siisata(4) [netbsd man page]

SIISATA(4)						   BSD Kernel Interfaces Manual 						SIISATA(4)

NAME

     siisata -- Silicon Image SATA-II controllers driver

SYNOPSIS

     siisata* at pci? dev ? function ?
     siisata* at cardbus? function ?

DESCRIPTION

     The siisata driver supports the Silicon Image SteelVine family of SATA-II controllers, interfacing the hardware with the ata(4) and atapi(4)
     subsystems.

     The following controllers are supported by the siisata driver:

	   Silicon Image SiI3124 4-port PCI/PCI-X
	   Silicon Image SiI3132 2-port PCI-Express x1
	   Silicon Image SiI3531 1-port PCI-Express x1

SEE ALSO

     ata(4), atapi(4), cardbus(4), pci(4), wd(4)

HISTORY

     The siisata driver first appeared in NetBSD 5.0.

AUTHORS

     The siisata driver was written by Jonathan A. Kollasch <jakllsch@kollasch.net>.

BUGS

     SATA Native Command Queuing is not yet supported.
     Device hot swapping is not yet supported.
     Silicon Image's Software RAID is not yet supported by the
	     ataraid(4) driver.  raid(4) can be used instead.

BSD
								   July 19, 2009							       BSD

JMIDE(4)						   BSD Kernel Interfaces Manual 						  JMIDE(4)

NAME

     jmide -- JMicron Technology JMB36x PCIe to SATA II/PATA controller driver

SYNOPSIS

     jmide* at pci? dev ? function ? flags 0x0000
     ahcisata* at jmide?

DESCRIPTION

     The jmide driver supports the JMicron Technology JMB36x IDE controllers.

     These PCI-e controllers exist in different flavors (1 or 2 PATA Ultra/133 ports and/or 1 or 2 SATA-II ports), and are highly flexible.  The
     SATA ports can be attached to the integrated AHCI controller or attached to the PCI IDE channels in PATA emulation, in either single-drive
     emulation on each PCI IDE channels, or in master/slave emulation on one of the PCI IDE channels.

     When enabled, the AHCI controller can either be on the PCI function 0 or function 2.  The PCI IDE controller can also be on either PCI func-
     tion, and can share the PCI function with AHCI.  The jmide driver supports both the AHCI controller and PCI IDE controller in various config-
     urations.

SEE ALSO

     ahcisata(4), ata(4), atapi(4), intro(4), pci(4), pciide(4), wd(4), wdc(4)

AUTHORS

     The jmide driver was written by Manuel Bouyer.

BSD
								   July 2, 2007 							       BSD