MB). Four disks have been set up in a RAID-5 configuration with the remaining disk acting as a hot spare. There is a single logical drive which has been partitioned into 3 slices. The disk array is to be simultaneously... (14 Replies)
Discussion started by: StarSol
14 Replies

4. Solaris

Storedge IP

Hi Community, could you provide me a procedure or solaris 10 tool/command or Veritas command to check ths Storedge IP? Thank you!!! (4 Replies)
Discussion started by: Sunb3
4 Replies

5. Solaris

Storedge Configuration

Hi Community, I'm working on Solaris 10 installation with 1 Sun Server V490 and 1 StoredgeTek 3510 (Standalone configuration). I connected the Server to the Storedge with 1 fiber cables and I created 3 LUNs with RAID1 Configuration. Today I've a problem, infact I have to connect a second... (3 Replies)
Discussion started by: Sunb3
3 Replies

6. UNIX for Dummies Questions & Answers

Reading a tape from a StorEdge Autoloader L8.

Does anyone know how to read an LTO tape from this jukebox? (3 Replies)
Discussion started by: dr. phreeze
3 Replies

7. Solaris

Using Enterprise 4500 with storedge D100 and storedge A5200

Sorry if this seems trivial. i have been given a task at work to configure a sun processing server "enterprise 4500" so it can work with the a storage server "storedge A5200" and "storedge D1000" the truth is i have never worked on a sun server before. i need a guideline (step by step) as to... (5 Replies)
Discussion started by: lawalidowu
5 Replies

8. UNIX for Advanced & Expert Users

sun storedge

I just installed sun storedge 3310 connected to a sunfire 280R with a total siz of 680GB and now am trying to create filesystems. issue format command and created my partitions, the largest size of the partition is 170GB. but I try to create new filesystems by using newfs like newfs... (3 Replies)
Discussion started by: hassan2
3 Replies

9. UNIX for Dummies Questions & Answers

Setting up storedge multipack

Can someone please help. I have been given the opportunity to set up a storedge multipack (6 x 36 gig drives). Equipment will attach to sun 420r with 2 x 36 gig drives. Solaris 8/ 4gig memory. Total disk space = (72gig + 216gig(storedge)) I plan to install a fresh copy of solaris on... (5 Replies)
Discussion started by: finster
5 Replies

10. UNIX for Dummies Questions & Answers

veritas/STOREDGE A1000

Hi, I am a Dba and very new to filesystems and stuff. I think that we have Veritas filesystems on my Sun SOlaris 5.8 box, how do I confirm this: all my filesystems are mounted like this: /dev/vx/dsk... Now we are also using disk arrays (storedge a1000) how do I access them from the system.... (1 Reply)
Discussion started by: knarayan
1 Replies
Login or Register to Ask a Question