CentOS 7.0 - man page for scdaemon (centos section 1)

Linux & Unix Commands - Search Man Pages

Man Page or Keyword Search:   man
Select Man Page Set:       apropos Keyword Search (sections above)

SCDAEMON(1)				GNU Privacy Guard			      SCDAEMON(1)

       scdaemon - Smartcard daemon for the GnuPG system

       scdaemon [--homedir dir] [--options file] [options] --server
       scdaemon [--homedir dir] [--options file] [options] --daemon [command_line]

       The  scdaemon is a daemon to manage smartcards.	It is usually invoked by gpg-agent and in
       general not used directly.

       Commands are not distinguished from options except for the fact that only one  command  is

	      Print  the  program version and licensing information.  Not that you can abbreviate
	      this command.

       --help, -h
	      Print a usage message summarizing the most useful command-line options.	Not  that
	      you can abbreviate this command.

	      Print  a	list  of all available options and commands.  Not that you can abbreviate
	      this command.

	      Run in server mode and wait for commands on the stdin.  This is default mode is  to
	      create a socket and listen for commands there.

	      Run  in  server mode and wait for commands on the stdin as well as on an additional
	      Unix Domain socket.  The server command GETINFO may be used to get the name of that
	      extra socket.

	      Run  the	program  in  the  background.  This option is required to prevent it from
	      being accidentally running in the background.

       --options file
	      Reads configuration from file instead of from the  default  per-user  configuration
	      file.   The default configuration file is named 'scdaemon.conf' and expected in the
	      '.gnupg' directory directly below the home directory of the user.

       --homedir dir
	      Set the name of the home directory to dir. If this option is  not  used,	the  home
	      directory  defaults to '~/.gnupg'.  It is only recognized when given on the command
	      line.  It also overrides any home directory stated through the environment variable
	      'GNUPGHOME'  or  (on  W32  systems)  by  means  of  the  Registry  entry HKCU\Soft-


	      Outputs additional information while running.  You can increase  the  verbosity  by
	      giving several verbose commands to gpgsm, such as '-vv'.

       --debug-level level
	      Select the debug level for investigating problems.  level may be a numeric value or
	      a keyword:

	      none   No debugging at all.  A value of less than 1 may be used instead of the key-

	      basic  Some  basic  debug messages.  A value between 1 and 2 may be used instead of
		     the keyword.

		     More verbose debug messages.  A value between 3 and 5 may be used instead of
		     the keyword.

	      expert Even more detailed messages.  A value between 6 and 8 may be used instead of
		     the keyword.

	      guru   All of the debug messages you can get. A value greater than 8  may  be  used
		     instead  of the keyword.  The creation of hash tracing files is only enabled
		     if the keyword is used.

       How these messages are mapped to the actual debugging  flags  is  not  specified  and  may
       change  with  newer  releases of this program. They are however carefully selected to best
       aid in debugging.

	      All debugging options are subject to change and thus should  not	be  used  by  any
	      application  program.   As  the  name  says, they are only used as helpers to debug

       --debug flags
	      This option is only useful for debugging and the behaviour may change at	any  time
	      without notice.  FLAGS are bit encoded and may be given in usual C-Syntax. The cur-
	      rently defined bits are:

	      0 (1)  command I/O

	      1 (2)  values of big number integers

	      2 (4)  low level crypto operations

	      5 (32) memory allocation

	      6 (64) caching

	      7 (128)
		     show memory statistics.

	      9 (512)
		     write hashed data to files named dbgmd-000*

	      10 (1024)
		     trace Assuan protocol.  See also option --debug-assuan-log-cats.

	      11 (2048)
		     trace APDU I/O to the card.  This may reveal sensitive data.

	      12 (4096)
		     trace some card reader related function calls.

	      Same as --debug=0xffffffff

       --debug-wait n
	      When running in server mode, wait n seconds before entering the  actual  processing
	      loop and print the pid.  This gives time to attach a debugger.

	      Enable  debug  output  from  the	included  CCID driver for smartcards.  Using this
	      option twice will also enable some tracing of the T=1  protocol.	 Note  that  this
	      option may reveal sensitive data.

	      This option disables all ticker functions like checking for card insertions.

	      For  security  reasons  we  won't  create a core dump when the process aborts.  For
	      debugging purposes it is sometimes better to allow core dump.  This options enables
	      it and also changes the working directory to '/tmp' when running in --server mode.

	      This option appends a thread ID to the PID in the log output.

       --debug-assuan-log-cats cats
	      Changes  the active Libassuan logging categories to cats.  The value for cats is an
	      unsigned integer given in usual C-Syntax.  A value of of 0 switches  to  a  default
	      category.  If this option is not used the categories are taken from the environment
	      variable 'ASSUAN_DEBUG'.	Note that this option has only an effect  if  the  Assuan
	      debug flag has also been with the option --debug.  For a list of categories see the
	      Libassuan manual.

	      Don't detach the process from the console.  This is mainly useful for debugging.

       --log-file file
	      Append all logging output to file.  This is very helpful in seeing what  the  agent
	      actually does.

       --pcsc-driver library
	      Use  library  to	access	the  smartcard	reader.   The  current default is 'libpc-
	      sclite.so'.  Instead of using this option you might also want to install a symbolic
	      link to the default file name (e.g. from 'libpcsclite.so.1').

       --ctapi-driver library
	      Use  library  to	access	the  smartcard	reader.   The current default is 'libtow-
	      itoko.so'.  Note that the use of this interface is deprecated; it may be removed in
	      future releases.

	      Disable  the  integrated	support  for CCID compliant readers.  This allows to fall
	      back to one of the other drivers even if the internal CCID driver  can  handle  the
	      reader.  Note, that CCID support is only available if libusb was available at build

       --reader-port number_or_string
	      This option may be used to specify the port of the card terminal.   A  value  of	0
	      refers to the first serial device; add 32768 to access USB devices.  The default is
	      32768 (first USB device).  PC/SC or CCID readers might need a string here; run  the
	      program  in  verbose  mode to get a list of available readers.  The default is then
	      the first reader found.

	      To get a list of available CCID readers you may use this command:
	 echo scd getinfo reader_list | gpg-connect-agent --decode | awk '/^D/ {print $2}'

       --card-timeout n
	      If n is not 0 and no client is actively using the card, the card	will  be  powered
	      down after n seconds.  Powering down the card avoids a potential risk of damaging a
	      card when used with certain cheap readers.  This also  allows  non  Scdaemon  aware
	      applications  to access the card.  The disadvantage of using a card timeout is that
	      accessing the card takes longer and that the user needs  to  enter  the  PIN  again
	      after the next power up.

	      Note that with the current version of Scdaemon the card is powered down immediately
	      at the next timer tick for any value of n other than 0.

	      Please specify this option when the card reader supports variable length input  for
	      pinpad  (default	is  no).  For known readers (listed in ccid-driver.c and apdu.c),
	      this option is not needed.  Note that if your card reader doesn't supports variable
	      length  input  but  you  want to use it, you need to specify your pinpad request on
	      your card.

	      Even if a card reader features a pinpad, do not try to use it.

	      This option disables the use of admin class commands for	card  applications  where
	      this  is supported.  Currently we support it for the OpenPGP card. This commands is
	      useful to inhibit accidental access to admin class command which	could  ultimately
	      lock  the  card  through	wrong  PIN  numbers.  Note that GnuPG versions older than
	      2.0.11 featured an --allow-admin command which was required to use such admin  com-
	      mands.   This  option  has no more effect today because the default is now to allow
	      admin commands.

       --disable-application name
	      This option disables the use of the card application named name.	 This  is  mainly
	      useful  for  debugging  or  if  a application with lower priority should be used by

	      All the long options may also be given in the configuration  file  after	stripping
	      off the two leading dashes.

       scdaemon supports the card applications as described below.

   The OpenPGP card application ``openpgp''

       This  application  is  currently  only  used  by gpg but may in future also be useful with
       gpgsm.  Version 1 and version 2 of the card is supported.

       The specifications for these  cards  are  available  at	(http://g10code.com/docs/openpgp-
       card-1.0.pdf) and (http://g10code.com/docs/openpgp-card-2.0.pdf).

   The Telesec NetKey card ``nks''

       This is the main application of the Telesec cards as available in Germany.  It is a super-
       set of the German DINSIG card.  The card is used by gpgsm.

   The DINSIG card application ``dinsig''

       This is an application as described in the German draft standard DIN  V	66291-1.   It  is
       intended  to be used by cards supporting the German signature law and its bylaws (SigG and

   The PKCS#15 card application ``p15''

       This is common framework for smart card applications.  It is used by gpgsm.

   The Geldkarte card application ``geldkarte''

       This is a simple application to display information of a German Geldkarte.  The	Geldkarte
       is a small amount debit card application which comes with almost all German banking cards.

   The Undefined card application ``undefined''

       This  is  a  stub  application  to  allow the use of the APDU command even if no supported
       application is found on the card.  This application is not used automatically but must  be
       explicitly requested using the SERIALNO command.

	 $ scdaemon --server -v

       There  are  a few configuration files to control certain aspects of scdaemons's operation.
       Unless noted, they are expected in the current home directory (see: [option --homedir]).

	      This is the standard configuration file read by scdaemon on startup.  It	may  con-
	      tain  any  valid	long  option;  the  leading two dashes may not be entered and the
	      option may not be abbreviated.  This default name may be	changed  on  the  command
	      line (see: [option --options]).

	      If  this	file  is present and executable, it will be called on veyer card reader's
	      status changed. An example of this script is provided with the distribution

	      This file is created by sdaemon to let other applications now about  reader  status
	      changes.	Its use is now deprecated in favor of 'scd-event'.

       gpg-agent(1), gpgsm(1), gpg2(1)

       The  full documentation for this tool is maintained as a Texinfo manual.  If GnuPG and the
       info program are properly installed at your site, the command

	 info gnupg

       should give you access to the complete manual including a menu structure and an index.

GnuPG 2.0.22				    2014-06-10				      SCDAEMON(1)
Unix & Linux Commands & Man Pages : ©2000 - 2018 Unix and Linux Forums

All times are GMT -4. The time now is 02:37 PM.

Unix & Linux Forums Content Copyright©1993-2018. All Rights Reserved.
Show Password

Not a Forum Member?
Forgot Password?