I have a server I would like to disable 802.3x flow control on. The host is Linux (CentOS 4.4 x86_64 w/ 2.6.9-42.0.3.EL kernel,) and I'm using the ns83820 driver for the ethernet interface in question.
I've tried looking at the driver parameters (modinfo ns83820) and using ethtool (ethtool -a eth0,) but neither exposes / supports any configurability for pause frames.
In my desperation, I've even resorted to fiddling with the driver source to flip it off, but don't understand enough c to make sure I'm not breaking something else in the process. In the kernel source at drivers/net/ns83820.c, I find the following snippet:
I *think* I can just get rid of PCR_PAUSE_CNT without breaking something else (for example, I see MCAST in there, and I definitely want to retain multicast support.)
Hi,
We observe below logs from switch - the database servers rebooted becaause they couldn't do I/O on vfiler -Any pointers looking at below logs please?
Switch logs:
2016 Apr 30 07:41:16.729 EAG-ECOM-POD111GPU-SWF1 %ETHPORT-5-IF_DOWN_LINK_FAILURE: Interface Ethernet152/1/8 is down (Link... (0 Replies)
In my bash script I want to say "if argument 2 is anything except x, y or z, than echo this" (x y and z being words).
So my script looks like this:
if ]
then
echo "unrecognized input: $2"
fi
This usually works but than I also want to say "if argument 2 IS x, y, or z, but argument 4 is... (4 Replies)
I am wiping off the dust to my shell scipting days and had this question: I have this script that I have created, and cannot figure out where my flow control issue is within this script.
#!/bin/ksh
#Basic script to backup server
#Home directories to the external ... (2 Replies)
hi ,
I am new to scripting, i have a doubt can any one pls solve it for me
the code is not working
set users = (user1 user2 user3)
echo The users are
echo $users
echo Enter the USER NAME
set USER_NAME = $<
set i = 1;
for ( i = 1; i <= $#users; i++ )
if ( $USER_NAME == $users )... (1 Reply)
Hi guys.I'm just beginner of python.
I'm just trying to do some analysis on simple input file.
it has 6 columns and i want to consider k,l and m,n if i and j are +
after that checking which value is greater or lower in k,l and m,n
I have included logic header just to explain what I was... (4 Replies)
My question is such:
I want to control the bandwidth of my users and cap there speed on the network. I was told by a Cisco rep that it is better to police or control the bandwidth at the switch and not via the router. It that the correct place to control bandwidth at the switch or would it be... (0 Replies)
I am using informix RDBMS over SUSE LINUX. In linux if you press control-c it acts as an interrupt key. In my program I have used control-c to perform certain functions but it is being overriden by interrupt function of control-c key combination of SUSE LINUX. Kindly suggest me a solution by which... (1 Reply)
hello im facing a queer problem when i execute the foll code in unix
# include <stdio.h>
# include <unistd.h>
main(int argc,char *argv)
{
FILE *fp = fopen("/ras/chirag/fifotest/file.fifo","a");
int i=1;
fprintf(fp,argv);
printf("I SLEEP");
system("date");
for (i=0;i<50;i++)... (2 Replies)
how can i create a script with a correct control flow/loop(?) to
provide output from 3 files?
file1
one
two
three
file2
yellow
red
orange
file3
banana
apples
cantaloupes
output file:
one (1 Reply)
ATU(4) BSD Kernel Interfaces Manual ATU(4)NAME
atu -- Atmel at76c50x 802.11B wireless network interfaces
SYNOPSIS
atu* at uhub? port ?
DESCRIPTION
The atu driver provides support for wireless network adapters based around the Atmel at76c503, at76c503a, at76c505, and at76c505a USB
chipsets.
Supported features include 802.11 and 802.3 frames, power management, BSS, IBSS, ad-hoc, and host-based access point mode.
The atu driver encapsulates all IP and ARP traffic as 802.11 frames, however it can receive either 802.11 or 802.3 frames. Transmit speed is
selectable between 1Mbps fixed, 2Mbps fixed, 2Mbps with auto fallback, 5.5Mbps, 8Mbps, or 11Mbps depending on your hardware.
Four different radio chipsets are used along with the device, each requiring a different firmware.
By default, the atu driver configures the card for BSS operation (aka infrastructure mode). This mode requires the use of an access point
(base station).
For more information on configuring this device, see ifconfig(8).
The following devices are among those supported by the atu driver:
Acer Peripherals AWL400
AcerP AWL-300
Aincomm AWU2000B
Atmel 2662W-V4
Atmel BW002
Atmel DWL-120
Atmel WL-1330
Belkin F5D6050
Geowave GW-US11S
Linksys WUSB11
Linksys WUSB11-V28
Ovislink AirLive
SMC 2662W-AR
SEE ALSO arp(4), ifmedia(4), intro(4), netintro(4), usb(4), ifconfig(8), wiconfig(8)AUTHORS
The atu driver was written by Daan Vreeken and ported to OpenBSD by Theo de Raadt and David Gwynne. The OpenBSD driver was then ported to
NetBSD by Jesse Off <joff@NetBSD.org>.
BSD January 23, 2005 BSD