how to create luns in A1000

Thread Tools Search this Thread
Operating Systems Solaris how to create luns in A1000
# 1  
Old 09-02-2009
hi friends how we can create luns in A1OOO storage ..plzhelp its very urgent

when ever i am connect to A1000 raid controller through laptop with console cable with the help of hyperterminal..i isued serial port parameters which i mentioned below..

Set serial port parameters to:
38,400 baud
8 data bits
1 stop bit
No parity

but not connecting..
for A1000 which parameters required for getting raid console..

Last edited by DukeNuke2; 09-02-2009 at 01:01 PM..
# 2  
Old 09-02-2009
you need the "raidmanager" software to configure the array. if you'll go for the serial port, try to use 9600 baud...
Login or Register to Ask a Question

Previous Thread | Next Thread

9 More Discussions You Might Find Interesting

1. Ubuntu

Scan and create file systems in new LUNs

Hi I have a system running uname -a Linux cmoveldb02 3.2.0-29-generic #46-Ubuntu SMP Fri Jul 27 17:03:23 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux and I was told by the NetApp Admin that he has provided 5 LUNs of 1Tb, 200Gb and remaining 3 of 300Gb, but I am not able to see the new LUNs. I have... (4 Replies)
Discussion started by: fretagi
4 Replies

2. Solaris

Managing disk array on A1000

I would want to ask on what software do i need to configure disk array for StorEdge A1000. (Sun Enterprise 450 - currently installed with SUN Solaris 9.) Is it using RAID Manager 6.22? And is it compatible with SUN Solaris 9 or 10? Thanks in advance for reading or replying my post. (2 Replies)
Discussion started by: beginningDBA
2 Replies

3. Solaris

A5200 vs A1000

I'm currently planning to improve my skills on sun disk array and deciding whether to go with sun disk array A5200 or A1000. I have found a few good systems with decent price but still can't seem to find out which one to choose. For the host system, I have 1 ultra 5 and 1 e220r system. I will most... (5 Replies)
Discussion started by: agfa_109
5 Replies

4. Solaris

A1000 Disk storage array

I am new to the unix world. I have SunBlade 100 and A1000 Disk storage array with 12 Hard drives. I used SCSI card and SCSI cables to connect. When I do the format command,I can see disk storage as one disk instead of 12 disks as below. Could anybody can explain why? What should I do in order... (1 Reply)
Discussion started by: Dulasi
1 Replies

5. Solaris

How can i connect storedge A1000 to E250box?

Hello Experts, I am using E250 on that solais 10 5/08 installed. I am unable to see disks. I connected 2 disks in that storage of 18gb each. When I run format command it is showing that 2 disks one is operating system and another one is 6MB. I checked probe-scsi and probe-scsi-all at ok... (6 Replies)
Discussion started by: younus_syed
6 Replies

6. Solaris

A1000 Solaris 10 on Blade 1000

I have a SUN Blade 1000 running Solaris 10 and an A1000 array. I know that this combo is not supported by SUN but will it work? The raid manager software is installed and it says that the firmware needs to be upgraded -it is at I think level 2.05 something. I can see all the disks in a... (13 Replies)
Discussion started by: tribbles
13 Replies

7. UNIX for Dummies Questions & Answers

A1000 Battery Question

After searching and finding the link to the A1000 pdf ( ) my questions are: 1) I have a battery failure on a A1000. I know that caching is disabled and it reports to see log. After reading the manual I have learned that the battery is a data-cache... (2 Replies)
Discussion started by: finster
2 Replies

8. UNIX for Advanced & Expert Users

Raid A1000 with E450 and E250.

Hi, I'm facing problem in connecting a Raid A1000 to E250 and E450. ( Both machines with Solaris 2.6 OS and patched, with different scsi-initiator-ids - 7 & 3 ). BTW, I'm not using this setup to access raid data from both machines simultaneously. There is Veritas Cluster Server monitoring... (1 Reply)
Discussion started by: shibz
1 Replies

9. UNIX for Dummies Questions & Answers

veritas/STOREDGE A1000

Hi, I am a Dba and very new to filesystems and stuff. I think that we have Veritas filesystems on my Sun SOlaris 5.8 box, how do I confirm this: all my filesystems are mounted like this: /dev/vx/dsk... Now we are also using disk arrays (storedge a1000) how do I access them from the system.... (1 Reply)
Discussion started by: knarayan
1 Replies
Login or Register to Ask a Question