create vxvm volume

10 More Discussions You Might Find Interesting

1. Red Hat

No space in volume group. How to create a file system using existing logical volume

Hello Guys, I want to create a file system dedicated for an application installation. But there is no space in volume group to create a new logical volume. There is enough space in other logical volume which is being mounted on /var. I know we can use that logical volume and create a virtual...

2. Solaris

How to recover wrongly deleted volume in VxVM?

Hi On solaris 10 system my one veritas volume got accidently deleted. Now could any one tell me how to recover it. If I am taking regular backup of disk group of that volume through vxconfigbackup as I want to recover only particular volume only.

3. Red Hat

Physical Volume Create Conundrum

I want to start by saying I already resolved my issue but I want to understand why I am seeing what I am seeing. I have a server with a RAID controller two 500GB drives and six 600GB drives. The two 500GB drives are mirrored and have the OS installed on them. The six 600GB they wanted set as...

4. UNIX for Dummies Questions & Answers

How to create a volume group, logical volume group and file system?

hi, I want to create a volume group of 200 GB and then create different file systems on that. please help me out. Its becomes confusing when the PP calculating PP. I don't understand this concept.

5. Red Hat

Create volume using LVM over 2 physical disks

I wanted to know how we can combine volumes over 2 physical drives. # fdisk -l Disk /dev/sda: 42.9 GB, 42949672960 bytes 255 heads, 63 sectors/track, 5221 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 ...

6. AIX

Create new Volume Group

Good afternoon all, I'll probably confuse everyone as I'm a Windows guy dealing with AIX 6.1 and can't quite figure out how to do something. I have a P520 server running 2 LPARs and we have an IVM (not HMC).Within the IVM under Virtual Storage Management, when I check the Physical Volumes, I have...

7. Solaris

VxVM volume extending Prerequisites

Hellow Experts, Could anyone tell me the Prerequisites for extending a Volume on VxVM.

8. Solaris

Create a logical volume from a mirror and single disk?

I have two 72GB disks that are mirrored and mounted (/backup). I have a 18GB drive in an array I just attached to the server, which is running Solaris 9. I need to create a new logical volume partition and make the existing mirror device (/dev/md/dsk/d34) and the array's 18GB drive a member of...

9. Solaris

How to add disk into Striped Volume VxVM

VxVM: How to add one more disk into v08 the stripe should change from 7/128 to 8/128 v v08 - ENABLED ACTIVE 8954292224 SELECT v08-01 fsgen pl v08-01 v08 ENABLED ACTIVE 8954292480 STRIPE 7/128 RW sd bkpdg35-01 v08-01 bkpdg35 17216 ...

10. HP-UX

How Can I Create A Volume Group With Two Hard Disks On Hp-ux C-3750

Hello All, I Am A New Member To This Group. I Want To Know How Can We Create Single Volume Group Using 2 Hard Disks. As We Require More Data To Be Stored We Need To Add A Hard Disk,but I Have A Doubt Whether We Can Increase The Size Of A Logical Volume Mounted On A Volume Group By Adding A...

LEARN ABOUT HPUX

pvremove

pvremove(1M)															      pvremove(1M)

NAME

       pvremove - remove LVM data structure from a physical volume

SYNOPSIS

DESCRIPTION

       The  command  clears  the LVM data structure on a disk, so that it is no longer an LVM physical volume.	The device may then be used by the
       file system or by other volume managers.

       The operation is denied if pv_path is assigned to a volume group.  The command only clears the LVM data structure on a  disk  if  the  disk
       does not belong to a volume group.  This avoids accidentally removing a valid physical volume under a volume group.  If the physical volume
       to be removed belongs to a volume group, use the command to first remove the volume group associated with the physical volume.

   Arguments
       recognizes the following arguments:

	      pv_path	The character (raw) device path name of a physical volume.

EXTERNAL INFLUENCES

   Environment Variables
       determines the language in which messages are displayed.

       If is not specified or is null, it defaults to "C" (see lang(5)).

       If any internationalization variable contains an invalid setting, all internationalization variables default to "C" (see environ(5)).

EXAMPLES

       Remove LVM data structure on the physical volume

SEE ALSO

       lvremove(1M), vgremove(1M), intro(7), lvm(7).

																      pvremove(1M)

Solaris