How to view Cisco WS-C2960S-24TD-L OutPut/Configuration? Post: 302914094

5 More Discussions You Might Find Interesting

1. SCO

View Hardware Configuration

View Hardware Configuration is not an accessible option on the drop down list on the Open Server SCO Relase 5.05 Why would this be and how can I work around to get into it? Any suggestions would be appreciated! Thanks

2. Shell Programming and Scripting

join files cisco command output

We have two files with results of two commands of cisco: one file; showintstatus, have the following format: Gi2/6 servidorlij connected 176 full 1000 10/100/1000BaseTsecond file; showmacaddrestable, have the following format: * 162 0021.9b8d.073e dynamic Yes 0 ...

3. IP Networking

cisco switch + firewall configuration upgrade

Hi experts, I need to cope configuration from one switch/firewall to another switch/firewall. I have copied running configs. The question is do I have to clear the existing configuration on the dest. devices Or can I copy it(replace) directly without clearing previous config ? If...

4. IP Networking

How to show Cisco Router Running Configuration in Third Party Application

Hey everyone, I have a few question. 1. Is it possible to display cisco 'show run' output command to the application ?? 2. And is there any ways to log in to the router instead of using telnet from telnet application??? Thanks in advance

5. IP Networking

WS-C2960S-24PD-L vs WS-C2960S-24PS-L

Does anyone know the noticable different between Catalyst 2960S 24 GigE PoE 370W 2 x 10G SFP+ LAN Base and Catalyst 2960S 24 GigE PoE 370W 4 x SFP LAN Base ?

LEARN ABOUT NETBSD

gsip

GSIP(4) 						   BSD Kernel Interfaces Manual 						   GSIP(4)

NAME

     gsip -- National Semiconductor DP83820 Gigabit Ethernet driver

SYNOPSIS

     gsip* at pci? dev ? function ?

     Configuration of PHYs may also be necessary.  See mii(4).

DESCRIPTION

     The gsip device driver supports Gigabit Ethernet interfaces based on the National Semiconductor DP83820 Gigabit Ethernet chips.

     The National Semiconductor DP83820 is found on NetGear GA-622, Asante FriendlyNet GigaNIX, D-Link DGE-500T, SMC 9452TX and 9462TX, Accton
     EN1407-T, Planex GN-1000TE, ARK SOHO GA2000T and GA2500T, and other low-cost Gigabit Ethernet cards.  It uses an external PHY or an external
     10-bit interface.

     The DP83820 supports VLAN tag insertion/removal in hardware.  The gsip driver supports this feature of the chip.

     The DP83820 supports IPv4/TCP/UDP checksumming in hardware.  The gsip driver supports this feature of the chip.  See ifconfig(8) for informa-
     tion on how to enable this feature.

     The DP83820 chip is a close relative of the DP83815 10/100 Ethernet chip, which is supported by the sip(4) driver, hence the gsip name.

SEE ALSO

     arp(4), ifmedia(4), mii(4), netintro(4), pci(4), vlan(4), ifconfig(8)

HISTORY

     The gsip driver first appeared in NetBSD 1.6.

AUTHORS

     The gsip driver was written by Jason R. Thorpe <thorpej@NetBSD.org>.

BUGS

     The gsip driver does not support the 10-bit interface, which is required in order to support fiber-optic media.

BSD
								   June 2, 2001 							       BSD