Login or Register to Ask a Question and Join Our Community


Solaris

Simple port fowarding help

Login to Discuss or Reply to this Discussion in Our Community

 
Thread Tools Search this Thread
Operating Systems Solaris Simple port fowarding help
# 1  
Old 05-24-2008
Simple port fowarding help
Hello all am new to unix
i have acces to unix machine s commandline at my collage
wen entering uname -a command i get this output
Code:
SunOS ws7 5.8 Generic_108528-20 sun4u sparc SUNW,Sun-Blade-1500

all i need help in seting up a simple prort forward from this machine ie this machine listen on tcp port xxx an it redirect connection to remote host yyy.yyy.yyy.yyy on port xxx
please help me thanks a lot...
# 2  
Old 05-24-2008
In Solaris 8 there was no port forwarding software by default, in addition if you want to forward a port you will in many cases need root access, so you may be fighting a loosing battle here.

You could try port forwarding in ssh to see if you can achieve what you need.
# 3  
Old 05-25-2008
Thankr for ur replay sir.. I talked with my teacher a long time and finaly he agreed to give me root act for a short time
btw ssh is not instaled telnet is available
can u please instruct me wat are the steps to do
thanks a lot...
# 4  
Old 05-26-2008
what about rinet?
# 5  
Old 05-26-2008
Whats is rinet ? I am a newbie to unix thanks
# 6  
Old 05-26-2008
hmm..it is a TCP port forwarding/redirection utility. Do you see the rinetd.conf in the /etc directory? Probably not..but if you can downlaod and install, which you would need the root also, take a look at this,

RINETD(8)

I used to run rinetd in my solaris 10 but not sure whether it runs in 8 or not.
Login or Register to Ask a Question

Previous Thread | Next Thread

9 More Discussions You Might Find Interesting

1. UNIX for Beginners Questions & Answers

Bash script, find the next closed (not in use) port from some port range.

hi, i would like to create a bash script that check which port in my Linux server are closed (not in use) from a specific range, port range (3000-3010). the print output need to be only 1 port, and it will be nice if the output will be saved as a variable or in same file. my code is: ... (2 Replies)
Discussion started by: yossi
2 Replies

2. Shell Programming and Scripting

Help Generate new port base on the last port but not in used by other application

Hi Expert, Anybody can figure it out on how to generate new port base on my last port let say my last port var1=124 and increment for new port 125,126 but this new two ports need to look at first if this port is not in used by any service, if the port is in used add 1 to new port and if in used... (6 Replies)
Discussion started by: lxdorney
6 Replies

3. Solaris

How to find port number wwn of particular port on dual port HBA,?

please find the below o/p for your reference bash-3.00# fcinfo hba-port HBA Port WWN: 21000024ff295a34 OS Device Name: /dev/cfg/c2 Manufacturer: QLogic Corp. Model: 375-3356-02 Firmware Version: 05.03.02 FCode/BIOS Version: BIOS: 2.02; fcode: 2.01;... (3 Replies)
Discussion started by: sb200
3 Replies

4. Solaris

Cabling and adapters to communicate to service processor serial port from Windows PC with USB port.

Hello, I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build. The first part is what confuses me -the cabling. I am coming from a Windows machine (w/appropriate... (5 Replies)
Discussion started by: joboy
5 Replies

5. IP Networking

Tcp ip port open but no such process (merged: Release A Port)

i want to kill a tcp connection by killing its pid with netstat -an i got the tcp ip connection on port 5914 but when i type ps -a or ps-e there is not such process running on port 5914 is it possible that because i do not log on with proper user account i can not see that process running? (30 Replies)
Discussion started by: alinamadchian
30 Replies

6. IP Networking

Simple port fwd. 1 interface

I have been tearing my hair out with this (and not enough left to keep going). I have a linux box (raspberry pi) single ethernet interface in a heavily filtered DMZ with external ports fwd'd that can access an internal IP's (different subnet). I want to forward the traffic. Should be simple I... (0 Replies)
Discussion started by: martyuiop
0 Replies

7. IP Networking

telnet for port 5433 is not working while it works for port 22

Hi, I am trying to set up a dev environment and I have Ubuntu server (10.16.1.92) and a CentOS VM (10.16.3.235) on this. On the CentOS I have a program running on port 5433. Now my problem is that I am unable to telnet this port from another Windows server whereas I can telnet port 22 from... (5 Replies)
Discussion started by: rishav
5 Replies

8. Solaris

How to enable Serial port on ILOM, when Network Port is enabled in parallel

Hi Everyone, In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected... (3 Replies)
Discussion started by: bobby320
3 Replies

9. Solaris

luxadm -e port shows one port not connected

hi i have a sun machine which has one hba 2ports; out of which one port says it is not connected # luxadm -e port /devices/pci@1d,700000/SUNW,qlc@1/fp@0,0:devctl CONNECTED /devices/pci@1d,700000/SUNW,qlc@1,1/fp@0,0:devctl NOT CONNECTED but both... (9 Replies)
Discussion started by: anwesh
9 Replies
Login or Register to Ask a Question