ILOM and Solaris installation Post: 302214820

9 More Discussions You Might Find Interesting

1. Solaris

installation of Solaris: installation bypasses network config.

hello solaris friends, I've tried installing Sun Solaris 10.0, but everytime it seems to bypass the network config. screen that looks similar to this...here's the url: http://www.hup.hu/old/images/hup/Solaris/Sol10beta7/9.png I'm able to install it all the way through but I get no...

2. Solaris

Solaris Installation

Hi, I want to know as we can install Sun Solaris through hyperterminal,Wheather any other software is coming through which we can install sun solaris

3. UNIX for Advanced & Expert Users

ILOM Alert messages to Solaris OS - X4250 (Intel based NO ALOM)

Hi, I have a problem when running some tests. I unplug one power cable from the server. No message is sent to/var/adm/messages On the ILOM GUI, it shows power state deasserted. Anyone knows how to forward this message to the OS, perhaps using the alert management settings? IPMI,snmp?...

4. Solaris

Sun X4540 Ilom - Solaris 10

Hello Admins, I am trying to access the solaris 10 host using the ilo. When I do start /SP/console, it just hangs, it doesn't give me any login prompt... I tried reset /SYS and also did reset /SP...but no luck... We have Sun X4540.... Any help appreciated..Thanks

5. Solaris

Redirecting console output to ILOM during installation

Hi, I need to install solaris remotely via the ILOM port on a x4170 box, and I have downloaded the Solaris 11 for x86 - text install image and burned it on a DVD. When I boot the box, it's showing the boot_archive loading percentage on the SP console, but when it's done and start the interactive...

6. Solaris

Solaris 10 flash installation - fatal error. Solaris installation program exited.

Not very helpful to say the least. Seems to read the flar file and go through the upgrade and then come up with this error. Any ideas?

7. Solaris

Installation of Solaris 10 1/13

Hi, I am doing a fresh installation of Solaris 10 1/13 on an IBM x3550 M3 server (x86). When I begin the installation it shows me failed to mount zfs, I was advised by oracle to ignore that. After the installation has finished and I reboot,I get a host of random errors after that it displays...

8. Solaris

Netra T4-1 How to Find ILOM IP from Solaris OS

Hello, We have Netra T4-1 server with Solaris 10 OS. I have remote access to OS. But i don't know the ILOM IP of T4-1. That's why i cannot connect to it. Is there a Solaris command to display ILOM IP?

9. Solaris

Solaris 11.3 installation FS

Am new on Solaris and I need customized FS like below am using text base installation iso and not getting any option to modify FS during installation . OS: Solaris 11.3 x86 Please assist if am doing anything wrong here . / -> 5GB /opt -> 100GB /var ...

LEARN ABOUT NETBSD

urlphy

URL(4)							   BSD Kernel Interfaces Manual 						    URL(4)

NAME

     url -- Realtek RTL8150L USB Ethernet driver

SYNOPSIS

     url*    at uhub?
     urlphy* at mii?

DESCRIPTION

     The url driver provides support for USB Ethernet adapters based on the Realtek RTL8150L USB-ether bridge chip.

     The url driver supports the following adapters:

	   CompUSA USBKR100
	   GreenHouse GH-USB100B
	   Melco Inc. LUA-KTX
	   Sitecom LN013

     For more information on configuring this device, see ifconfig(8).

DIAGNOSTICS

     url%d: watchdog timeout  A packet was queued for transmission and a transmit command was issued, however the device failed to acknowledge the
     transmission before a timeout expired.

     url%d: no memory for rx list  The driver failed to allocate an mbuf for the receiver ring.

SEE ALSO

     arp(4), mii(4), netintro(4), usb(4), ifconfig(8)

HISTORY

     The url device driver first appeared in NetBSD 1.6.

AUTHORS

     The url driver was written by Shingo WATANABE <nabe@nabechan.org>.

BSD
								September 18, 2006							       BSD