05-26-2008
hmm..it is a TCP port forwarding/redirection utility. Do you see the rinetd.conf in the /etc directory? Probably not..but if you can downlaod and install, which you would need the root also, take a look at this,
RINETD(8)
I used to run rinetd in my solaris 10 but not sure whether it runs in 8 or not.
9 More Discussions You Might Find Interesting
1. Solaris
hi i have a sun machine which has one hba 2ports;
out of which one port says it is not connected
# luxadm -e port
/devices/pci@1d,700000/SUNW,qlc@1/fp@0,0:devctl CONNECTED
/devices/pci@1d,700000/SUNW,qlc@1,1/fp@0,0:devctl NOT CONNECTED
but both... (9 Replies)
Discussion started by: anwesh
9 Replies
2. Solaris
Hi Everyone,
In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected... (3 Replies)
Discussion started by: bobby320
3 Replies
3. IP Networking
Hi,
I am trying to set up a dev environment and I have Ubuntu server (10.16.1.92) and a CentOS VM (10.16.3.235) on this. On the CentOS I have a program running on port 5433. Now my problem is that I am unable to telnet this port from another Windows server whereas I can telnet port 22 from... (5 Replies)
Discussion started by: rishav
5 Replies
4. IP Networking
I have been tearing my hair out with this (and not enough left to keep going).
I have a linux box (raspberry pi) single ethernet interface in a heavily filtered DMZ with external ports fwd'd that can access an internal IP's (different subnet).
I want to forward the traffic. Should be simple I... (0 Replies)
Discussion started by: martyuiop
0 Replies
5. IP Networking
i want to kill a tcp connection by killing its pid
with netstat -an i got the tcp ip connection on port 5914
but when i type ps -a or ps-e there is not such process running on port 5914
is it possible that because i do not log on with proper user account i can not see that process running? (30 Replies)
Discussion started by: alinamadchian
30 Replies
6. Solaris
Hello,
I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build.
The first part is what confuses me -the cabling.
I am coming from a Windows machine (w/appropriate... (5 Replies)
Discussion started by: joboy
5 Replies
7. Solaris
please find the below o/p for your reference
bash-3.00# fcinfo hba-port
HBA Port WWN: 21000024ff295a34
OS Device Name: /dev/cfg/c2
Manufacturer: QLogic Corp.
Model: 375-3356-02
Firmware Version: 05.03.02
FCode/BIOS Version: BIOS: 2.02; fcode: 2.01;... (3 Replies)
Discussion started by: sb200
3 Replies
8. Shell Programming and Scripting
Hi Expert,
Anybody can figure it out on how to generate new port base on my last port let say my last port var1=124 and increment for new port 125,126 but this new two ports need to look at first if this port is not in used by any service, if the port is in used add 1 to new port and if in used... (6 Replies)
Discussion started by: lxdorney
6 Replies
9. UNIX for Beginners Questions & Answers
hi,
i would like to create a bash script that check which port in my Linux server are closed (not in use) from a specific range, port range (3000-3010).
the print output need to be only 1 port, and it will be nice if the output will be saved as a variable or in same file.
my code is:
... (2 Replies)
Discussion started by: yossi
2 Replies
optisa(1) User Commands optisa(1)
NAME
optisa - determine which variant instruction set is optimal to use
SYNOPSIS
optisa instruction_set...
DESCRIPTION
optisa prints which instruction_set out of the ones specified in the command will perform best on this machine. In this case, ``best''
is defined by the order in which instruction set names are returned by isalist(1). Possible values for instruction_set are given in
isalist(5).
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
EXIT STATUS
The following exit values are returned:
0 One of the instruction_set values you specified is printed by this command.
1 There is no output; that is, this machine cannot use any instruction_set that you specified with the optisa command.
SEE ALSO
isalist(1), uname(1), attributes(5), isalist(5)
NOTES
optisa is preferable to uname -p or uname -m (see uname(1)) in determining which of several binary versions of a given program should be
used on the given machine.
SunOS 5.10 25 Jul 1997 optisa(1)