Please can someone give me a hint on this, when I list the targets, I see two o them:
Code:
#iscsiutil -p
Operational Target Information
------------------------------
Target # 1
-----------
Target Name : iqn.1992-08.com.netapp:sn.142241859
Target Alias :
No. of Target Addresses : 2
Target Address # 1
-------------------
IP Address : 192.168.1.252
iSCSI TCP Port : 3260
iSCSI Portal Group Tag : 1000
User Configured:
----------------
Authenticaton Method :
CHAP Method : CHAP_UNI
Initiator CHAP Name :
CHAP Secret :
Header Digest : None,CRC32C (default)
Data Digest : None,CRC32C (default)
Target Address # 2
-------------------
IP Address : 10.0.0.50
iSCSI TCP Port : 3260
iSCSI Portal Group Tag : 1002
then, when I try to delete the first one:
Code:
#iscsiutil -d -I 192.168.1.252 -P 3260 -M 1000
iscsiutil: Delete failed. The target address "192.168.1.252:3260,1000" is not present in the driver repository: Invalid argument
No volume is attached to this! Does anyone came across that message?
To Delete an iSCSI discovery target IP address from the kernel registry, use:
# iscsiutil [/dev/iscsi] -d -I <ip-address> [-P <tcp-port>][-M <portal-grp-tag>]
<ip-address> The ip_address specified can be an IPv4 formatted address or a DNS name
<tcp-port> A TCP port may be specified for the iSCSI target. If no port is specified, the default iSCSI target port (3260) will be used.
<portal-grp-tag> The target portal group tag may be specified (a value from 0 to 65535 inclusive); otherwise a default value of 1 will be used.
---------- Post updated at 03:45 AM ---------- Previous update was at 03:37 AM ----------
the error shows IP "192.168.1.252" do not find .
maybe you execute
rsync with --delete won't honor the delete if the source is something/*. I want the delete to work, but not to delete directories on the target that are peer to the intended directory. For example, using these source and target file structures:
Source on desktop:
~/
Money/
... (4 Replies)
I need boot any images from iSCSI and I'd like to boot from linux console of a previous LiveCD booted. Is possible, without gpxe, ipxe firmware or similar? With a simple iSCSI initiator for example? (1 Reply)
Hi,
I wanted to configure new iscsi port on HPUX system, i added the target port address and configured it, once done, went to array side and searched for that host iqn number , but was nt able to find the same, came to host, then when i ran "iscsiutil -pVS" command it gave me below result
... (0 Replies)
hi all,
i'm new here and i have a question,
i wanted to know, what should happen if i delete a LUN that is already mounted on one of my initiators.
thanks! (3 Replies)
Hi all,
I have a text file with a lot of records.
In each records I have tags like this:
=952 \\$aBNCS-CH\\$bBNCS-CH\\$h1989\\$oBNCS-CH0000001\\$pBNCS-CH0000001\\$yJNL
=952 \\$aBNCS-C.UNIV\\$bBNCS-C.UNIV\\$h1974-77.\\$oBNCS-C.UNIV0000001\\$pBNCS-C.UNIV0000001\\$yJNL
=952... (4 Replies)
I get "mount: I/O error" when trying to mount an existing FAT32 iSCSI target. I also tried formatting the iSCSI target with fdisk and got
fdisk: "Error in ioctl DKIOCSMBOOT"
Details --
According to the format command, the whole disk is allocated to slice 6 and /dev/rdsk shows this as:... (1 Reply)
I get "mount: I/O error" when trying to mount an existing FAT32 iSCSI target. I also tried formatting the iSCSI target with fdisk and got
fdisk: "Error in ioctl DKIOCSMBOOT"
Details --
According to the format command, the whole disk is allocated to slice 6 and /dev/rdsk shows this as:... (0 Replies)
I'm using Bacula as my backup system, with full backups going to an LTO2 tape drive, while differentials and incrementals go to a disk array on my main server, babylon4. The tape drive is currently attached to a separate machine, because babylon4 does not have a SCSI controller, nor a free PCI-X... (0 Replies)
Hello,
I am trying to breakdown the cXtXdX (specifically tX) part of an iscsi device.
I know in the fibre SAN world, this tX will usually be a combination of the path to device/device WWN.
From what I understand in iscsi world it is similar, breaking down into... (0 Replies)
Hi all
iscsiadm / iscsitadm.
Ive created two devices on a host.
# iscsitadm list target
Target: 1-disk0
iSCSI Name: iqn.1986-03.com.sun:02:f105ddf3-52a4-ed7a-9590-c3d354b8fc32.1-disk0
Connections: 1
Target: 1-disk1
iSCSI Name:... (0 Replies)
