01-10-2003
modem
I have got Suse 8.0 by using a modem (US Robotics 56K Faxmodem Ext).
During connection i got the error 16. I tried it under RedHat and Mandrake too.....same problem. What can i do ?
Thanx...a lot...
Logfile:
SuSE Meta pppd (smpppd), Version 0.73 on zuhause.
wwwoffle not is running
Selection of interface/provider "ppp0"/"Arcor (1)" succeeded.
Starting connection. (2002-12-31 15:21:17 CET)
pppd: Plugin passwordfd.so loaded.
pppd: Perms of /dev/ttyS1 are ok, no 'mesg n' neccesary.
pppd: --> WvDial: Internet dialer version 1.42
pppd: --> Initializing modem.
pppd: --> Sending: ATZ
pppd: ATZ
pppd: OK
pppd: --> Sending: AT Q0 V1 E1 S0=0 &C1 &D2
pppd: AT Q0 V1 E1 S0=0 &C1 &D2
pppd: OK
pppd: --> Sending: ATM1
pppd: ATM1
pppd: OK
pppd: --> Modem initialized.
pppd: --> Sending: ATDT0192070
pppd: --> Waiting for carrier.
pppd: ATDT0192070
pppd: CONNECT 50666/ARQ
pppd: --> Carrier detected. Chatmode finished.
pppd: Serial connection established.
pppd: using channel 1
pppd: Using interface ppp0
pppd: Connect: ppp0 <--> /dev/ttyS1
pppd: sent [LCP ConfReq id=0x1
]
pppd: sent [LCP ConfReq id=0x1
]
pppd: sent [LCP ConfReq id=0x1
]
pppd: sent [LCP ConfReq id=0x1
]
pppd: sent [LCP ConfReq id=0x1
]
pppd: sent [LCP ConfReq id=0x1
]
pppd: sent [LCP ConfReq id=0x1
]
pppd: sent [LCP ConfReq id=0x1
]
pppd: sent [LCP ConfReq id=0x1
]
pppd: sent [LCP ConfReq id=0x1
]
pppd: sent [LCP ConfReq id=0x1
]
pppd: sent [LCP ConfReq id=0x1
]
pppd: Hangup (SIGHUP)
pppd: Modem hangup
pppd: Connection terminated.
pppd died: A modem hung up the phone (exit code 16)
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
Hi everyone
I am having some real difficulties getting a dial in modem to work on one of my HP boxes. It's a mux modem on port 7 which I have set up at 9600 baud.
I can dial in, the handshakes are completed, but then it returns incoherent characters on the emulation screen. I think my dial in... (1 Reply)
Discussion started by: alwayslearningunix
1 Replies
2. UNIX for Advanced & Expert Users
I've spent enough time trying to put on work Lucent Winmodem in my armada M300 (compaq laptop) I use Mandrake 8.0 but as soon as i get connected
and prompmts appears modem shutsdown.
Does any one had a similar situation, solved it?
cheers (2 Replies)
Discussion started by: alex blanco
2 Replies
3. UNIX for Dummies Questions & Answers
Hi!
I have a little prob with dialing up to the internet... When I try connect, it says "Sorry, modem is busy"...
Specs:
Laptop
56K modem
Slackware 8.0
Kernel 2.4.5
Cheers;) (4 Replies)
Discussion started by: satan404
4 Replies
4. UNIX for Dummies Questions & Answers
Specs:
Dlink DFE-560EL external modem.
RedHat 7.1
How do you turn off the modem volume? I am getting annoyed of it beeping everytime I use it but there is no switch on the hardware to tune down the volume.
I have tried using minicom and use the following commands:
ATL0
ATM0
Next, I... (2 Replies)
Discussion started by: arz
2 Replies
5. UNIX for Dummies Questions & Answers
Pleaseee... Helpppp.... !!!
I am using SCO Open Server 5.05. Recently, i have upgraded the system which means transfer all apps and data to the new system. Everything work well except one thing. On my old system i have an external modem which to dial out. Now that i use the same modem on... (4 Replies)
Discussion started by: jackpotp
4 Replies
6. UNIX for Dummies Questions & Answers
Ok. I tried following the directions from some of the other threads, but I've hit a road block.
I have red hat 7.3 and I installed the hcf package:
hcfpcimodem-0.99lnxtbeta03042700k2.4.18_3-1rh.i386.rpm
It installed ok, no errors, but I still can't get linux to find my modem. I've tried... (2 Replies)
Discussion started by: lawadm1
2 Replies
7. UNIX for Dummies Questions & Answers
Im using Kinternet with a Lucent modem on Suse 9.0
Ive installed the ltmodem driver and suse says the device is ready and configured. Ive configured it at /dev/ttyS0
This is the log that Kinternet gives after trying to connect:
SuSE Meta pppd (smpppd-ifcfg), Version 1.06 on linux.
Status... (0 Replies)
Discussion started by: Synbios
0 Replies
8. Solaris
Hi all,
Is there any difference between a null modem cable or a modem cable ?
i assume that a null modem cable is a normal cable that i used from cpu serial ports to a modem for dialup.
please correct if i am wrong,
thks (2 Replies)
Discussion started by: waterbear
2 Replies
9. Solaris
hi folks,
i am looking for a analog modem to use it with a solaris9 sparc mashine. as far as i know, solaris communicates with the modem using AT-commands. so do i need a special modem for solaris or just a modem? i am open for everything. PCI-modem, seriell modem, usb modem. what are you using? i... (1 Reply)
Discussion started by: pressy
1 Replies
10. IP Networking
How to get information that where is my modem configured in /dev.
I have two modems configured in my device .. one is USB and other is PCI modem.. USB is detected as /dev/USB0. but how to see about PCI modem? (0 Replies)
Discussion started by: s123.radha
0 Replies
IRNETD(4) Linux-IrDA man pages IRNETD(4)
NAME
irnetd - Handle automatically incoming IrNET connections
SYNOPSIS
irnetd [ppp-options]
DESCRIPTION
Irnetd is a very simple daemon automatically handling incoming IrNET connections. Every time a peer attempt to connect to the local com-
puter, irnetd generates the relevant pppd(8) command to starts an IrNET server handling this peer.
PARAMETERS
ppp-options
Override the default pppd(8) options. These options will just be passed on the command line of pppd(8). The default options are
"noauth nolock connect-delay 0 idle 10" which should fit most usages.
AUTHOR
Jean Tourrilhes - jt@hpl.hp.com
FILES
/dev/irnet
SEE ALSO
irda(7), irnet(4), pppd(8), irattach(8), irdadump(8).
irda-utils 2 May 2003 IRNETD(4)