Sponsored Content
Full Discussion: M5000 fails to boot
Operating Systems Solaris M5000 fails to boot Post 303008303 by rbatte1 on Thursday 30th of November 2017 04:04:08 AM
Old 11-30-2017
Do you have some install media that you can use to bring up an OS just in memory?

Something like:-
Code:
ok> boot cdrom -s

If you can get that running, then you can try to look at the devices you have available. Alternately, you might try something like:-
Code:
ok> probe-scsi

It has been a long time since I had a Sun Sparc to work with, so things may well have changed. You can get some basic help at the ok> prompt. This looks like a hardware issue, or perhaps it is trying to pick up SAN provided disk that has been de-configured.

Can you tell us a bit more about what you have and why you don't have a password for root. Some people choose to have is randomly set regularly, but you should include a secure place to store it should the need (like this) arise. We might be able to get you in if you have console access, install media and the correct disks available.



Regards,
Robin
This User Gave Thanks to rbatte1 For This Post:
 

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

boot fails after power faliure

Hi, i was installing solaris 8 on sunfire v250 and the power fails :mad: , now it does not boot from cd rom and get the next msg: ð Sun Fire V120 (UltraSPARC-IIe 648MHz), No Keyboard OpenBoot 4.0, 512 MB memory installed, Serial #56338483. Ethernet address 0:3:ba:5b:a8:33, Host ID: 835ba833. ... (1 Reply)
Discussion started by: agustincm
1 Replies

2. HP-UX

Auto-Port Aggregation startup fails on boot

I have a machine running HP-UX 11.23 (PARISC) and APA startup fails on boot. This is found in /etc/rc.log: Configure Auto-Port Aggregation(LAN Monitor) interfaces Output from "/sbin/rc2.d/S343hplm start": ---------------------------- get_start_dlpi_version: failed, errno is 22 ERROR: ... (1 Reply)
Discussion started by: kknigga
1 Replies

3. Solaris

M5000 Question

Hi i 've a M5000 running 2 domains in my Lab with following hardconf SPARC Enterprise M5000; Memory_Size:128 GB; +-----------------------------------+------------+ | FRU | Quantity | +-----------------------------------+------------+ | MBU_B... (3 Replies)
Discussion started by: fugitive
3 Replies

4. UNIX for Advanced & Expert Users

PXE diskless boot fails

Hi, I am trying to setup a server for a diskless boot of a computer class (with ubuntu) I followed the guidelines in https://help.ubuntu.com/community/DisklessUbuntuHowto I have two computers: one is the server I installed and the other is my macbook on which I run a virtual machine... (8 Replies)
Discussion started by: yotamhc
8 Replies

5. Solaris

M5000 boot net- install failed

Good evening all,I'm new to your site, so please bear any infringements or transgressions on my part.I'm new to the whole Solaris boot install over the net scenario, but here's where I'm stuck:I have an M5000 with 2 domains (running unimode). Domain 0 is configured and running Solaris 10. Domain 1... (9 Replies)
Discussion started by: RandomSun
9 Replies

6. Solaris

T5220 fails to boot

One of our T5220 servers fail to boot due to following error: ERROR: The following devices are disabled: XAUI1 XAUI0 I can't see any disabled components in SP console, any idea what is the problem? (1 Reply)
Discussion started by: belalr
1 Replies

7. Solaris

T2000 Sparc server fails boot

I have a T2000 enterprise SPARC server that's no longer on contract with Oracle. It's on old firmware (6.3.x). After a power-down this weekend, it won't boot normally. Boot snapshot at the bottom of the post. It can boot to cdrom, and it'll boot to failsafe mode, but it won't do a regular... (9 Replies)
Discussion started by: val riverwalk
9 Replies

8. IP Networking

M5000 Xscf

I took over an M5000 and have a jumper server with a nic to connect to the console IP of an M5000. access via ssh user@ip. it was working fine, another person can connect remotely on the subnet, but when I ssh,it just hangs and then times out. so my question is, any ideas of what I might... (4 Replies)
Discussion started by: rrodgers
4 Replies

9. UNIX for Beginners Questions & Answers

Lucreate Fails to Create Boot Environment;

My OS solarius 5.10 Generic_147148-2 i86 Error: please review new boots environments using options 1. Solution - show me the commands Partition is full, try to remove some unneeded files, then try to compress some other unneeded files. man command creates a temp file under... (0 Replies)
Discussion started by: zbest1966
0 Replies

10. Solaris

Boot Error - NIS services fails with Status 96

My system suddenly crash and when it rebooted there was an error: /dev/rdsk/c1t0d0s3 is logging svc.startd: svc:/network/nis/client:default: Method "/method/yp" failed with status 96. The system completes booting however when I log in a user account / directory is not longer... (1 Reply)
Discussion started by: NeedSolarisHelp
1 Replies
mkcd(1M)						  System Administration Commands						  mkcd(1M)

NAME
mkcd - create bootable Solaris ISO image SYNOPSIS
/usr/bin/mkcd -v [-l label] media-root iso DESCRIPTION
The mkcd utility takes media-root (the root of an on-disk Solaris install media) as input and creates a bootable Solaris ISO image in the file iso, using mkisofs(8). The file can then be burned onto a CD/DVD with utilities such as cdrw(1) or cdrecord(1). (Neither mkisofs(8) nor cdrecord(1) are SunOS man pages.) Caution - The directory tree media-root must contain the file boot/grub/stage2_eltorito, which will be written to the media boot sectors. This file will be modified with some boot information, thus it must be writable. If necessary, first save a copy prior to running this utility. OPTIONS
The following options are supported: -l label Sets label as the label/volume name of the ISO image. -v Verbose. Multiple -v options increase verbosity. OPERANDS
The following operands are supported: media-root Top-level directory of an on-disk Solaris install media. iso Name of the output file which will contain the resulting ISO image. EXAMPLES
Example 1 Creating an ISO Image and Burning a CD/DVD The following commands create an ISO image from the content of s10u1 and burn the image to a CD/DVD. # /usr/bin/mkcd s10u1 s10u1.iso # /usr/bin/cdrw -i s10u1.iso ATTRIBUTES
See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Availability |SUNWcsu | +-----------------------------+-----------------------------+ |Interface Stability |Committed | +-----------------------------+-----------------------------+ SEE ALSO
cdrw(1), attributes(5) mkisofs(8), (/usr/share/man/man8/mkisofs.8), in the SUNWfsman package (not a SunOS man page) SunOS 5.11 25 Jul 2008 mkcd(1M)
All times are GMT -4. The time now is 02:33 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy