Hi,
I am uising Suse linux on my system and i tried :
man ethtool and i got the manual for ethtool but when i tried to use the command as:
ethtool -a eth0
it says Command not found.
also, i tried rpm -qa|grep ethtool i got:
ethtool-3-15.2 so,it means my system has ethtool server or... (4 Replies)
Hi,
I'm using ethtool to change network settings:
Just for the experiment, i want to change speed to 10, instead of 100,
I type:
ethtool -s eth0 speed 10 duplex full autoneg off
and to view settings i type:
ethtool eth0, and get this:
Settings for eth0:
Supported ports:
... (4 Replies)
Hello, I've got a FreeBSD 6 server running on my network that I used as a file server for my main computer. However I've really become frustrated with the slow up/down speeds I'm getting, about 100KB/s, which is about as bad as if I was using a "real" server. My setup is as follows:
ISP
|... (4 Replies)
Hi,
We have a website running on a local centos 5.4 surfer, static IP.
The domain.com uses no-ip.com to take care of the DNS, it forwards all to my server.
My router receives the port 80 call, routes it to my server and the world can see domain.com perfectly fine.
However, we cannot see... (3 Replies)
Hi,
I have a script that, basically, has two input files of this type:
file1
key1=value1_1_1
key2=value1_2_1
key4=value1_4_1
...
file2
key2=value2_2_1
key2=value2_2_2
key3=value2_3_1
key4=value2_4_1
...
My files are 10k lines big each (approx).
The keys are strings that don't... (7 Replies)
Hi, there is an incompatibility between my NIC and my Western Digital Powerline adapters which appears to cause autonegotiation to fail intermittently, most often following a reboot. Running the following Ethtool script will establish a connection immediately:
#!/bin/sh
# chkconfig: 345 85... (12 Replies)
Hello all. I have VSFTP up and ruining on ubuntu 10.04. It works great inside LAN, however when it comes to using it outside i have some problems. If i try to connect from filezila i get the listing and if i try to download it shows it will take forever to receive a file which is larger then 1mb,... (2 Replies)
Hi All,
I am trying to find my NIC card speed in centos 5. But i am unable to get the info using ethtool command.
# ethtool eth0
Settings for eth0:
Link detected: yes
and even tried to look for the file # cd /sys/class/net/eth0/speed files which is also not available.... (8 Replies)
Discussion started by: sravani25
8 Replies
LEARN ABOUT NETBSD
wm
WM(4) BSD Kernel Interfaces Manual WM(4)NAME
wm -- Intel i8254x Gigabit Ethernet driver
SYNOPSIS
wm* at pci? dev ? function ?
Configuration of PHYs may also be necessary. See mii(4).
DESCRIPTION
The wm device driver supports Gigabit Ethernet interfaces based on the Intel i8254x family of Gigabit Ethernet chips. The interfaces sup-
ported by the wm driver include:
o Intel i82542 1000BASE-X Ethernet
o Intel i82543GC 1000BASE-X Ethernet
o Intel i82543GC 1000BASE-T Ethernet
o Intel i82544EI 1000BASE-T Ethernet
o Intel i82544EI 1000BASE-X Ethernet
o Intel i82544GC 1000BASE-T Ethernet
o Intel i82544GC (LOM) 1000BASE-T Ethernet
o Intel i82540EM 1000BASE-T Ethernet
o Intel i82540EM (LOM) 1000BASE-T Ethernet
o Intel i82540EP 1000BASE-T Ethernet
o Intel i82541EI 1000BASE-T Ethernet
o Intel i82541EI (Mobile) 1000BASE-T Ethernet
o Intel i82541ER 1000BASE-T Ethernet
o Intel i82541GI 1000BASE-T Ethernet
o Intel i82541PI 1000BASE-T Ethernet
o Intel i82545EM 1000BASE-T Ethernet
o Intel i82545EM 1000BASE-X Ethernet
o Intel i82545GB 1000BASE-T Ethernet
o Intel i82545GB 1000BASE-X Ethernet
o Intel i82545GM 1000BASE-T Ethernet
o Intel i82546EB 1000BASE-T Ethernet (dual-port)
o Intel i82546EB 1000BASE-X Ethernet (dual-port)
o Intel i82546GB 1000BASE-T Ethernet (dual-port)
o Intel i82546GB 1000BASE-X Ethernet (dual-port)
o Intel i82547EI 1000BASE-T Ethernet (CSA)
o Intel i82547GI 1000BASE-T Ethernet (CSA)
o Intel i82571 1000BASE-T Ethernet (dual-port)
o Intel i82572 1000BASE-T Ethernet
o Intel i82573 1000BASE-T Ethernet
o Intel i82575 1000BASE-T Ethernet
o Intel i82576 Ethernet (Copper, Fiber)
o Intel i80003 Ethernet (Copper, Fiber)
o Intel i82801H (ICH8 LAN) 1000BASE-T Ethernet
o Intel i82801I (ICH9 LAN) 1000BASE-T Ethernet
o Intel i82801J (ICH10 LAN) 1000BASE-T Ethernet
o Intel 82578 with Intel 5 series chipset (PCH)
o Intel 82579 with Intel 6 or 7 series chipset (PCH2)
o Intel 82580 Ethernet (Copper, Fiber)
o Intel 82583 1000BASE-T Ethernet
o Intel I350 Ethernet (Copper, Fiber)
In addition to Intel's own ``PRO/1000'' line of Gigabit Ethernet interfaces, these chips also appear on some server systems, processor evalu-
ation boards, and in embedded systems.
The i8254x supports IPv4/TCP/UDP checksumming and TCP segmentation in hardware. The wm driver supports these features of the chip. See
ifconfig(8) for information on how to enable this feature.
SEE ALSO arp(4), ifmedia(4), mii(4), netintro(4), pci(4), ifconfig(8)HISTORY
The wm driver first appeared in NetBSD 1.6.
AUTHORS
The wm driver was written by Jason R. Thorpe <thorpej@wasabisystems.com>.
BUGS
The Intel i82545GM and i82546GB controllers with internal SERDES are not currently supported.
BSD June 20, 2012 BSD