Login or Register to Ask a Question and Join Our Community

Sponsored Content
Full Discussion: SCO OpenServer 5 Will Not Boot
Top Forums UNIX for Beginners Questions & Answers SCO OpenServer 5 Will Not Boot Post 303026564 by spock9458 on Thursday 29th of November 2018 01:47:09 PM
Old 11-29-2018
I guess it's good that I have retained the habit of never throwing anything away. I found an old 1U rack server with a SuperMicro mb model X7XBI, that has a 775 socket. I first tried installing my "new" hard drive with the recent O/S installation, and after making a few changes in the BIOS for the SATA config, there were no problems booting up!! I tried to do some changes with the mouse configuration because I still have no mouse working in the GI, but I really don't care about that. So then I installed my old hard drive with the working legacy app and everything booted up normally. Now it appears that the only hangup I have is with the NIC, and I want to see if there is any way to fix that. I have a PCI-Express slot in the server, but I did not spend the time to see if I have a separate NIC that will fit. The specs for the old mb say that I was using an Intel PRO100 (Intel 82550PM) LAN controller, and that is what still shows up in "scoadmin network" settings. The SuperMicro specs say that on this mb the LAN is Intel 82573V or 82573L. Is there going to be any way to add this new LAN card to my settings and get it to work? If someone can walk me through the steps, I would really appreciate it! I am excited to have come this far with equipment I already had.
 

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

Help For SCO OpenServer

I've just installed Unix SCO OpenServer System v in an Intel PC and Everithing ok, except just one thing, in the begining of the installation the wizard asked me about the mouse , i have a generic 3 buttons mouse and i took a logitech and did not work i need to change the mouse configuration, ... (2 Replies)
Discussion started by: jimmyvaldes
2 Replies

2. UNIX for Dummies Questions & Answers

sco openserver 5.5

hello! when i try to make my system dual boot with both win98 & sco open server 5.5 it doesn't work at all.neither win98 take start nor sco open server boots.what should i do ? kindly help me thanks (1 Reply)
Discussion started by: buntty
1 Replies

3. UNIX for Advanced & Expert Users

SCO 5.0.2 openserver

I am doing some work for a customer that is running SCO 5.0.2 openserver and they have lost their cd. Is there anyplace I can download it? I have a replacement being shipped but it will not be here for two days and they are down. Any ideals? (3 Replies)
Discussion started by: SCOoT
3 Replies

4. UNIX for Dummies Questions & Answers

boot failure SCO 5.0.6 OpenServer

hello guys. I just installed SCO 5.0.6 OpenServer it went all the way to the end of the installation and the first boot try it gave me this message. not a directory boot not found cannot open stage 1 boot failure: error loading hd (40)/boot (2 Replies)
Discussion started by: josramon
2 Replies

5. SCO

Ethereal for SCO OpenServer 5.0.7???

Which version of Ethereal can I use for SCO OpenServer 5.0.7??? (0 Replies)
Discussion started by: bean2
0 Replies

6. UNIX for Dummies Questions & Answers

SCO Openserver 6.0

Hi there guys. I just got this new SCO version and i'm having some problem printing from shell, This is what i'm typing at the # sign : lp -dHP /etc/hosts and it prints no problem but when i use any other user at the $ sign it gives me this error. /dev/fd/7: /usr/lib/lp/sysv/7: not found. ... (1 Reply)
Discussion started by: josramon
1 Replies

7. UNIX for Dummies Questions & Answers

SCO Openserver 6.0

Hi guys, I just got this new 6.0 version and i'm trying to setup a remote office to telnet to this server running sco 6.0, in previous version all i have to do is add this file under /etc/rc2.d call S99route and put the gate in that file and that was it, for some reason in 6.0 it does not... (1 Reply)
Discussion started by: josramon
1 Replies

8. SCO

sco openserver 5.0.7

Dear members when i installed dual processor patch in openserver 5.0.7 in hp ML370 G4 server it hangs in sco at G_hd_config. i tried MP4, EFS 5.64,5.70A but not solved the problem.. (0 Replies)
Discussion started by: M_farooqui
0 Replies

9. SCO

sco openserver 5.0.0 boot / root disk

Hi, I have an openserver 5.0.0 machine in the office. The sysad of that machine left years ago without leaving the password to anyone. I was wondering if someone has a copy of the boot / root diskettes (rescue) for this version? Or perhaps if anyone knows a download link / location in the... (0 Replies)
Discussion started by: marcpascual
0 Replies

10. SCO

I need SCO Openserver 4.2!!!!

I need SCO Openserver 4.2. Please, give me distributive of that version SCO:eek: (0 Replies)
Discussion started by: caine
0 Replies

LEARN ABOUT NETBSD

wm

WM(4)							   BSD Kernel Interfaces Manual 						     WM(4)

NAME

     wm -- Intel i8254x Gigabit Ethernet driver

SYNOPSIS

     wm* at pci? dev ? function ?

     Configuration of PHYs may also be necessary.  See mii(4).

DESCRIPTION

     The wm device driver supports Gigabit Ethernet interfaces based on the Intel i8254x family of Gigabit Ethernet chips.  The interfaces sup-
     ported by the wm driver include:

     o	 Intel i82542 1000BASE-X Ethernet

     o	 Intel i82543GC 1000BASE-X Ethernet

     o	 Intel i82543GC 1000BASE-T Ethernet

     o	 Intel i82544EI 1000BASE-T Ethernet

     o	 Intel i82544EI 1000BASE-X Ethernet

     o	 Intel i82544GC 1000BASE-T Ethernet

     o	 Intel i82544GC (LOM) 1000BASE-T Ethernet

     o	 Intel i82540EM 1000BASE-T Ethernet

     o	 Intel i82540EM (LOM) 1000BASE-T Ethernet

     o	 Intel i82540EP 1000BASE-T Ethernet

     o	 Intel i82541EI 1000BASE-T Ethernet

     o	 Intel i82541EI (Mobile) 1000BASE-T Ethernet

     o	 Intel i82541ER 1000BASE-T Ethernet

     o	 Intel i82541GI 1000BASE-T Ethernet

     o	 Intel i82541PI 1000BASE-T Ethernet

     o	 Intel i82545EM 1000BASE-T Ethernet

     o	 Intel i82545EM 1000BASE-X Ethernet

     o	 Intel i82545GB 1000BASE-T Ethernet

     o	 Intel i82545GB 1000BASE-X Ethernet

     o	 Intel i82545GM 1000BASE-T Ethernet

     o	 Intel i82546EB 1000BASE-T Ethernet (dual-port)

     o	 Intel i82546EB 1000BASE-X Ethernet (dual-port)

     o	 Intel i82546GB 1000BASE-T Ethernet (dual-port)

     o	 Intel i82546GB 1000BASE-X Ethernet (dual-port)

     o	 Intel i82547EI 1000BASE-T Ethernet (CSA)

     o	 Intel i82547GI 1000BASE-T Ethernet (CSA)

     o	 Intel i82571 1000BASE-T Ethernet (dual-port)

     o	 Intel i82572 1000BASE-T Ethernet

     o	 Intel i82573 1000BASE-T Ethernet

     o	 Intel i82575 1000BASE-T Ethernet

     o	 Intel i82576 Ethernet (Copper, Fiber)

     o	 Intel i80003 Ethernet (Copper, Fiber)

     o	 Intel i82801H (ICH8 LAN) 1000BASE-T Ethernet

     o	 Intel i82801I (ICH9 LAN) 1000BASE-T Ethernet

     o	 Intel i82801J (ICH10 LAN) 1000BASE-T Ethernet

     o	 Intel 82578 with Intel 5 series chipset (PCH)

     o	 Intel 82579 with Intel 6 or 7 series chipset (PCH2)

     o	 Intel 82580 Ethernet (Copper, Fiber)

     o	 Intel 82583 1000BASE-T Ethernet

     o	 Intel I350 Ethernet (Copper, Fiber)

     In addition to Intel's own ``PRO/1000'' line of Gigabit Ethernet interfaces, these chips also appear on some server systems, processor evalu-
     ation boards, and in embedded systems.

     The i8254x supports IPv4/TCP/UDP checksumming and TCP segmentation in hardware.  The wm driver supports these features of the chip.  See
     ifconfig(8) for information on how to enable this feature.

SEE ALSO

     arp(4), ifmedia(4), mii(4), netintro(4), pci(4), ifconfig(8)

HISTORY

     The wm driver first appeared in NetBSD 1.6.

AUTHORS

     The wm driver was written by Jason R. Thorpe <thorpej@wasabisystems.com>.

BUGS

     The Intel i82545GM and i82546GB controllers with internal SERDES are not currently supported.

BSD
								   June 20, 2012							       BSD
All times are GMT -4. The time now is 05:51 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy