How to install UNIX 5.0.7 on an ML 330 G3 server with IDE array instead of scsi bus

10 More Discussions You Might Find Interesting

1. Red Hat

Scsi bus scan

Hi, I have presented a LUN to a VM (RHEL 5.8) and need to scan the scsi bus in order for the OS to pick it up. On FC attached hosts I can: echo "1" > /sys/class/fc_host/host0/issue_lip echo "- - -" > /sys/class/scsi_host/host0/scan ....but this does not work on my vm. ...

2. UNIX for Dummies Questions & Answers

Install SCSI Jaz drive in Sparc Solaris

I recently got a Sun Sparc 10 Ultra with Solaris 10 installed on it. Now I'm trying to connect my SCSI Jaz drive to it. I moved my Adaptec AHA-2940U PCI SCSI card from my XP PC (where it was working OK) to the Sun and that's about as far as I got. I did a probe-scsi-all and got nothing back,...

3. BSD

How to rescan scsi bus without reboot on OpenBSD

Hello, My question as title, I don't know the exact command, anyone could tell me about it? Kevin

4. Solaris

SCSI Bus Reset

hey guys i got this in my logs what does this mean:

5. UNIX and Linux Applications

How to install Nagios on Unix server

Hi all, i have install nagios on my Linux Centos 5 server and i want to install the agent on unit server to monitor it. I can monitor a linux and windows servers but still looking for a article on how to intall nagios on Unix server. Thanx in advance

6. UNIX for Dummies Questions & Answers

Not able to install Oracle Workgroup Server on SCO Unix 5.0.2 box

After having to replace a video card and having a corrupt root directory, I had to wipe out and reinstall my SCO OpenServer Enterprise System 5.0.2. because nothing would work for the root password. I am now trying to reinstall the Oracel Workgroup Server SCO v7.1.5.2 and it tells me I need to...

7. UNIX for Dummies Questions & Answers

How to know what program is install on Unix server?

I would like to know how to check what program is install on the Unix system? like the add/remove inside the control panel can show what program installed.

8. UNIX for Dummies Questions & Answers

SCSI bus is hung

Anyone have any ideas what could be causing me to get the error "The SCSI bus is hung. Perhaps an external device is turned off"? This is occuring when I try to boot off of my external CDROM. I have tried this CDROM on 3 different systems, tried different SCSI cables, and different terminators...

9. UNIX for Dummies Questions & Answers

The difference between SCSI & IDE Hard disks.

Hello agian ! What is the difference between SCSI and IDE hard disks ? I have Intel PC and when i check i have Generic IDE TYPE DISK0 is IDE hard disk is ok for Solrais ? or should i buy the SCSI hard disk ? Thanks Abid Malik

10. Filesystems, Disks and Memory

Change rootdev from SCSI to IDE

Hi, I have been attempting for the last few hours to change the root device to IDE from and SCSI adapter ... after modifying who knows how many files... (system still runs as long as the SCSI controller is present) ... as soon as I take it out, it gives me a panic, saying that rootdev cannot be...

LEARN ABOUT NETBSD

njata

NJATA(4)						   BSD Kernel Interfaces Manual 						  NJATA(4)

NAME

     njata -- Workbit NinjaATA-32 CardBus IDE controller driver

SYNOPSIS

     njata* at cardbus? function ?
     njata* at cardbus? function ? flags 0x01	  # with wait 0x01

DESCRIPTION

     The njata driver provides support for the following Workbit Bus-Master CardBus IDE controller chips:

	   NinjaATA-32Bi  CardBus / PCMCIA dual mode IDE controller (``DuoATA'').  This controller is mainly used for portable drives.	This
			  driver supports the CardBus mode.

	   NPATA-32	  CardBus IDE controller.  This controller is widely used for CardBus CompactFlash adapters.

     These controllers are capable of bus-mastering for ATA PIO transfer.  The njata driver uses the bus-mastering PIO transfer unless transfer
     buffer is unaligned, and significantly reduces CPU usage for PIO-only ATA devices compared with usual PIO transfer.

CONFIGURATION

     The optional flags parameter is the ``wait'' value for ATA transfers.  Some combinations of host and device may fail without flags parameter
     or flags 0x00.  In this case try adding wait values like flags 0x01 or flags 0x11 (the wait parameter is composed of two 4bit values).
     Smaller wait values should be faster.  Too long waits may cause transfer errors.

SEE ALSO

     ata(4), atapi(4), cardbus(4), intro(4), wd(4), wdc(4)

HISTORY

     The njata device driver first appeared in NetBSD 4.0.

AUTHORS

     ITOH Yasufumi

BSD
								 September 7, 2006							       BSD

SCO