11-11-2002
2-Ch RAID Problem in SCO Open Server
Help, if possible.
In SCO Open Server with installation of two-channel RAID controller the following happens: on the channel 0 disk array is seen by an operational system, and on the channel 1 array is not seen (simultaneously). That is the operational system can not simultaneously use more than one channel of the controller. The controller - IBM ServeRAID 4Mx.
Can be, any are necessary specific of set-up?
Beforehand thank you.
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
I'm new to the whole Unix thing and have inherited a network running Macs, Windows 2000 and Unix. The Unix side is very suspect at this point and I want to change out the server.
I'd love to use one of the new Apple servers but can't find any info on what "flavors" of Unix it will run. Specificly... (3 Replies)
Discussion started by: matthewd
3 Replies
2. UNIX for Advanced & Expert Users
I'm in the process of installing SCO Open Server 5.05 on the following platform:
Hardware:
IBM 300PL
64 MB RAM
Yamaha 16/4/16 CDRW (Internal defined on SCSI ID 3 LUN 0)
I'm able to boot from the CD and advance to the Installation screen but when it asks for where the media source will... (3 Replies)
Discussion started by: budrito
3 Replies
3. SCO
Dear All,
I am considering installing SCO Open Server as an alternative to MS Exchange. Has anybody had any real world experience of using Open Office?
Thanks,
TC. (1 Reply)
Discussion started by: TCuk
1 Replies
4. Shell Programming and Scripting
Hi Engg. ! :mad:
I have a harddisk on which SCO UNIX Open Server was installed. There was some data (in .dbf format) on it. Present condition of HDD is that it is not booting. Now I want to mount this HDD through other HDD on which SCO UNIX Open Server is installed by attaching... (0 Replies)
Discussion started by: Niraj Gopal Sha
0 Replies
5. SCO
How can I to know procesor type. (1 Reply)
Discussion started by: Batya
1 Replies
6. Filesystems, Disks and Memory
Hello Moto
I hope someone can help
We's here at work, have a unix box with sco openserver 5 on it, so it has a nice gui interface.. and also a fair few windows computers..
a system admin guy b4 me, has set up a user called neil, which can, when u try to access the unix box using windows... (2 Replies)
Discussion started by: haggo
2 Replies
7. SCO
Hi,
in our business we have a formerly (few years ago) installed computer with an openserver SCO 5.05
there are 3 network cards in it. one on board and two 3Com-cards
Looking with ifconfig (or scoadmin) they seemed to be installed correctly.
IP-Adress, netmask broadcas looks OK.
But no... (3 Replies)
Discussion started by: klex
3 Replies
8. SCO
I have to purchase SCO Open Server 6.0, so I want to know from where I can get SCO Open Server 6.0 and what is the min. cost in which I can avail this.
Thanks and Regards
Himanshu
Software Engineer
R&D Department (4 Replies)
Discussion started by: ghimanshu
4 Replies
9. SCO
Dear Team ,
how i can configure raid 1 (mirroring) using ide hdd in sco open unix 5
i have two 80gb identical hdd (same make/model)
thanx (0 Replies)
Discussion started by: sudhir69
0 Replies
10. SCO
Hi,
Completely new to UNIX - so be gentle
Cut a long story short, we have a micros 8700 system (eclipse) that needs the Micros 8700 software installed.
The system needs UNIX and I have downloaded and successfully installed SCO open Server 6 and can log into root e.t.c.
Now I have... (13 Replies)
Discussion started by: kennyruss
13 Replies
LEARN ABOUT OSF1
do_config
do_config(9r) do_config(9r)
NAME
do_config - EISA/ISA: Initializes the device to its assigned configuration
SYNOPSIS
void do_config(
struct controller *ctlr_p );
ARGUMENTS
Specifies a pointer to the controller structure associated with the controller to be configured. The do_config routine obtains the device
to initialize through its controller's associated controller structure pointer.
DESCRIPTION
The do_config routine initializes the specified controller based on its power-up resource assignments. If the device uses either an inter-
rupt or a DMA channel, then do_config also performs any setup requirements. For example, for controllers that connect to the EISA bus,
do_config initializes the controller according to the parameters specified in the EISA configuration file.
NOTES
The do_config routine is a generic interface that maps to a bus-specific interface that actually initializes the specified device. Using
this routine to initialize a device makes the driver more portable across different bus architectures. Not all buses support the do_config
routine.
RETURN VALUES
None
SEE ALSO
Routines: get_config(9r), get_info(9r)
Data Structures: controller(9s)
do_config(9r)