Login or Register to Ask a Question and Join Our Community

Sponsored Content
Full Discussion: Asterisk / SIP Question.
Top Forums UNIX for Advanced & Expert Users Asterisk / SIP Question. Post 302130591 by cbkihong on Tuesday 7th of August 2007 01:46:43 AM
Old 08-07-2007
If you understand SIP, you should know that any SIP client needs to register to a SIP proxy to make it known to the proxy about its location (IP address, port etc.). Asterisk can act as a SIP proxy. I'm not sure about the exact "sip phone" you mentioned. But if your SIP phone is reachable over the LAN (i.e. has IP address), then you may configure it to register to the Asterisk server on the LAN. Exactly how to configure depends on how you would like to set it up, really.

How did you set up your Asterisk? If you compile and install manually, there is a chance for you to install a set of sample configuration with Asterisk. It would include sip.conf. For SIP, you just have to look into that file for SIP profiles and other related configuration (dtmfmode, jitter buffer, etc.). If your system is AsteriskNow or Trixbox based, they should be there out of the box.

By the way, Asterisk Forums :: Index is likely a better place than here for Asterisk questions.
 

We Also Found This Discussion For You

1. IP Networking

How to interconnect two Asterisk Servers with a SIP trunk Internationally

How to interconnect two Asterisk Servers with a SIP trunk Internationally Is it possible to setup an asterisk box in ex. Colombia S.A and another in the USA, setting up trunks between the boxes to speak to each other via sip or aix, create extensions, forward any incoming call on that local... (0 Replies)
Discussion started by: metallica1973
0 Replies

LEARN ABOUT NETBSD

sip

SIP(4)							   BSD Kernel Interfaces Manual 						    SIP(4)

NAME

     sip -- SiS 900-based Ethernet driver

SYNOPSIS

     sip* at pci? dev ? function ?

     Configuration of PHYs is also necessary.  See mii(4).

DESCRIPTION

     The sip device driver supports Ethernet interfaces based on the Silicon Integrated Systems SiS 900, SiS 7016, and National Semiconductor
     DP83815 Ethernet chips.

     The SiS 900 is found on many motherboards featuring SiS chipsets, and on some embedded systems, and has a built-in PHY.  The SiS 7016 is an
     older version of the chip, which uses an external PHY.

     The National Semiconductor DP83815 is found on NetGear FA-311 and FA-312 Ethernet boards, and has a built-in PHY.

SEE ALSO

     arp(4), ifmedia(4), mii(4), netintro(4), pci(4), ifconfig(8)

HISTORY

     The sip driver first appeared in NetBSD 1.5.

AUTHORS

     The sip driver was originally written by Jason R. Thorpe for Network Computer, Inc.

     It has since been modified by Jason R. Thorpe <thorpej@NetBSD.org> and Allen Briggs <briggs@NetBSD.org>.

BSD
								   May 17, 2001 							       BSD
All times are GMT -4. The time now is 09:40 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy