I am having a sun server. The primary network interface is having name "sun1" and IP address "192.168.2.10". Now when I add second network interface with different IP address "10.1.1.100" and same hostname, it doesn't work.
What I want to know is that should the second interface having different hostname like IP address or can any one tell me how to configure second network interface with different IP address...
Thanks in advance,
Deepak
Here is the output of /etc/inet/hosts, /etc/inet/ipnodes, /etc/nodename, /etc/hostname.hme0 and /etc/hostname.hme1 files:
Thanks,
Deepak
Last edited by DukeNuke2; 12-05-2009 at 07:04 AM..
Hi !
Does anyone know how can i get information about my network interface ... if it works in half or full duplex mode !!
Thx in adivance !
Witt (4 Replies)
I recently brought up a second network interface adapter in my Solaris 8 box. I configured the /etc/hostname.interface (hostname.ce1 in this case) with the hostname of the new adapter. I then added that hostname to the /etc/hosts file. Problem is when I reboot the ce1 interface is plumbed, but... (1 Reply)
Hello everybody,
How can link network interface to the output of lspci -vv. Basicly i need to know who is the manufacturer of a specific interface, for example eth0 {Is it an Intel, or Broadcome, or something else}. Is there a way to find that out?
Thanx (5 Replies)
Hi.. Every one,
I have servers installed with solaris 10.We have configured our servers for IPMP and we have respective entries in /etc/hostname.<interface> for every physical interface.
for example one of the file contains :
# more /etc/hostname.ce6
super-ce6 netmask + broadcast + group... (3 Replies)
i need to configure a zone to use different interface (bge2) than global and have connected to completely different network switch & to use its own defaultrouter and hosts file .. is it possible ..if so ..how ?
Thanks (9 Replies)
Hi,
I'm a italian student. For my thesis I develop a gateway with protocol 6lowpan.
For that I must access to network interface to develope my personal stack based on standard 802.15.4.
Can you help me? I need an explanation for that. (0 Replies)
Hello,
Please, how can i create a network interface with a routable IP address on linux (ubuntu) ?
AND
How can i desactivate an interface?
Thank you so much for help. (1 Reply)
I've one Netra 240
After changing main board and system configuration card reader, Network is not accessible any more, Network interfaces are always UP and Running even when there is no cable connected to Network interfaces.
I tried to restart and plumb/unplumb with no luck.
ifconfig -a... (7 Replies)
I have a RHEL 5 system with a bonded interface configure using only one network port (eth0). So I have config file for ifcfg-bond0 and ifcfg-eth. I'd like to configure eth5 to be the second SLAVE in the bond. My question is, after I modify ifcfg-eth5, can I add eth5 to the bond0 interface without... (1 Reply)
Discussion started by: westmoreland
1 Replies
LEARN ABOUT DEBIAN
bt-network
bt-network(1) bluez-tools bt-network(1)NAME
bt-network - a bluetooth network manager
SYNOPSIS
bt-network [OPTION...]
Help Options:
-h, --help
Application Options:
-a, --adapter=<name|mac>
-c, --connect <name|mac> <uuid>
-s, --server <gn|panu|nap> <brige>
DESCRIPTION
This utility is used to manage network services (client/server). All servers will be automatically unregistered when the application
terminates.
OPTIONS -h, --help
Show help
-a, --adapter <name|mac>
Specify adapter to use by his Name or MAC address
(if this option does not defined - default adapter used)
-c, --connect <name|mac> <uuid>
Connect to the network device and return the network interface
name, uuid can be either one of "gn", "panu" or "nap"
-s, --server <gn|panu|nap> <brige>
Register server for the provided UUID, every new connection to
this server will be added the bridge interface
AUTHOR
Alexander Orlenko <zxteam@gmail.com>.
SEE ALSO bt-adapter(1)bt-agent(1)bt-audio(1)bt-device(1)bt-input(1)bt-monitor(1)bt-serial(1)
2010-11-22 bt-network(1)