I have 1 PCI-X Dual Channel Ultra320 SCSI Adapter card for my p570 server. I would like to split the 2 channels for the usage of 2 tape drives in different LPARs. Is that possible?
For example, I have 2 LPARs running in p570 server, LPAR-A configured the Ultra320 card as pci7 in slot... (11 Replies)
How do or what do I need to add PCI / PCIe (PCI Express) parallel ports add-on adapters to OpenServer 6.0.0? OpenServer 5 could see PCI slots but OpenServer 6.0.0 (Original CD or the Re-cut one) required a maintenance pack to be installed? Is this right and how do I check to see if these work? (2 Replies)
I'm floundering here trying to locate a PCI-E 1x HBA that will support an external tape drive in SCO Openserver 6. I was unable to find anything that would work in the compatible hardware list and a call to Adaptec confirmed that PCI-X would've been a better option for the risers in the Dell 2950... (1 Reply)
why is this error message keeps coming once every month. Is this a serious problem?
In the /var/adm/messages file
Nov 26 06:10:42 ids-ldap07 px: WARNING: PCI Express error report:
Nov 26 06:10:42 ids-ldap07 device_path = /pci@1e,600000/pci@0/pci@8, msg_code = 0x30, req_id = 0x340, Nov 26... (7 Replies)
Hello!
I have some X86 desktop computer with G45 embedded dual-head video.
Two monitors can be configured, but with "small" problem: the summ of dimensions in any direction (vert or horis) can't exceed 1680 pix- max sizeof virtual screen area.
Attempts to edit "videoram" parameter in xorg.conf... (0 Replies)
Hi,
I want to change from vscsi to npiv. Is it possible to use both on the same adapter, so we can change the systems one by one, or must we place a second FC adapter in the VIO servers?
Thanks,
Ronald (2 Replies)
Hi,
I am using Aitech sata device sil3132, on powerpc mpc8641. The device is pci express msi compatible. I had enabled msi in device tree for powerpc but still its giving me Cannot translate IRQ index 0 and so on messages.
fsl-msi f7f41600.msi: fsl_msi_setup_hwirq: Cannot translate IRQ index 0... (0 Replies)
I am trying to reload a RP4440 with 2x300gb disks and dual Port Network card, with HPUX 11.11 Sept 2003. When the os boots and and gets to the main menu to install HPUX or run recovery, it cannot find the disks or NIC.
At the OS prompt (after loading files), ioscan shows the Class ba, and shows... (0 Replies)
Discussion started by: mrmurdock
0 Replies
LEARN ABOUT NETBSD
siisata
SIISATA(4) BSD Kernel Interfaces Manual SIISATA(4)NAME
siisata -- Silicon Image SATA-II controllers driver
SYNOPSIS
siisata* at pci? dev ? function ?
siisata* at cardbus? function ?
DESCRIPTION
The siisata driver supports the Silicon Image SteelVine family of SATA-II controllers, interfacing the hardware with the ata(4) and atapi(4)
subsystems.
The following controllers are supported by the siisata driver:
Silicon Image SiI3124 4-port PCI/PCI-X
Silicon Image SiI3132 2-port PCI-Express x1
Silicon Image SiI3531 1-port PCI-Express x1
SEE ALSO ata(4), atapi(4), cardbus(4), pci(4), wd(4)HISTORY
The siisata driver first appeared in NetBSD 5.0.
AUTHORS
The siisata driver was written by Jonathan A. Kollasch <jakllsch@kollasch.net>.
BUGS
SATA Native Command Queuing is not yet supported.
Device hot swapping is not yet supported.
Silicon Image's Software RAID is not yet supported by the
ataraid(4) driver. raid(4) can be used instead.
BSD July 19, 2009 BSD