NJS(4) BSD Kernel Interfaces Manual NJS(4)NAME
njs -- Workbit NinjaSCSI-32 PCI/CardBus SCSI driver
SYNOPSIS
njs* at pci? dev ? function ?
njs* at cardbus? function ?
DESCRIPTION
The njs driver provides support for the following Workbit Bus-Master PCI/CardBus Ultra Narrow SCSI controller chips:
NinjaSCSI-32Bi CardBus / PCMCIA dual mode device (``DuoSCSI''). This driver supports the CardBus mode.
NinjaSCSI-32UDE PCI / CardBus device with DualEdge transfer (40MB/s max.) capability.
SEE ALSO cardbus(4), cd(4), ch(4), pci(4), scsi(4), sd(4), st(4), uk(4)HISTORY
The njs device driver first appeared in NetBSD 1.6.3.
AUTHORS
ITOH Yasufumi
BUGS
DualEdge transfer is not currently supported.
BSD August 26, 2004 BSD
Check Out this Related Man Page
CARDBUS(4) BSD Kernel Interfaces Manual CARDBUS(4)NAME
cardbus, cardslot, cbb -- CardBus driver
SYNOPSIS
cbb* at pci? dev? function ?
cardslot* at cbb?
cardbus* at cardslot?
pcmcia* at cardslot?
XX* at cardbus? function ?
DESCRIPTION
NetBSD provides machine-independent bus support and drivers for CardBus devices.
The cbb device represents the CardBus controller. Each controller has a number of slots, represented by the cardslot devices. A slot can
have either a CardBus card or a PCMCIA card, which are attached with the cardbus or pcmcia devices, respectively.
SUPPORTED DEVICES
NetBSD includes the following machine-independent CardBus drivers, sorted by function and driver name:
Network interfaces
ath Atheros 5210/5211/5212 802.11
atw ADMtek ADM8211 (802.11)
ex 3Com 3c575TX and 3c575BTX
fxp Intel i8255x
ral Ralink Technology RT25x0 (802.11)
rtk Realtek 8129/8139
rtw Realtek 8180L (802.11)
tlp DECchip 21143
Serial interfaces
com Modems and serial cards
SCSI controllers
adv AdvanSys 1200[A,B], 9xx[U,UA]
ahc Adaptec ADP-1480
njs Workbit NinjaSCSI-32
USB controllers
ehci Enhanced Host Controller (2.0)
ohci Open Host Controller
uhci Universal Host Controller
IEEE1394 controllers
fwohci OHCI controller
Disk and tape controllers
siisata Silicon Image SATA-II controllers.
DIAGNOSTICS
cbb devices may not be properly handled by the system BIOS on i386-family systems. If, on an i386-family system, the cbb driver reports
cbb0: NOT USED because of unconfigured interrupt
then enabling
options PCI_ADDR_FIXUP
options PCI_BUS_FIXUP
options PCI_INTR_FIXUP
or (if ACPI is in use)
options PCI_INTR_FIXUP_DISABLED
in the kernel configuration might be of use.
SEE ALSO adv(4), ahc(4), ath(4), atw(4), com(4), ehci(4), ex(4), fxp(4), njs(4), ohci(4), options(4), pci(4), pcmcia(4), ral(4), rtk(4), rtw(4),
siisata(4), tlp(4), uhci(4)HISTORY
The cardbus driver appeared in NetBSD 1.5.
BUGS
Memory space conflicts
NetBSD maps memory on Cardbus and PCMCIA cards in order to access the cards (including reading CIS tuples on PCMCIA cards) and access the
devices using the RBUS abstraction. When the mapping does not work, PCMCIA cards are typically ignored on insert, and Cardbus cards are rec-
ognized but nonfunctional. On i386, the kernel has a heuristic to choose a memory address for mapping, defaulting to 1 GB, but choosing 0.5
GB on machines with less than 192 MB RAM and 2 GB on machines with more than 1 GB of RAM. The intent is to use an address that is larger
than available RAM, but low enough to work; some systems seem to have trouble with addresses requiring more than 20 address lines. On i386,
the following kernel configuration line disables the heuristics and forces Cardbus memory space to be mapped at 512M; this value makes Card-
bus support (including PCMCIA attachment under a cbb) work on some notebook models, including the IBM Thinkpad 600E (2645-4AU) and the Compaq
ARMADA M700:
options RBUS_MIN_START="0x20000000"
BSD July 19, 2009 BSD