9 More Discussions You Might Find Interesting
1. AIX
HI,
Does anyone installed a GPS from his Serial port to an IBM Server serial port with AIX 5.X
I would like the rs232 configuration you used on the GPS, and the ttys configuration from your server.
Thanks in advance !!! (8 Replies)
Discussion started by: trevian3969
8 Replies
2. Solaris
Hello,
I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build.
The first part is what confuses me -the cabling.
I am coming from a Windows machine (w/appropriate... (5 Replies)
Discussion started by: joboy
5 Replies
3. Debian
Dear List -
I am trying to capture data from a serial port and write it to a file.
/var/www$ cat /dev/ttyS0 > scale_value.html
cat: /dev/ttyS0: Device or resource busy
/var/www# cat /proc/tty/driver/serial
serinfo:1.0 driver revision:
0: uart:16550A port:000003F8 irq:4 tx:90... (11 Replies)
Discussion started by: Meow613
11 Replies
4. Programming
hi, I've a problem on my C/C++ program with Posix Library.
I have to read data from the serial but I have incorrect data, in fact I get a bunch of zeros:
"2953.3174, 2785.2126, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0 , 0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0 ,... (24 Replies)
Discussion started by: enaud
24 Replies
5. Shell Programming and Scripting
hello all,
please any one can provide me the shell script to write data to /dev/ttyS1
and read responce from /dev/ttyS1 and compare the responce to some string ..
thnxx
---------- Post updated at 03:35 PM ---------- Previous update was at 11:46 AM ----------
any body help me..
how do i... (1 Reply)
Discussion started by: yashwantkumar
1 Replies
6. Solaris
Hi Everyone,
In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected... (3 Replies)
Discussion started by: bobby320
3 Replies
7. SCO
dear sir,
pls. can you help me ? , my os is unix sco 5.0.4 and ,server dat derive (1,4gb)
not working, now i want to transfer my server data in other machine (unix/other possible) by serial port/other port comminication.
thanks
pankaj raval (2 Replies)
Discussion started by: pankajbraval
2 Replies
8. Programming
Hai there,
Can any one provide me with a ansi c source code for
opening com1 or com2 and read data. The port is connected to
another serial communication device on rs232 port.
The o/s is Sco Unix 5.0.6
Matter urgent
Viswanath (0 Replies)
Discussion started by: viswanath
0 Replies
9. Programming
Hi every body, i have the following problem :
I need to read incoming data from a serial port, this port has connected a weigth device to it that send the weigth and i need to read this data to my aplication, i had this problem in Window Enviroment and i resolve with a "C" routine, but in Unix... (1 Reply)
Discussion started by: jricardorm
1 Replies
UHSO(4) BSD Kernel Interfaces Manual UHSO(4)
NAME
uhso -- Option N.V. Wireless WAN modem driver
SYNOPSIS
uhso* at uhub? port ?
HARDWARE
The uhso driver supports at least the following adapters:
GlobeSurfer HSUPA
GlobeSurfer iCON 7.2
GlobeTrotter Express 40x
GlobeTrotter Express HSUPA
GlobeTrotter HSUPA
GlobeTrotter Max HSDPA
GlobeTrotter Module 382
GlobeTrotter iCON 225
GlobeTrotter iCON 321
GlobeTrotter iCON 322
GlobeTrotter iCON 401
GlobeTrotter iCON 505
GlobeTrotter iCON EDGE
DESCRIPTION
The Option N.V. modems appear at first as a umass(4) device containing the Windows and MacOS drivers and, upon receipt of a SCSI "REZERO
UNIT" command, will detach from the USB bus and reattach as a Wireless WAN modem. Unless disabled by clearing the sysctl(8) variable
hw.uhso.autoswitch, the driver will handle that automatically.
The modems provide a number of IO channels spread over several USB interfaces which are mapped by function to a standard port number in each
driver instance. The defined channels are:
Channel Name Port
Control 0
Diagnostic 1
Diagnostic 2 2
Application 3
Application 2 4
GPS 5
GPS Control 6
PC Smartcard 7
Modem 8
MSD 9
Voice 10
Network 11
Apart from the Network port, which is attached as a network interface, the ports are attached as tty(4) devices using the port number as the
minor device number. In order to connect using pppd(8), the Modem tty should be used (eg /dev/ttyHS0.08).
The Network port provides a direct IPv4 interface, but before this can be used the modem needs to be placed in connected mode and network
settings subsequently retrieved using the proprietary "_OWANCALL" and "_OWANDATA" AT commands on the Control port.
Note that the Modem and Network ports should not be enabled at the same time for USB performance reasons.
FILES
/dev/ttyHS?.??
/dev/dtyHS?.??
/dev/ctyHS?.??
SEE ALSO
intro(4), netintro(4), tty(4), uhub(4), usb(4), ifconfig(8)
HISTORY
This driver originated as the hso module for FreeBSD written by Frederik Lindberg. It was rewritten for NetBSD, and to provide more complete
device support with information extracted from the hso driver for Linux provided by Option N.V.
The rewrite and this manual page by Iain Hibbert.
BSD
August 26, 2011 BSD