I think lsnports only posts for adapters logged in to a fabric.
What does
and
show for the
argument?
Hmm, is the "attach" word considered "code", I often wonder what exactly constitutes code...
These 2 Users Gave Thanks to dukessd For This Post:
I have 1 PCI-X Dual Channel Ultra320 SCSI Adapter card for my p570 server. I would like to split the 2 channels for the usage of 2 tape drives in different LPARs. Is that possible?
For example, I have 2 LPARs running in p570 server, LPAR-A configured the Ultra320 card as pci7 in slot... (11 Replies)
How do or what do I need to add PCI / PCIe (PCI Express) parallel ports add-on adapters to OpenServer 6.0.0? OpenServer 5 could see PCI slots but OpenServer 6.0.0 (Original CD or the Re-cut one) required a maintenance pack to be installed? Is this right and how do I check to see if these work? (2 Replies)
I'm floundering here trying to locate a PCI-E 1x HBA that will support an external tape drive in SCO Openserver 6. I was unable to find anything that would work in the compatible hardware list and a call to Adaptec confirmed that PCI-X would've been a better option for the risers in the Dell 2950... (1 Reply)
why is this error message keeps coming once every month. Is this a serious problem?
In the /var/adm/messages file
Nov 26 06:10:42 ids-ldap07 px: WARNING: PCI Express error report:
Nov 26 06:10:42 ids-ldap07 device_path = /pci@1e,600000/pci@0/pci@8, msg_code = 0x30, req_id = 0x340, Nov 26... (7 Replies)
Hello!
I have some X86 desktop computer with G45 embedded dual-head video.
Two monitors can be configured, but with "small" problem: the summ of dimensions in any direction (vert or horis) can't exceed 1680 pix- max sizeof virtual screen area.
Attempts to edit "videoram" parameter in xorg.conf... (0 Replies)
Hi,
I want to change from vscsi to npiv. Is it possible to use both on the same adapter, so we can change the systems one by one, or must we place a second FC adapter in the VIO servers?
Thanks,
Ronald (2 Replies)
Hi,
I am using Aitech sata device sil3132, on powerpc mpc8641. The device is pci express msi compatible. I had enabled msi in device tree for powerpc but still its giving me Cannot translate IRQ index 0 and so on messages.
fsl-msi f7f41600.msi: fsl_msi_setup_hwirq: Cannot translate IRQ index 0... (0 Replies)
I am trying to reload a RP4440 with 2x300gb disks and dual Port Network card, with HPUX 11.11 Sept 2003. When the os boots and and gets to the main menu to install HPUX or run recovery, it cannot find the disks or NIC.
At the OS prompt (after loading files), ioscan shows the Class ba, and shows... (0 Replies)
Discussion started by: mrmurdock
0 Replies
LEARN ABOUT NETBSD
bnx
BNX(4) BSD Kernel Interfaces Manual BNX(4)NAME
bnx -- Broadcom NetXtreme II 10/100/1000 Ethernet device
SYNOPSIS
bnx* at pci?
brgphy* at mii?
DESCRIPTION
The bnx driver supports Broadcom's NetXtreme II product family, such as the BCM5706 PCI-X and BCM5708-BCM5709 PCI Express Ethernet con-
trollers, which includes the following:
o Dell PowerEdge 1950 integrated BCM5708 NIC (10/100/1000baseT)
o Dell PowerEdge 2950 integrated BCM5708 NIC (10/100/1000baseT)
o Dell PowerEdge M710 integrated BCM5709S NIC (1000baseSX)
o HP NC370F PCI-X Multifunction Gigabit server adapter (1000baseSX)
o HP NC370T PCI-X Multifunction Gigabit server adapter (10/100/1000baseT)
o HP NC373F PCI Express Multifunction Gigabit server adapter (1000baseSX)
o HP NC373i PCI Express Multifunction Gigabit embedded server adapter (10/100/1000baseT)
o HP NC380T PCI Express Dual Port Multifunction Gigabit server adapter (10/100/1000baseT)
o IBM xSeries 3550 integrated BCM5708 NIC (10/100/1000baseT)
o IBM xSeries 3650 integrated BCM5708 NIC (10/100/1000baseT)
The NetXtreme II product family is composed of various Converged NIC (or CNIC) Ethernet controllers which support a TCP Offload Engine (TOE),
Remote DMA (RDMA), and iSCSI acceleration, in addition to standard L2 Ethernet traffic, all on the same controller. The following features
are supported in the bnx driver under NetBSD:
IPv4 receive IP/TCP/UDP checksum offload
Jumbo frames (up to 9022 bytes)
VLAN tag insertion
Interrupt coalescing
10/100/1000Mbps operation in full-duplex mode
10/100Mbps operation in half-duplex mode
The bnx driver supports the following media types:
autoselect Enable autoselection of the media type and options. The user can manually override the autoselected mode via ifconfig(8).
10baseT/UTP Set 10Mbps operation. The ifconfig(8) mediaopt option can also be used to select either full-duplex or half-duplex modes.
100baseTX Set 100Mbps (Fast Ethernet) operation. The ifconfig(8) mediaopt option can also be used to select either full-duplex or
half-duplex modes.
1000baseTX Set 1000baseTX operation over twisted pair. Only full-duplex mode is supported.
1000baseSX Set 1000Mbps (Gigabit Ethernet) operation. Both full-duplex and half-duplex modes are supported.
2500baseSX Set 2500Mbps operation. Only full-duplex mode is supported.
The bnx driver supports the following media options:
full-duplex Force full duplex operation.
half-duplex Force half duplex operation.
For more information on configuring this device, see ifconfig(8).
SEE ALSO arp(4), brgphy(4), ifmedia(4), intro(4), mii(4), netintro(4), pci(4), ifconfig(8)HISTORY
The bnx device driver first appeared in NetBSD 4.0.
BSD December 10, 2010 BSD