Hardware RAID Post: 302157484

9 More Discussions You Might Find Interesting

1. Solaris

how to hardware RAID 1 on T5120

Hi, I have t5120 sparc and I have 2 146 G drives in the system. I will be installing solaris 10 and also want the system mirrored using Hardware RAID "1" The System did come preinstalled as it comes from sun. I did not do much on it. I booted system using boot cdrom -s gave format...

2. Solaris

T2000 Hardware RAID

Hi, I have a root with hardware RAID on c0t0d0 and c0t2d0. I would like to set the boot device sequence in OBP for both hdds. I have checked in ls -l /dev/rdsk/ for the path of c0t2d0 but it does not exist. Can anyone shed some lights on this? AVAILABLE DISK SELECTIONS: 0....

3. UNIX for Dummies Questions & Answers

RAID software vs hardware RAID

Hi Can someone tell me what are the differences between software and hardware raid ? thx for help.

4. Solaris

Hardware Raid - LiveUpgrade

Hi, I have a question. Do LiveUpgrade supports hardware raid? How to choose the configuration of the system disk for Solaris 10 SPARC? 1st Hardware RAID-1 and UFS 2nd Hardware RAID-1 and ZFS 3rd SVM - UFS and RAID1 4th Software RAID-1 and ZFS I care about this in the future to take...

5. Hardware

Sun T3-1 hardware RAID

Hi all I've just received my T3-1. It has 8 disks and I would like to configure RAID1 on the disks. The Sun documentation states that you can either use the OpenBoot PROMP utility called Fcode or you can use software via the Solaris OS. The documentation doesn't make it clear if: 1. The...

6. HP-UX

Hardware RAID in HP Unix rp3440

Hi Gurus, Can anyone tell me the Hardware RAID configuration in HP Unix rp3440 model server containing HP UX B.11.11 OS version. Thanks in Advance. BR, Prasanth

7. Solaris

Software RAID on top of Hardware RAID

Server Model: T5120 with 146G x4 disks. OS: Solaris 10 - installed on c1t0d0. Plan to use software raid (veritas volume mgr) on c1t2d0 disk. After format and label the disk, still not able to detect using vxdiskadm. Question: Should I remove the hardware raid on c1t2d0 first? My...

8. Solaris

Hardware raid patching

Dear All , we have hardware raid 1 implemented on Solaris Disks. We need to patch the Servers. Kindly let me know how to patch hardware raid implemented Servers. Thanks... Rj

9. Solaris

Hardware RAID using three disks

Dear All , Pl find the below command , # raidctl -l Controller: 1 Volume:c1t0d0 Disk: 0.0.0 Disk: 0.1.0 Disk: 0.3.0 # raidctl -l c1t0d0 Volume Size Stripe Status Cache RAID Sub Size ...

LEARN ABOUT NETBSD

siisata

SIISATA(4)						   BSD Kernel Interfaces Manual 						SIISATA(4)

NAME

     siisata -- Silicon Image SATA-II controllers driver

SYNOPSIS

     siisata* at pci? dev ? function ?
     siisata* at cardbus? function ?

DESCRIPTION

     The siisata driver supports the Silicon Image SteelVine family of SATA-II controllers, interfacing the hardware with the ata(4) and atapi(4)
     subsystems.

     The following controllers are supported by the siisata driver:

	   Silicon Image SiI3124 4-port PCI/PCI-X
	   Silicon Image SiI3132 2-port PCI-Express x1
	   Silicon Image SiI3531 1-port PCI-Express x1

SEE ALSO

     ata(4), atapi(4), cardbus(4), pci(4), wd(4)

HISTORY

     The siisata driver first appeared in NetBSD 5.0.

AUTHORS

     The siisata driver was written by Jonathan A. Kollasch <jakllsch@kollasch.net>.

BUGS

     SATA Native Command Queuing is not yet supported.
     Device hot swapping is not yet supported.
     Silicon Image's Software RAID is not yet supported by the
	     ataraid(4) driver.  raid(4) can be used instead.

BSD
								   July 19, 2009							       BSD