8 More Discussions You Might Find Interesting
1. AIX
We have an IBM Power 710. It has a USB port on the front. I have done some searching and see that there is information out there on how to create a JFS2 file system on USB drives. A few have commented that they would not recommend it, if the server is important, may crash the server... Just... (0 Replies)
Discussion started by: mbenedi
0 Replies
2. HP-UX
I have used ioscan -fnC tape and the system identified the tape drive. what is the command to show a listing of what is on the tape? I have used ls /dev/rmt/rmt0 to no avail. can anyone help?
Thanks in advance (10 Replies)
Discussion started by: Randydog
10 Replies
3. Solaris
Hey folks,
Linux admin here, forced to use Opensolaris to try to use ufsdump/ufsrestore to get some data of some old tapes.
I've got Opensolaris 2009.06 on x86 and a Sony SDX-700V.
As a "control" experiment, I booted the system with a Linux live CD and the tape drive worked perfectly.
... (2 Replies)
Discussion started by: eddy_sysad
2 Replies
4. Solaris
Hi All,
I recently got a connection to the SAN through a fibre channel on my solaris box:
#luxadm -e port
/devices/pci@1d,700000/SUNW,qlc@1/fp@0,0:devctl CONNECTED
#ls -l /dev/cfg
lrwxrwxrwx 1 root root 48 Feb 23 12:31 c4 -> ../../devices/pci@1d,700000/SUNW,qlc@1/fp@0,0:fc
I then... (2 Replies)
Discussion started by: dede
2 Replies
5. Solaris
Hello all,
how can i see configured fc tapes in solaris system and how can i install a new fc shared tape device , thanks
Best Regards (2 Replies)
Discussion started by: bogacd
2 Replies
6. AIX
I have tape drive in one Lpar. when i saw that time tape is in defined state. After that i deleted the tape drive using the rmdev -R command. Then fired the cfgmgr -v command. But I am not getting the tape drive. Now the drive is even not in defined state also. It is not shown the tape drive. How... (1 Reply)
Discussion started by: pernasivam
1 Replies
7. Solaris
I use Sunfire V480R , and i am seeing lot of scsi transport errors for the root drive & i think it is going to die . the system is having 2 drives & the second drive is kept unused . can someone guide me how do i clone the root drive to the seconddrive and make that bootable . (13 Replies)
Discussion started by: skamal4u
13 Replies
8. UNIX for Dummies Questions & Answers
Hi,
I need to restore my tape backup, when I type "tape status" it gives;
status : ready beginning-of-tape write-protected
soft errors : 0
hard errors : 0
underruns : 3
but... (4 Replies)
Discussion started by: alisevA3
4 Replies
AMTAPE(8) System Administration Commands AMTAPE(8)
NAME
amtape - Control Amanda changers
SYNOPSIS
amtape [-o configoption...] config subcommand [subcommand_options...]
DESCRIPTION
Amtape is the command-line interface to Amanda's tape changers (amanda-changers(7)) and to the taperscan algorithm (amanda-taperscan(7)).
Tape changers maintain a notion of the current slot for each configuration. This may or may not correspond to an actual physical state of
the device, but is used by some taperscan algorithms to minimize searching through the slots.
Amtape uses the default changer. To use a different changer, use the config override option, e.g., -otpchanger=otherchanger.
SUBCOMMANDS
label label
Search for and load the Amanda tape with label [label], also setting the current slot.
slot slot
Load the volume in the given slot, also setting the current slot. The slot names current, next, first, and last have special meaning.
current
Shorthand for slot current.
inventory
Show the contents of all slots, based on the changer's cached metadata. This is a quick operation as it does not load or unload any
volumes, but is not supported by all changers.
show [slots]
Show the contents of all slots (or listed slots) by loading each slot and reading its label. This can be very slow. The slots arguments
is of the form 1,3-5,7.
reset
Reset the changer to a known state. This subcommand is intended to clear any unknown and potentially incorrect state the changer may
have stored.
eject [drive]
Eject the tape currently in the drive. This only applies to some changers. Specify a drive (by drive number) if more than one drive is
available.
clean [drive]
If a cleaning tape is defined for the changer, used it to clean the specified drive. The [drive] is optional if the changer only has
one drive.
taper
Run the taperscan algorithm (see amanda-taperscan(7)), displaying information about the progress of the scan.
update [what]
Update changer state. Consult amanda-changers(7) for changer-specific details on the format of what.
-o configoption
See the "CONFIGURATION OVERRIDE" section in amanda(8).
SEE ALSO
amanda(8), amanda-changers(7), amanda-taperscan(7), amanda-devices(7)
The Amanda Wiki: : http://wiki.zmanda.com/
AUTHORS
Dustin J. Mitchell <dustin@zmanda.com>
Zmanda, Inc. (http://www.zmanda.com)
James da Silva <jds@amanda.org>
Stefan G. Weichinger <sgw@amanda.org>
Amanda 3.3.3 01/10/2013 AMTAPE(8)