06-28-2002
Suggest you boot cdrom -s and attempt fsck on all your normal partitions (/dev/rdsk/cXtXdX).
But, if you are just looking for what the boot-file should be:
How do I configure the system to boot a 32-bit kernel?
If the Ultra machine meets the hardware and software requirements for 64-bit boot, the boot-file variable must be set to kernel/unix. If not, then the machine will boot 64-bit. The boot-file variable can be set by either the Solaris eeprom command or the OBP setenv command.
eeprom: Login as root and use the eeprom command to set the boot-file parameter to the 32-bit kernel:
# /usr/sbin/eeprom boot-file="kernel/unix"
The next system reboot will boot the 32-bit kernel.
setenv: From the system's OBP OK> prompt, use the setenv command to set the boot-file parameter to the 32-bit kernel:
OK> setenv boot-file kernel/unix
It doesn't matter that you aren't running a 64-bit kernel - to boot it as 32 the boot-file can be empty on Solaris 2.6 - but since you asked, that is what goes in there "kernel/unix".
As far as the error you received - found the following bug reports on Sunsolve:
1. boot: error loading interpreter (misc/krtld)
Bug Reports: 4638108 6%
15 Feb 2002
2. X86 fails installation when "/" is partitioned to be bigger than 1024 cylinders
Bug Reports: 1259819 3%
25 Oct 1996
3. Reconfiguration didn't success after a stop A
Bug Reports: 4398062 3%
11 Jul 2001
None of them had a work around.
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
I have a Sun box that I am trying to get started up, but everytime it will crap out because it is bound to an NIS domain that no longer exists. The Master for that domain was put out of commission. It was suggested to me that I could boot off of the Installation cd for the OS (Solaris 8) and... (4 Replies)
Discussion started by: Jody
4 Replies
2. Solaris
Hi,
I have a Sun 3500 server on which i installed solaris 8 and have also installed veritas 4.0 on it. i dont know why from the time i have built this server whenever i try to boot it, the server doesnot come back smooth.... i have got to connect a laptop to the serial port of the server and... (3 Replies)
Discussion started by: ishila
3 Replies
3. Solaris
Hello
I have Sun Ultra 10 with Solaris 7 installed on it.
Sometimes back
after that the machine use to get hang .Even after
rebooting the system was not booting.
I have manually switch on /off many times from the
power board itself .Once in a while it
use to boot .After... (12 Replies)
Discussion started by: turki_00
12 Replies
4. Solaris
Hi,
I have a sun ultra enterprise 450 server. This server powers on and a white screen appears with the system and network information.
But it doesnot boot up completely. Booting operation wil be halted by a warning:
\usr\sbin\fsck not found. Most likely the mount of \usr failed or the... (5 Replies)
Discussion started by: tgashwini
5 Replies
5. Solaris
Dear All,
I am facing a specfic problem with my New SunFire T2000.Recently we bought new sunfire T2000 sparc server.When i am trying to install solaris 10 through cdrom , I get error messgae
Error:Last Trap: Instaruction Access Exception
{0} ok boot cdrom
Boot device:... (6 Replies)
Discussion started by: solaris8in
6 Replies
6. Solaris
Got the console cable all connected up and got tot he ok prompt.
Typed in boot cdrom and got the following:
ok boot cdrom
Boot device: /pci@8,700000/scsi@6/disk@6,0:f File and args:
ERROR: /packages/deblocker: Last Trap: Corrected ECC Error
Can't read disk label.
Can't open disk... (4 Replies)
Discussion started by: bbbngowc
4 Replies
7. Solaris
Hi all,
I am getting boot time message for sun E420R server. I need urgent help.
Hardware Power ON
CPU Offline (not present)
Master CPU : 0000.0001.0055.11a0
CPU Offline (not present)
CPU Offline (not present)
Master E$ : 0000.0000.0040.0000
Button Power ON (0 Replies)
Discussion started by: PUSHPARAJA
0 Replies
8. Solaris
Sun Fire V210, No Keyboard
Copyright 1998-2003 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.13.2, 4096 MB memory installed, Serial #61203679.
Ethernet address 0:3:ba:a5:e4:df, Host ID: 83a5e4df.
Boot device: net File and args:
100 Mbps FDX Link up
Timeout waiting for... (5 Replies)
Discussion started by: Mrudhul
5 Replies
9. Solaris
Booting problem on Sun 3500
Hi,
I have a Sun 3500 server on which i installed solaris 5.2 installed . i dont know why from the time i have built this server whenever i try to boot it, the server doesnot come back smooth.i got a message Sync file system than restart
some times showing ok... (2 Replies)
Discussion started by: najeer
2 Replies
10. Solaris
Hello
I have an old sun fire v250 server that I am trying to revive.
I am trying to boot it from cdrom to install the OS (Solaris 10). The original data in the disk is corrupt and I am trying to do a new clean install. However I encounter the following errors.
Does it look like the disk itself... (1 Reply)
Discussion started by: br1an
1 Replies
LEARN ABOUT DEBIAN
gst-complete
gst-complete-0.8(1) User Commands gst-complete-0.8(1)
NAME
gst-complete-0.8, gst-complete - perform bash completion for gst-launch command lines
SYNOPSIS
complete -Cgst-complete-0.8 gst-launch
gst-complete [--gst-list-mm] [--gst-mm=string] [--print]
DESCRIPTION
gst-complete-0.8 enables bash to provide context-sensitive tab completion for gst-launch command lines. See gst-launch(1) for the syntax of
gst-launch command lines.
You must have a version of bash that supports programmable completion. Such versions of bash provide the complete built-in command.
gst-complete is a wrapper script that runs the latest installed version of gst-complete-X.X. For example, if both gst-complete-0.7 and gst-
complete-0.8 are installed on your system, gst-complete runs gst-complete-0.8.
OPTIONS
The following options are supported by gst-complete-0.8 and gst-complete:
--help Display detailed usage message. You can also use -? to specify this option.
The following options are supported by gst-complete only:
--gst-list-mm List found major/minor versions. This option displays the versions that are available.
--gst-mm=string Force major/minor version. This option enables you to specify a specific version to run, if you do not want to run the
default version.
--print Print wrapped command line. This option displays the command that will be run, and then runs the command.
EXAMPLES
Example 1: Generating the Registry of Available Plugins by Running gst-compprep
Run the following command in your .bash_profile or other appropriate place:
example% complete -C gst-complete-0.8 gst-launch
Example 2: Running the Wrapper Script and Displaying the Command Name
example% gst-complete --print
/usr/bin/gst-complete-0.8
FILES
The following files are used by this application:
/usr/bin/gst-complete-0.Executable for bash completion for gst-launch
/usr/bin/gst-complete Wrapper script that runs the latest installed version of gst-complete-X.X
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWgnome-media |
+-----------------------------+-----------------------------+
|Interface stability |External |
+-----------------------------+-----------------------------+
SEE ALSO
gst-compprep(1), gst-feedback(1), gst-inspect(1), gst-launch(1), gst-launch-ext(1), gst-md5sum(1), gst-register(1), gst-thumbnail(1), gst-
typefind(1), gst-xmlinspect(1), gst-xmllaunch(1), gstreamer-properties(1), libgstreamer-0.8(3), libgstgetbits(3)
NOTES
Original man page written by the GStreamer team at http://gstreamer.net/.
Updated by Brian Cameron, Sun Microsystems Inc., 2004.
SunOS 5.10 14 Oct 2004 gst-complete-0.8(1)