11-11-2002
2-Ch RAID Problem in SCO Open Server
Help, if possible.
In SCO Open Server with installation of two-channel RAID controller the following happens: on the channel 0 disk array is seen by an operational system, and on the channel 1 array is not seen (simultaneously). That is the operational system can not simultaneously use more than one channel of the controller. The controller - IBM ServeRAID 4Mx.
Can be, any are necessary specific of set-up?
Beforehand thank you.
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
I'm new to the whole Unix thing and have inherited a network running Macs, Windows 2000 and Unix. The Unix side is very suspect at this point and I want to change out the server.
I'd love to use one of the new Apple servers but can't find any info on what "flavors" of Unix it will run. Specificly... (3 Replies)
Discussion started by: matthewd
3 Replies
2. UNIX for Advanced & Expert Users
I'm in the process of installing SCO Open Server 5.05 on the following platform:
Hardware:
IBM 300PL
64 MB RAM
Yamaha 16/4/16 CDRW (Internal defined on SCSI ID 3 LUN 0)
I'm able to boot from the CD and advance to the Installation screen but when it asks for where the media source will... (3 Replies)
Discussion started by: budrito
3 Replies
3. SCO
Dear All,
I am considering installing SCO Open Server as an alternative to MS Exchange. Has anybody had any real world experience of using Open Office?
Thanks,
TC. (1 Reply)
Discussion started by: TCuk
1 Replies
4. Shell Programming and Scripting
Hi Engg. ! :mad:
I have a harddisk on which SCO UNIX Open Server was installed. There was some data (in .dbf format) on it. Present condition of HDD is that it is not booting. Now I want to mount this HDD through other HDD on which SCO UNIX Open Server is installed by attaching... (0 Replies)
Discussion started by: Niraj Gopal Sha
0 Replies
5. SCO
How can I to know procesor type. (1 Reply)
Discussion started by: Batya
1 Replies
6. Filesystems, Disks and Memory
Hello Moto
I hope someone can help
We's here at work, have a unix box with sco openserver 5 on it, so it has a nice gui interface.. and also a fair few windows computers..
a system admin guy b4 me, has set up a user called neil, which can, when u try to access the unix box using windows... (2 Replies)
Discussion started by: haggo
2 Replies
7. SCO
Hi,
in our business we have a formerly (few years ago) installed computer with an openserver SCO 5.05
there are 3 network cards in it. one on board and two 3Com-cards
Looking with ifconfig (or scoadmin) they seemed to be installed correctly.
IP-Adress, netmask broadcas looks OK.
But no... (3 Replies)
Discussion started by: klex
3 Replies
8. SCO
I have to purchase SCO Open Server 6.0, so I want to know from where I can get SCO Open Server 6.0 and what is the min. cost in which I can avail this.
Thanks and Regards
Himanshu
Software Engineer
R&D Department (4 Replies)
Discussion started by: ghimanshu
4 Replies
9. SCO
Dear Team ,
how i can configure raid 1 (mirroring) using ide hdd in sco open unix 5
i have two 80gb identical hdd (same make/model)
thanx (0 Replies)
Discussion started by: sudhir69
0 Replies
10. SCO
Hi,
Completely new to UNIX - so be gentle
Cut a long story short, we have a micros 8700 system (eclipse) that needs the Micros 8700 software installed.
The system needs UNIX and I have downloaded and successfully installed SCO open Server 6 and can log into root e.t.c.
Now I have... (13 Replies)
Discussion started by: kennyruss
13 Replies
chs(7D) Devices chs(7D)
NAME
chs - IBM ServeRAID PCI host adapter driver
DESCRIPTION
The chs driver is the IBM ServeRAID PCI controller driver.
PRECONFIGURATION
Known Problems and Limitations
To prevent data loss, a SCSI disk drive that is not defined as part of any physical pack within a logical drive will not be accessible
through the Solaris operating environment.
CONFIGURATION
Auto-configuration code determines whether the adapter is present at the configured address and what types of devices are attached to it.
The IBM ServeRAID is primarily used as a disk array (system drive) controller.
To configure the attached disk arrays, you must configure the controller (using the configuration utilities provided by the hardware manu-
facturer) before booting the Solaris operating environment You use the configuration utilities to set RAID levels, stripe parameters, cache
mechanisms and perform other functions. For more information, see the user manual supplied with your hardware.
FILES
/kernel/drv/chs.conf chs configuration file
/dev/dsk/cndn[s|p]n block device
/dev/rdsk/cndn[s|p]n raw device where:
cn controller n
dn LUN n (0-7)
sn UNIX system slice n (0-15)
pn fdisk(1M) partition(0)
ATTRIBUTES
See attributes(5) for a description of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
|Architecture |x86 |
+-----------------------------+-----------------------------+
SEE ALSO
fdisk(1M), attributes(5), cmdk(7D)
SunOS 5.10 27 November 2000 chs(7D)