Xorg(1) General Commands Manual Xorg(1)
Xorg - X11R7 X server
Xorg [:display] [option ...]
Xorg is a full featured X server that was originally designed for UNIX and UNIX-like operating systems running on Intel x86 hardware. It
now runs on a wider range of hardware and OS platforms.
This work was derived by the X.Org Foundation from the XFree86 Project's XFree86 4.4rc2 release. The XFree86 release was originally
derived from X386 1.2 by Thomas Roell which was contributed to X11R5 by Snitily Graphics Consulting Service.
Xorg operates under a wide range of operating systems and hardware platforms. The Intel x86 (IA32) architecture is the most widely sup-
ported hardware platform. Other hardware platforms include Compaq Alpha, Intel IA64, AMD64, SPARC and PowerPC. The most widely supported
operating systems are the free/OpenSource UNIX-like systems such as Linux, FreeBSD, NetBSD, OpenBSD, and Solaris. Commercial UNIX operat-
ing systems such as UnixWare are also supported. Other supported operating systems include GNU Hurd. Mac OS X is supported with the
Xquartz(1) X server. Win32/Cygwin is supported with the XWin(1) X server.
Xorg supports connections made using the following reliable byte-streams:
On most platforms, the "Local" connection type is a UNIX-domain socket. On some System V platforms, the "local" connection types also
include STREAMS pipes, named pipes, and some other mechanisms.
Xorg listens on port 6000+n, where n is the display number. This connection type can be disabled with the -nolisten option (see the
Xserver(1) man page for details).
For operating systems that support local connections other than Unix Domain sockets (SVR3 and SVR4), there is a compiled-in list specifying
the order in which local connections should be attempted. This list can be overridden by the XLOCAL environment variable described below.
If the display name indicates a best-choice connection should be made (e.g. :0.0), each connection mechanism is tried until a connection
succeeds or no more mechanisms are available. Note: for these OSs, the Unix Domain socket connection is treated differently from the other
local connection types. To use it the connection must be made to unix:0.0.
The XLOCAL environment variable should contain a list of one more more of the following:
which represent SVR4 Named Streams pipe, Old-style USL Streams pipe, SCO XSight Streams pipe, and ISC Streams pipe, respectively. You can
select a single mechanism (e.g. XLOCAL=NAMED), or an ordered list (e.g. XLOCAL="NAMED:PTS:SCO"). his variable overrides the compiled-in
defaults. For SVR4 it is recommended that NAMED be the first preference connection. The default setting is PTS:NAMED:ISC:SCO.
To globally override the compiled-in defaults, you should define (and export if using sh or ksh) XLOCAL globally. If you use startx(1) or
xinit(1), the definition should be at the top of your .xinitrc file. If you use xdm(1), the definitions should be early on in the
Xorg supports several mechanisms for supplying/obtaining configuration and run-time parameters: command line options, environment vari-
ables, the xorg.conf(5) configuration files, auto-detection, and fallback defaults. When the same information is supplied in more than one
way, the highest precedence mechanism is used. The list of mechanisms is ordered from highest precedence to lowest. Note that not all
parameters can be supplied via all methods. The available command line options and environment variables (and some defaults) are described
here and in the Xserver(1) manual page. Most configuration file parameters, with their defaults, are described in the xorg.conf(5) manual
page. Driver and module specific configuration parameters are described in the relevant driver or module manual page.
In addition to the normal server options described in the Xserver(1) manual page, Xorg accepts the following command line switches:
vtXX XX specifies the Virtual Terminal device number which Xorg will use. Without this option, Xorg will pick the first available Vir-
tual Terminal that it can locate. This option applies only to platforms that have virtual terminal support, such as Linux, BSD,
OpenSolaris, SVR3, and SVR4.
Allow the server to start up even if the mouse device can't be opened or initialised. This is equivalent to the AllowMouseOpenFail
xorg.conf(5) file option.
Make the VidMode extension available to remote clients. This allows the xvidtune client to connect from another host. This is
equivalent to the AllowNonLocalXvidtune xorg.conf(5) file option. By default non-local connections are not allowed.
Set the blue gamma correction. value must be between 0.1 and 10. The default is 1.0. Not all drivers support this. See also the
-gamma, -rgamma, and -ggamma options.
-bpp n No longer supported. Use -depth to set the color depth, and use -fbbpp if you really need to force a non-default framebuffer
(hardware) pixel format.
Read the server configuration from file. This option will work for any file when the server is run as root (i.e, with real-uid 0),
or for files relative to a directory in the config search path for all other users.
Read the server configuration files from directory. This option will work for any directory when the server is run as root (i.e,
with real-uid 0), or for directories relative to a directory in the config directory search path for all other users.
When this option is specified, the Xorg server loads all video driver modules, probes for available hardware, and writes out an
initial xorg.conf(5) file based on what was detected. This option currently has some problems on some platforms, but in most cases
it is a good way to bootstrap the configuration process. This option is only available when the server is run as root (i.e, with
SCO only. This is the same as the vt option, and is provided for compatibility with the native SCO X server.
Sets the default color depth. Legal values are 1, 4, 8, 15, 16, and 24. Not all drivers support all values.
Disable the parts of the VidMode extension (used by the xvidtune client) that can be used to change the video modes. This is
equivalent to the DisableVidModeExtension xorg.conf(5) file option.
Sets the number of framebuffer bits per pixel. You should only set this if you're sure it's necessary; normally the server can
deduce the correct value from -depth above. Useful if you want to run a depth 24 configuration with a 24 bpp framebuffer rather
than the (possibly default) 32 bpp framebuffer (or vice versa). Legal values are 1, 8, 16, 24, 32. Not all drivers support all
Swap the default values for the black and white pixels.
Set the gamma correction. value must be between 0.1 and 10. The default is 1.0. This value is applied equally to the R, G and B
values. Those values can be set independently with the -rgamma, -bgamma, and -ggamma options. Not all drivers support this.
Set the green gamma correction. value must be between 0.1 and 10. The default is 1.0. Not all drivers support this. See also
the -gamma, -rgamma, and -bgamma options.
The Xorg server checks the ABI revision levels of each module that it loads. It will normally refuse to load modules with ABI
revisions that are newer than the server's. This is because such modules might use interfaces that the server does not have. When
this option is specified, mismatches like this are downgraded from fatal errors to warnings. This option should be used with care.
Restrict device resets to the device at bus-id. The bus-id string has the form bustype:bus:device:function (e.g., 'PCI:1:0:0').
At present, only isolation of PCI devices is supported; i.e., this option is ignored if bustype is anything other than 'PCI'.
Prevent the server from detaching its initial controlling terminal. This option is only useful when debugging the server. Not all
platforms support (or can use) this option.
Use the xorg.conf(5) file InputDevice section called keyboard-name as the core keyboard. This option is ignored when the Layout
section specifies a core keyboard. In the absence of both a Layout section and this option, the first relevant InputDevice section
is used for the core keyboard.
Use the xorg.conf(5) file Layout section called layout-name. By default the first Layout section is used.
Use the file called filename as the Xorg server log file. The default log file is /var/log/Xorg.n.log on most platforms, where n
is the display number of the Xorg server. The default may be in a different directory on some platforms. This option is only
available when the server is run as root (i.e, with real-uid 0).
Sets the verbosity level for information printed to the Xorg server log file. If the n value isn't supplied, each occurrence of
this option increments the log file verbosity level. When the n value is supplied, the log file verbosity level is set to that
value. The default log file verbosity level is 3.
Set the module search path to searchpath. searchpath is a comma separated list of directories to search for Xorg server modules.
This option is only available when the server is run as root (i.e, with real-uid 0).
-nosilk Disable Silken Mouse support.
Disable the automatic switching on X server reset and shutdown to the VT that was active when the server started, if supported by
Set the internal pixmap format for depth 24 pixmaps to 24 bits per pixel. The default is usually 32 bits per pixel. There is nor-
mally little reason to use this option. Some client applications don't like this pixmap format, even though it is a perfectly
legal format. This is equivalent to the Pixmap xorg.conf(5) file option.
Set the internal pixmap format for depth 24 pixmaps to 32 bits per pixel. This is usually the default. This is equivalent to the
Pixmap xorg.conf(5) file option.
Use the xorg.conf(5) file InputDevice section called pointer-name as the core pointer. This option is ignored when the Layout sec-
tion specifies a core pointer. In the absence of both a Layout section and this option, the first relevant InputDevice section is
used for the core pointer.
-quiet Suppress most informational messages at startup. The verbosity level is set to zero.
Set the red gamma correction. value must be between 0.1 and 10. The default is 1.0. Not all drivers support this. See also the
-gamma, -bgamma, and -ggamma options.
Share virtual terminals with another X server, if supported by the OS.
Use the xorg.conf(5) file Screen section called screen-name. By default the screens referenced by the default Layout section are
used, or the first Screen section when there are no Layout sections.
This is the same as the -version option, and is included for compatibility reasons. It may be removed in a future release, so the
-version option should be used instead.
Print out the default module path the server was compiled with.
Print out the path libraries should be installed to.
For each driver module installed, print out the list of options and their argument types.
Set RGB weighting at 16 bpp. The default is 565. This applies only to those drivers which support 16 bpp.
Sets the verbosity level for information printed on stderr. If the n value isn't supplied, each occurrence of this option incre-
ments the verbosity level. When the n value is supplied, the verbosity level is set to that value. The default verbosity level is
Print out the server version, patchlevel, release date, the operating system/platform it was built on, and whether it includes mod-
ule loader support.
The Xorg server is normally configured to recognize various special combinations of key presses that instruct the server to perform some
action, rather than just sending the key press event to a client application. These actions depend on the XKB keymap loaded by a particular
keyboard device and may or may not be available on a given configuration.
The following key combinations are commonly part of the default XKEYBOARD keymap.
Immediately kills the server -- no questions asked. It can be disabled by setting the DontZap xorg.conf(5) file option to a TRUE
It should be noted that zapping is triggered by the Terminate_Server action in the keyboard map. This action is not part of the
default keymaps but can be enabled with the XKB option "terminate:ctrl_alt_bksp".
Change video mode to next one specified in the configuration file. This can be disabled with the DontZoom xorg.conf(5) file
Change video mode to previous one specified in the configuration file. This can be disabled with the DontZoom xorg.conf(5) file
For systems with virtual terminal support, these keystroke combinations are used to switch to virtual terminals 1 through 12,
respectively. This can be disabled with the DontVTSwitch xorg.conf(5) file option.
Xorg typically uses a configuration file called xorg.conf and configuration files with the suffix .conf in a directory called xorg.conf.d
for its initial setup. Refer to the xorg.conf(5) manual page for information about the format of this file.
Xorg has a mechanism for automatically generating a built-in configuration at run-time when no xorg.conf file or xorg.conf.d files are
present. The current version of this automatic configuration mechanism works in two ways.
The first is via enhancements that have made many components of the xorg.conf file optional. This means that information that can be
probed or reasonably deduced doesn't need to be specified explicitly, greatly reducing the amount of built-in configuration information
that needs to be generated at run-time.
The second is to have "safe" fallbacks for most configuration information. This maximises the likelihood that the Xorg server will start
up in some usable configuration even when information about the specific hardware is not available.
The automatic configuration support for Xorg is work in progress. It is currently aimed at the most popular hardware and software plat-
forms supported by Xorg. Enhancements are planned for future releases.
The Xorg server config files can be found in a range of locations. These are documented fully in the xorg.conf(5) manual page. The most
commonly used locations are shown here.
/etc/X11/xorg.conf Server configuration file.
/etc/X11/xorg.conf-4 Server configuration file.
/etc/xorg.conf Server configuration file.
/usr/etc/xorg.conf Server configuration file.
/usr/lib/X11/xorg.conf Server configuration file.
/etc/X11/xorg.conf.d Server configuration directory.
/etc/X11/xorg.conf.d-4 Server configuration directory.
/etc/xorg.conf.d Server configuration directory.
/usr/etc/xorg.conf.d Server configuration directory.
/usr/lib/X11/xorg.conf.d Server configuration directory.
/var/log/Xorg.n.log Server log file for display n.
/usr/bin/* Client binaries.
/usr/include/* Header files.
/usr/share/X11/XErrorDB Client error message database.
/usr/lib/X11/app-defaults/* Client resource specifications.
/usr/share/man/man?/* Manual pages.
/etc/Xn.hosts Initial access control list for display n.
X(7), Xserver(1), xdm(1), xinit(1), xorg.conf(5), xvidtune(1), xkeyboard-config (7), apm(4), ati(4), chips(4), cirrus(4), cyrix(4),
fbdev(4), glide(4), glint(4), i128(4), i740(4), imstt(4), intel(4), mga(4), neomagic(4), nsc(4), nv(4), openchrome (4), r128(4), rendi-
tion(4), s3virge(4), siliconmotion(4), sis(4), sunbw2(4), suncg14(4), suncg3(4), suncg6(4), sunffb(4), sunleo(4), suntcx(4), tdfx(4),
tga(4), trident(4), tseng(4), v4l(4), vesa(4), vmware(4),
Web site <http://www.x.org>.
Xorg has many contributors world wide. The names of most of them can be found in the documentation, ChangeLog files in the source tree,
and in the actual source code.
Xorg was originally based on XFree86 4.4rc2. That was originally based on X386 1.2 by Thomas Roell, which was contributed to the then X
Consortium's X11R5 distribution by SGCS.
Xorg is released by the X.Org Foundation.
The project that became XFree86 was originally founded in 1992 by David Dawes, Glenn Lai, Jim Tsillas and David Wexelblat.
XFree86 was later integrated in the then X Consortium's X11R6 release by a group of dedicated XFree86 developers, including the following:
Stuart Anderson firstname.lastname@example.org
Doug Anson email@example.com
Gertjan Akkerman firstname.lastname@example.org
Mike Bernson email@example.com
Robin Cutshaw robin@XFree86.org
David Dawes dawes@XFree86.org
Marc Evans marc@XFree86.org
Pascal Haible firstname.lastname@example.org
Matthieu Herrb Matthieu.Herrb@laas.fr
Dirk Hohndel hohndel@XFree86.org
David Holland email@example.com
Alan Hourihane firstname.lastname@example.org
Jeffrey Hsu email@example.com
Glenn Lai firstname.lastname@example.org
Ted Lemon email@example.com
Rich Murphey rich@XFree86.org
Hans Nasten firstname.lastname@example.org
Mark Snitily email@example.com
Randy Terbush firstname.lastname@example.org
Jon Tombs tombs@XFree86.org
Kees Verstoep email@example.com
Paul Vixie firstname.lastname@example.org
Mark Weaver Mark_Weaver@brown.edu
David Wexelblat dwex@XFree86.org
Philip Wheatley Philip.Wheatley@ColumbiaSC.NCR.COM
Thomas Wolfram email@example.com
Orest Zborowski firstname.lastname@example.org
Xorg source is available from the FTP server <ftp://ftp.x.org/>, and from the X.Org server <http://gitweb.freedesktop.org/>. Documentation
and other information can be found from the X.Org web site <http://www.x.org/>.
Xorg is copyright software, provided under licenses that permit modification and redistribution in source and binary form without fee.
Xorg is copyright by numerous authors and contributors from around the world. Licensing information can be found at <http://www.x.org>.
Refer to the source code for specific copyright notices.
XFree86(TM) is a trademark of The XFree86 Project, Inc.
X11(TM) and X Window System(TM) are trademarks of The Open Group.
X Version 11 xorg-server 1.12.4 Xorg(1)