useradd(1M)															       useradd(1M)

NAME

       useradd - administer a new user login on the system

SYNOPSIS

       useradd	[-c comment] [-d dir] [-e expire] [-f inactive] [-g group] [ -G group [ , group...]] [ -m [-k skel_dir]] [ -u uid [-o]] [-s shell]
       [-A authorization  [,authorization...]] [-P profile  [,profile...]] [-R role  [,role...]] [-p projname] [-K key=value] login

       useradd -D [-b base_dir] [-e expire] [-f inactive] [-g group] [-A authorization	[,authorization...]] [-P profile  [,profile...]] [-R  role
       [,role...]] [-p projname] [-K key=value]

       useradd	adds  a new user to the /etc/passwd and /etc/shadow and /etc/user_attr files. The -A and -P options respectively assign authoriza-
       tions and profiles to the user. The -R option assigns roles to a user. The -p option associates a project with a user. The -K option adds a
       key=value pair to /etc/user_attr for the user. Multiple key=value pairs may be added with multiple -K options.

       useradd	also  creates  supplementary group memberships for the user (-G option) and creates the home directory (-m option) for the user if
       requested. The new login remains locked until the passwd(1) command is executed.

       Specifying useradd -D with the -g, -b, -f, -e, -A, -P, -p, -R, or -K option (or any combination of these options) sets the  default  values
       for the respective fields. See the -D option, below. Subsequent useradd commands without the -D option use these arguments.

       The system file entries created with this command have a limit of 512 characters per line. Specifying long arguments to several options can
       exceed this limit.

       The login (login) and role (role) fields accept a string of no more than eight bytes consisting of characters from the  set  of	alphabetic
       characters,  numeric  characters, period (.), underscore (_), and hyphen (-). The first character should be alphabetic and the field should
       contain at least one lower case alphabetic character. A warning message is displayed if these restrictions are not met.

       The login and role fields must contain at least one character and must not contain a colon (:) or a newline (
).

       The following options are supported:

       -A authorization

	   One or more comma separated authorizations defined in auth_attr(4).	Only a user or role who has grant rights to the authorization  can
	   assign it to an account.

       -b base_dir

	   The default base directory for the system if -d dir is not specified. base_dir is concatenated with the account name to define the home
	   directory. If the -m option is not used, base_dir must exist.

	   Note -  The root file system of any non-global zones must not be referenced with the -b option. Doing so might damage the global zone's
		   file  system,  might  compromise  the  security  of	the  global  zone, and might damage the non-global zone's file system. See
		   zones(5).

       -c comment

	   Any text string. It is generally a short description of the login, and is currently used as the field for the user's  full  name.  This
	   information is stored in the user's /etc/passwd entry.

       -d dir

	   The	home  directory  of  the  new  user. It defaults to base_dir/account_name, where base_dir is the base directory for new login home
	   directories and account_name is the new login name.

       -D

	   Display the default values for group, base_dir, skel_dir, shell, inactive, expire, proj, projname and key=value pairs. When	used  with
	   the	-g,  -b, -f, -e, -A, -P, -p, -R, or -K options, the -D option sets the default values for the specified fields. The default values
	   are:

	   group	   other (GID of 1)

	   base_dir	   /home

	   skel_dir	   /etc/skel

	   shell	   /bin/sh

	   inactive	   0

	   expire	   null

	   auths	   null

	   profiles	   null

	   proj 	   3

	   projname	   default

	   key=value (pairsnotfpresent user_attr(4)

	   roles	   null

       -e expire

	   Specify the expiration date for a login. After this date, no user will be able to access this login. The expire option  argument  is  a
	   date entered using one of the date formats included in the template file /etc/datemsk. See getdate(3C).

	   If  the date format that you choose includes spaces, it must be quoted. For example, you can enter 10/6/90 or "October 6, 1990". A null
	   value (" ") defeats the status of the expired date. This option is useful for creating temporary logins.

       -f inactive

	   The maximum number of days allowed between uses of a login ID before that ID is declared invalid. Normal values are positive  integers.
	   A value of 0 defeats the status.

       -g group

	   An  existing group's integer ID or character-string name. Without the -D option, it defines the new user's primary group membership and
	   defaults to the default group. You can reset this default value by invoking useradd -D -g group.

       -G group

	   An existing group's integer ID or character-string name. It defines the new user's supplementary group membership.  Duplicates  between
	   group with the -g and -G options are ignored. No more than NGROUPS_MAX groups can be specified.

       -K key=value

	   A  key=value  pair  to  add	to  the user's attributes. Multiple -K options may be used to add multiple key=value pairs. The generic -K
	   option with the appropriate key may be used instead of the specific implied key options (-A, -P, -R, -p). See user_attr(4) for  a  list
	   of valid key=value pairs. The "type" key is not a valid key for this option. Keys may not be repeated.

       -k skel_dir

	   A  directory  that contains skeleton information (such as .profile) that can be copied into a new user's home directory. This directory
	   must already exist. The system provides the /etc/skel directory that can be used for this purpose.

       -m

	   Create the new user's home directory if it does not already exist. If the directory already exists, it must have read, write, and  exe-
	   cute permissions by group, where group is the user's primary group.

       -o

	   This option allows a UID to be duplicated (non-unique).

       -P profile

	   One or more comma-separated execution profiles defined in prof_attr(4).

       -p projname

	   Name of the project with which the added user is associated. See the projname field as defined in project(4).

       -R role

	   One or more comma-separated execution profiles defined in user_attr(4).  Roles cannot be assigned to other roles.

       -s shell

	   Full  pathname of the program used as the user's shell on login. It defaults to an empty field causing the system to use /bin/sh as the
	   default. The value of shell must be a valid executable file.

       -u uid

	   The UID of the new user. This UID must be a non-negative decimal integer below MAXUID as defined in <sys/param.h>.  The UID defaults to
	   the	next  available  (unique) number above the highest number currently assigned. For example, if UIDs 100, 105, and 200 are assigned,
	   the next default UID number will be 201. (UIDs from 0-99 are reserved for possible use in future applications.)

       /etc/datemsk

       /etc/passwd

       /etc/shadow

       /etc/group

       /etc/skel

       /usr/include/limits.h

       /etc/user_attr

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWcsu			   |
       +-----------------------------+-----------------------------+
       |Interface Stability	     |Evolving			   |
       +-----------------------------+-----------------------------+

       passwd(1), profiles(1), roles(1), users(1B), groupadd(1M), groupdel(1M), groupmod(1M), grpck(1M), logins(1M), pwck(1M), userdel(1M),  user-
       mod(1M), getdate(3C), auth_attr(4), passwd(4), prof_attr(4), project(4), user_attr(4), attributes(5)

       In case of an error, useradd prints an error message and exits with a non-zero status.

       The following indicates that login specified is already in use:

       UX: useradd: ERROR: login is already in use. Choose another.

       The following indicates that the uid specified with the -u option is not unique:

       UX: useradd: ERROR: uid uid is already in use. Choose another.

       The following indicates that the group specified with the -g option is already in use:

       UX: useradd: ERROR: group group does not exist. Choose another.

       The following indicates that the uid specified with the -u option is in the range of reserved UIDs (from 0-99):

       UX: useradd: WARNING: uid uid is reserved.

       The following indicates that the uid specified with the -u option exceeds MAXUID as defined in <sys/param.h>:

       UX: useradd: ERROR: uid uid is too big. Choose another.

       The following indicates that the /etc/passwd or /etc/shadow files do not exist:

       UX: useradd: ERROR: Cannot update system files - login cannot be created.

       The  useradd  utility adds definitions to only the local /etc/group, etc/passwd, /etc/passwd, /etc/shadow, /etc/project, and /etc/user_attr
       files. If a network name service such as NIS or NIS+ is being used to supplement the local /etc/passwd file with additional entries,  user-
       add  cannot  change information supplied by the network name service. However useradd will verify the uniqueness of the user name (or role)
       and user id and the existence of any group names specified against the external name service.

								    28 Apr 2005 						       useradd(1M)