Hardware RAID

9 More Discussions You Might Find Interesting

1. Solaris

Hardware RAID using three disks

Dear All , Pl find the below command , # raidctl -l Controller: 1 Volume:c1t0d0 Disk: 0.0.0 Disk: 0.1.0 Disk: 0.3.0 # raidctl -l c1t0d0 Volume Size Stripe Status Cache RAID Sub Size ...

2. Solaris

Hardware raid patching

Dear All , we have hardware raid 1 implemented on Solaris Disks. We need to patch the Servers. Kindly let me know how to patch hardware raid implemented Servers. Thanks... Rj

3. Solaris

Software RAID on top of Hardware RAID

Server Model: T5120 with 146G x4 disks. OS: Solaris 10 - installed on c1t0d0. Plan to use software raid (veritas volume mgr) on c1t2d0 disk. After format and label the disk, still not able to detect using vxdiskadm. Question: Should I remove the hardware raid on c1t2d0 first? My...

4. HP-UX

Hardware RAID in HP Unix rp3440

Hi Gurus, Can anyone tell me the Hardware RAID configuration in HP Unix rp3440 model server containing HP UX B.11.11 OS version. Thanks in Advance. BR, Prasanth

5. Hardware

Sun T3-1 hardware RAID

Hi all I've just received my T3-1. It has 8 disks and I would like to configure RAID1 on the disks. The Sun documentation states that you can either use the OpenBoot PROMP utility called Fcode or you can use software via the Solaris OS. The documentation doesn't make it clear if: 1. The...

6. Solaris

Hardware Raid - LiveUpgrade

Hi, I have a question. Do LiveUpgrade supports hardware raid? How to choose the configuration of the system disk for Solaris 10 SPARC? 1st Hardware RAID-1 and UFS 2nd Hardware RAID-1 and ZFS 3rd SVM - UFS and RAID1 4th Software RAID-1 and ZFS I care about this in the future to take...

7. UNIX for Dummies Questions & Answers

RAID software vs hardware RAID

Hi Can someone tell me what are the differences between software and hardware raid ? thx for help.

8. Solaris

T2000 Hardware RAID

Hi, I have a root with hardware RAID on c0t0d0 and c0t2d0. I would like to set the boot device sequence in OBP for both hdds. I have checked in ls -l /dev/rdsk/ for the path of c0t2d0 but it does not exist. Can anyone shed some lights on this? AVAILABLE DISK SELECTIONS: 0....

9. Solaris

how to hardware RAID 1 on T5120

Hi, I have t5120 sparc and I have 2 146 G drives in the system. I will be installing solaris 10 and also want the system mirrored using Hardware RAID "1" The System did come preinstalled as it comes from sun. I did not do much on it. I booted system using boot cdrom -s gave format...

LEARN ABOUT NETBSD

ciss

CISS(4) 						   BSD Kernel Interfaces Manual 						   CISS(4)

NAME

     ciss -- HP/Compaq Smart ARRAY 5/6 RAID controllers

SYNOPSIS

     ciss* at pci? function ?

DESCRIPTION

     The ciss driver provides support for the CISS interface implemented by fifth and later generations of the HP/Compaq Smart ARRAY family of
     controllers.

     The CISS interface is defined in the document entitled CISS Command Interface for SCSI-3 Support Open Specification, Version 1.04, Valence
     Number 1, Compaq Computer Corporation, 2000/11/27.

     This driver supports several Compaq and HP controllers implementing the CISS interface, including:

     o	 Compaq Smart Array 5300 version 1
     o	 Compaq Smart Array 5300 version 2
     o	 Compaq Smart Array 5i version 1
     o	 Compaq Smart Array 5i version 2
     o	 HP Smart Array 5312
     o	 HP Smart Array 6i
     o	 HP Smart Array 641
     o	 HP Smart Array 642
     o	 HP Smart Array 6400
     o	 HP Smart Array 6400 EM
     o	 HP Smart Array E200
     o	 HP Smart Array E200i
     o	 HP Smart Array P400
     o	 HP Smart Array P400i
     o	 HP Smart Array P600
     o	 HP Smart Array P800
     o	 HP Smart Array V100
     o	 HP Smart Array 1 through 13

     These controllers support RAID 0, RAID 1, RAID 5, JBOD, and superpositions of those configurations.

     Although the controllers are actual RAID controllers, the ciss driver makes them look just like SCSI controllers.	All RAID configuration
     must be done through the controllers' BIOSes.

     Hardware from previous generations of this product family may be supported by the cac(4) driver.

SEE ALSO

     bio(4), cac(4), intro(4), pci(4), scsi(4), sd(4)

HISTORY

     The ciss driver first appeared in NetBSD 3.1.

AUTHORS

     The ciss driver was written by Michael Shalayeff <mickey@openbsd.org>, and ported to NetBSD by Tonnerre Lombard <tonnerre@netbsd.org>.

BSD
								   May 28, 2008 							       BSD

Solaris