hi. I am newbie in Unix. I wanted to install Free BSD 5.2.1 to my computer which winXp was already installed. But i couldn't.
I chose Standard. Then it said you are going to use dos style fdisk partitioning. Then a window displayed begining like this.
WARNING: A geometry of 155127/16/63 for... (0 Replies)
helo my sysem is running on redhat 9.
now i want to take data from redhat 9 pc to pen drive.
but when i plug it it is not detected.
can u tell me how to mount pendrive on redhat9.
amit (1 Reply)
Hello there,
My mulithreaded application (which is too large to represent the source code here) is crashing after installing FreeBSD 7.1-RELEASE/amd64.
It worked properly on others machines (Dual Cores with 4GB of RAM - FreeBSD 6.2-RELEASE/i386).
The current machine has 2x Core 2 Duo... (1 Reply)
Hi all,
Can anybody help me with how I can connect a usb pendrive or external disk to a Sun Server which runs on Solaris 9? I am able to connect the usb drive to a windows server easily and copy files but am wondering if it is possible to do that with Solaris.
Any help will be appreciated. thanks. (3 Replies)
Hi,
I am using compaq t5207tu model with 60gb harddisk and 2.5gb RAM.Its dual boot-Windows XP and Solaris. I tried installing SUN xVM on solaris to make client -server architecture (32 bit processor and 32 bit OS ) -guest OS (solaris 10)on host OS(Solaris 10). But whenever i try to install... (1 Reply)
Hi Gurus,
in linux I am unable to access my pendrive(i am even not seeing the icon or location for my pendrive ).
Please anyany could help me to get rid of this issue.
regards,
Sanjay
:) (4 Replies)
Holla,
I have been trying to install a recent distro, with a minimum X such as jwm, but unfortunately my cdrom is broken and I can only boot the USB port, with a pendrive.
AMD K6 3D is today too old for being for linux.
Is there an image of slackware than runs that processor and that can... (5 Replies)
I've "installed" LM 19.1 to a PNY 16Gb(2.0) pendrive. I have a few issues that I'd like to resolve. First and foremost, the O.S. experiences "lagging" issues and to a lesser degree, freezing. Example: Complete "boot-up" (from start to complete "home" page) can take upwards of 7 mins. Then when... (10 Replies)
Discussion started by: 69Rixter
10 Replies
LEARN ABOUT REDHAT
sane-find-scanner
sane-find-scanner(1) General Commands Manual sane-find-scanner(1)NAME
sane-find-scanner - find SCSI and USB scanners and their device files
SYNOPSIS
sane-find-scanner [-h|-?] [-v] [-q] [-f] [devname]
DESCRIPTION
sane-find-scanner is a command-line tool to find SCSI and some USB scanners and determine their Unix device files. It's part of the sane-
backends package.
For SCSI scanners, it checks the default generic SCSI device files (e.g., /dev/sg0) and /dev/scanner. The test is done by sending a SCSI
inquiry command and looking for a device type of "scanner" or "processor" (some old HP scanners seem to send "processor"). So sane-find-
scanner will find any SCSI scanner connected to those default device files even if it isn't supported by any SANE backend.
For USB scanners, first the USB kernel scanner device files (e.g. /dev/usb/scanner0), /dev/usb/scanner, and /dev/usbscanner are tested. The
files are opened and the vendor and device ids are determined if the operating system supports this feature. Currently USB scanners are
only found this way if they are supported by the Linux scanner module or the FreeBSD or OpenBSD uscanner driver. After that test, sane-
find-scanner tries to scan for USB devices found by the USB library libusb (if available). There is no special USB class for scanners, so
the heuristics used to distinguish scanners from other USB devices is not perfect. sane-find-scanner will even find USB scanners, that are
not supported by any SANE backend.
sane-find-scanner won't find parallel port scanners, or scanners connected to proprietary ports.
OPTIONS -h, -? Prints a short usage message.
-v Verbose output. If used once, sane-find-scanner shows every device name and the test result. If used twice, SCSI inquiry informa-
tion and the USB device descriptors are also printed.
-q Be quiet. Print only the devices, no comments.
-f Force opening all explicitely given devices as SCSI and USB devices. That's useful if sane-find-scanner is wrong in determing the
device type.
devname Test device file "devname". No other devices are checked if devname is given.
EXAMPLE
sane-find-scanner -v
Check all SCSI and USB devices for available scanners and print a line for every device file.
sane-find-scanner /dev/scanner
Look for a (SCSI) scanner only at /dev/scanner and print the result.
SEE ALSO sane(7), sane-scsi(5), sane-usb(5), scanimage(1), xscanimage(1), xsane(1), sane-"backendname"(5)
AUTHOR
Oliver Rauch, Henning Meier-Geinitz and others
SUPPORTED PLATFORMS
USB support is limited to Linux (kernel, libusb), FreeBSD (kernel, libusb), NetBSD (libusb), OpenBSD (kernel, libusb). Detecting the vendor
and device ids only works with Linux or libusb.
SCSI support is available on Irix, EMX, Linux, Next, AIX, Solaris, FreeBSD, NetBSD, OpenBSD, and HP-UX.
BUGS
No support for parallel port scanners yet.
15 Sep 2002 sane-find-scanner(1)