11-22-2005
Modem
hi folks,
i am looking for a analog modem to use it with a solaris9 sparc mashine. as far as i know, solaris communicates with the modem using AT-commands. so do i need a special modem for solaris or just a modem? i am open for everything. PCI-modem, seriell modem, usb modem. what are you using? i would be great if the vendor would provide driver or configuration examples.
thanks a lot
regards PRESSY
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
Hi everyone
I am having some real difficulties getting a dial in modem to work on one of my HP boxes. It's a mux modem on port 7 which I have set up at 9600 baud.
I can dial in, the handshakes are completed, but then it returns incoherent characters on the emulation screen. I think my dial in... (1 Reply)
Discussion started by: alwayslearningunix
1 Replies
2. UNIX for Advanced & Expert Users
I've spent enough time trying to put on work Lucent Winmodem in my armada M300 (compaq laptop) I use Mandrake 8.0 but as soon as i get connected
and prompmts appears modem shutsdown.
Does any one had a similar situation, solved it?
cheers (2 Replies)
Discussion started by: alex blanco
2 Replies
3. UNIX for Dummies Questions & Answers
Hi!
I have a little prob with dialing up to the internet... When I try connect, it says "Sorry, modem is busy"...
Specs:
Laptop
56K modem
Slackware 8.0
Kernel 2.4.5
Cheers;) (4 Replies)
Discussion started by: satan404
4 Replies
4. UNIX for Dummies Questions & Answers
Specs:
Dlink DFE-560EL external modem.
RedHat 7.1
How do you turn off the modem volume? I am getting annoyed of it beeping everytime I use it but there is no switch on the hardware to tune down the volume.
I have tried using minicom and use the following commands:
ATL0
ATM0
Next, I... (2 Replies)
Discussion started by: arz
2 Replies
5. UNIX for Dummies Questions & Answers
Pleaseee... Helpppp.... !!!
I am using SCO Open Server 5.05. Recently, i have upgraded the system which means transfer all apps and data to the new system. Everything work well except one thing. On my old system i have an external modem which to dial out. Now that i use the same modem on... (4 Replies)
Discussion started by: jackpotp
4 Replies
6. UNIX for Dummies Questions & Answers
I have got Suse 8.0 by using a modem (US Robotics 56K Faxmodem Ext).
During connection i got the error 16. I tried it under RedHat and Mandrake too.....same problem. What can i do ?
Thanx...a lot...
Logfile:
SuSE Meta pppd (smpppd), Version 0.73 on zuhause.
wwwoffle not is running ... (1 Reply)
Discussion started by: Pennywize
1 Replies
7. UNIX for Dummies Questions & Answers
Ok. I tried following the directions from some of the other threads, but I've hit a road block.
I have red hat 7.3 and I installed the hcf package:
hcfpcimodem-0.99lnxtbeta03042700k2.4.18_3-1rh.i386.rpm
It installed ok, no errors, but I still can't get linux to find my modem. I've tried... (2 Replies)
Discussion started by: lawadm1
2 Replies
8. UNIX for Dummies Questions & Answers
Im using Kinternet with a Lucent modem on Suse 9.0
Ive installed the ltmodem driver and suse says the device is ready and configured. Ive configured it at /dev/ttyS0
This is the log that Kinternet gives after trying to connect:
SuSE Meta pppd (smpppd-ifcfg), Version 1.06 on linux.
Status... (0 Replies)
Discussion started by: Synbios
0 Replies
9. Solaris
Hi all,
Is there any difference between a null modem cable or a modem cable ?
i assume that a null modem cable is a normal cable that i used from cpu serial ports to a modem for dialup.
please correct if i am wrong,
thks (2 Replies)
Discussion started by: waterbear
2 Replies
10. IP Networking
How to get information that where is my modem configured in /dev.
I have two modems configured in my device .. one is USB and other is PCI modem.. USB is detected as /dev/USB0. but how to see about PCI modem? (0 Replies)
Discussion started by: s123.radha
0 Replies
LEARN ABOUT DEBIAN
baycom
BAYCOM(9) Kernel Reference Guide BAYCOM(9)
NAME
baycom - amateur (AX.25) packet radio network driver for baycom modems
SYNOPSIS
#include <linux/baycom.h>
#include <linux/hdlcdrv.h>
DESCRIPTION
The driver currently supports three different modems: ser12, par96 and par97.
ser12
This is a very simple 1200 baud AFSK modem. The modem consists only of a modulator/demodulator chip, usually a TI TCM3105. The computer is
responsible for regenerating the receiver bit clock. The modem connects to a serial port, hence the name. Since the serial port is not used
as an async serial port, the kernel driver for serial ports cannot be used, and this driver only supports standard serial hardware (8250,
16450, 16550).
par96
This is a modem for 9600 baud FSK compatible to the G3RUH standard. The modem does all the filtering and regenerates the receiver clock.
Data is transferred from and to the PC via a shift register. The shift register is filled with 16 bits and an interrupt is signalled. The
PC then empties the shift register in a burst. This modem connects to the parallel port, hence the name.
par97
This is a redesign of the par96 modem by Henning Rech, DF9IC. The modem is protocol compatible to par96, but uses only three low power ICs
and can therefore be fed from the parallel port and does not require an additional power supply.
IOCTL CALLS
The ioctl calls follow the implementation in the hdlcdrv.
BAYCOMCTL_GETMODEMTYPE
returns the modem type (i.e. ser12 or par96) and the options in effect (currently only the source of the DCD signal)
BAYCOMCTL_SETMODEMTYPE
sets the modem type and the options. Only superuser can do this.
BAYCOMCTL_GETDEBUG
return some debugging values. Not always available.
SEE ALSO
baycom (9), soundmodem (9), linux/drivers/net/hdlcdrv.c,
AUTHOR
baycom was written by Thomas Sailer, HB9JNX/AE4WA, (t.sailer@alumni.ethz.ch).
Linux 2.1.x 2 October 1996 BAYCOM(9)