How to install UNIX 5.0.7 on an ML 330 G3 server with IDE array instead of scsi bus

10 More Discussions You Might Find Interesting

1. Red Hat

Scsi bus scan

Hi, I have presented a LUN to a VM (RHEL 5.8) and need to scan the scsi bus in order for the OS to pick it up. On FC attached hosts I can: echo "1" > /sys/class/fc_host/host0/issue_lip echo "- - -" > /sys/class/scsi_host/host0/scan ....but this does not work on my vm. ...

2. UNIX for Dummies Questions & Answers

Install SCSI Jaz drive in Sparc Solaris

I recently got a Sun Sparc 10 Ultra with Solaris 10 installed on it. Now I'm trying to connect my SCSI Jaz drive to it. I moved my Adaptec AHA-2940U PCI SCSI card from my XP PC (where it was working OK) to the Sun and that's about as far as I got. I did a probe-scsi-all and got nothing back,...

3. BSD

How to rescan scsi bus without reboot on OpenBSD

Hello, My question as title, I don't know the exact command, anyone could tell me about it? Kevin

4. Solaris

SCSI Bus Reset

hey guys i got this in my logs what does this mean:

5. UNIX and Linux Applications

How to install Nagios on Unix server

Hi all, i have install nagios on my Linux Centos 5 server and i want to install the agent on unit server to monitor it. I can monitor a linux and windows servers but still looking for a article on how to intall nagios on Unix server. Thanx in advance

6. UNIX for Dummies Questions & Answers

Not able to install Oracle Workgroup Server on SCO Unix 5.0.2 box

After having to replace a video card and having a corrupt root directory, I had to wipe out and reinstall my SCO OpenServer Enterprise System 5.0.2. because nothing would work for the root password. I am now trying to reinstall the Oracel Workgroup Server SCO v7.1.5.2 and it tells me I need to...

7. UNIX for Dummies Questions & Answers

How to know what program is install on Unix server?

I would like to know how to check what program is install on the Unix system? like the add/remove inside the control panel can show what program installed.

8. UNIX for Dummies Questions & Answers

SCSI bus is hung

Anyone have any ideas what could be causing me to get the error "The SCSI bus is hung. Perhaps an external device is turned off"? This is occuring when I try to boot off of my external CDROM. I have tried this CDROM on 3 different systems, tried different SCSI cables, and different terminators...

9. UNIX for Dummies Questions & Answers

The difference between SCSI & IDE Hard disks.

Hello agian ! What is the difference between SCSI and IDE hard disks ? I have Intel PC and when i check i have Generic IDE TYPE DISK0 is IDE hard disk is ok for Solrais ? or should i buy the SCSI hard disk ? Thanks Abid Malik

10. Filesystems, Disks and Memory

Change rootdev from SCSI to IDE

Hi, I have been attempting for the last few hours to change the root device to IDE from and SCSI adapter ... after modifying who knows how many files... (system still runs as long as the SCSI controller is present) ... as soon as I take it out, it gives me a panic, saying that rootdev cannot be...

LEARN ABOUT NETBSD

viaide

VIAIDE(4)						   BSD Kernel Interfaces Manual 						 VIAIDE(4)

NAME

     viaide -- AMD, NVIDIA and VIA IDE disk controllers driver

SYNOPSIS

     viaide* at pci? dev ? function ? flags 0x0000
     options PCIIDE_AMD756_ENABLEDMA

DESCRIPTION

     The viaide driver supports the following IDE controllers and provides the interface with the hardware for the ata driver:
	   -   Advanced Micro Devices AMD-756, 766, 768 and CS5536 IDE Controllers
	   -   NVIDIA nForce, nForce2, nForce2 400, nForce3, nForce3 250, nForce4, MCP04, MCP55, MCP61, MCP65, MCP67 IDE and SATA Controllers.
	   -   VIA Technologies VT82C586, VT82C586A, VT82C596A, VT82C686A, VT8233A, VT8235, VT8237/VT8237R IDE Controllers, VT6421 Serial RAID
	       Controller and CX700 IDE Controller.

     The 0x0002 flag forces the viaide driver to disable DMA on chipsets for which DMA would normally be enabled.  This can be used as a debugging
     aid, or to work around problems where the IDE controller is wired up to the system incorrectly.

SEE ALSO

     ata(4), atapi(4), intro(4), pci(4), pciide(4), wd(4), wdc(4)

NOTES

     Drives on the VT6421 Serial RAID Controller can only be accessed after they have been configured into RAID or JBOD sets via its BIOS.  It is
     also inaptly named as it has both SATA and PATA interfaces.

BUGS

     The AMD756 chip revision D2 has a bug affecting DMA (but not Ultra-DMA) modes.  The workaround documented by AMD is to not use DMA on any
     drive which does not support Ultra-DMA modes.  This does not appear to be necessary on all drives, the PCIIDE_AMD756_ENABLEDMA option can be
     used to force multiword DMA on the buggy revisions.  Multiword DMA can eventually be disabled on a per-drive basis with config flags, see
     wd(4).  The bug, if triggered, will cause a total system hang.

     The timings used for the PIO and DMA modes for controllers listed above are for a PCI bus running at 30 or 33 MHz.  This driver may not work
     properly on overclocked systems.

BSD
								  August 31, 2007							       BSD

SCO