Location: Asia Pacific, Cyberspace, in the Dark Dystopia
Posts: 19,118
Thanks Given: 2,351
Thanked 3,359 Times in 1,878 Posts
32MB USB Memory Stack Not Supported on Android?
Running latest Android for Galaxy Tab 8.9 and bought a 32GB USB flash memory stick for file transfers, etc. Would not work. Searched the net for clues and could not find any. Then, back at the IT store, found out that Galaxy Tab currently only supports up to 16GB for the USD flash memory stick.
Does anyone know if this is an Android limitation based on the current OS, or is the limited tied to some other parameter like available internal memory?
Seems to be that the available memory does not matter; and the issue is that 32GB is not yet supported by Android (for these USB memory sticks).
I have a java process that piles up the stack memory.
ulimit -a
core file size (blocks, -c) unlimited
data seg size (kbytes, -d) unlimited
file size (blocks, -f) unlimited
open files (-n) 1024
pipe size (512 bytes, -p) 10
stack size ... (9 Replies)
I'm trying to get a MacBook Air (MBA) running 10.6.5 to recognize a Samsung Galaxy S (Android 2.2) vis the USB interface for simple file transfers back and forth. Nothing works so far. I've tried many things! :wall:
I noticed when I connect my phone to the MBA, there is a message in system.log... (2 Replies)
I need to upgrade the memory configuration on our T2000s to 24 Gb. I presently have 8x2Gb DIMMS in Rank 0 and 8x1Gb DIMMS in Rank 1, but the OS only recognizes 16Gb. How can I upgrade these T2000s to 24Gb? (2 Replies)
My name is Patrik Mark.S . i am using the Vxworks 653 OS with HPCNET Board with 8641D processor, Since there is no USB Host Stack in Vxworks 653 so i am tring to port UsbHost Stack onto vxworks 653. at the lowest layer(HCD Layer) of usb Host stack i need usbPciStub.c File related to my Board... (1 Reply)
I just got a removable memory card. I tried the following bu still my OS solaris x86 cannot detect it and also i got an error
touch /reconfigure
init 0
I inserted the removable memory card and the powered the system on
I got the following on at boot up
when i fully logged in I did ... (2 Replies)
Hi,
Can anyone suggest me any USB Hard Disk Drive which I can connect to Sun Fire V890 and take backup at a quick speed. A test with SolidState USB Hard Drive for backup work was taking writing at 2GB per hour for a 75GB backup.
Regards,
Tushar Kathe (1 Reply)
I'm trying to set up a RELIABLE backup routine using several USB memory sticks on a SCO 6 Server.
Does anybody have any experience of how to do this? I presume I have to mount the memory stick, copy the files to it & then unmount the stick so that another memory stick could be used for the next... (5 Replies)
Hello everbody:
when issuing the ulimit -a, on my tru64 machone, I get the following:
root@billing4# ulimit -a
time(seconds) unlimited
file(blocks) unlimited
data(kbytes) 10485760
stack(kbytes) 32768
memory(kbytes) 10190528
coredump(blocks) 0... (1 Reply)
Hi, I am writing a C program under SCO Unix. I have a memory stack problem but do not know how to go about fixing it. I have tried running INSURE but that does not detect any problems.
Essentially the problem is that the memory address shifts on return from a routine. I pass a pointer to... (3 Replies)
sane-find-scanner(1) General Commands Manual sane-find-scanner(1)NAME
sane-find-scanner - find SCSI and USB scanners and their device files
SYNOPSIS
sane-find-scanner [-h|-?] [-v] [-q] [-f] [devname]
DESCRIPTION
sane-find-scanner is a command-line tool to find SCSI and some USB scanners and determine their Unix device files. It's part of the sane-
backends package.
For SCSI scanners, it checks the default generic SCSI device files (e.g., /dev/sg0) and /dev/scanner. The test is done by sending a SCSI
inquiry command and looking for a device type of "scanner" or "processor" (some old HP scanners seem to send "processor"). So sane-find-
scanner will find any SCSI scanner connected to those default device files even if it isn't supported by any SANE backend.
For USB scanners, first the USB kernel scanner device files (e.g. /dev/usb/scanner0), /dev/usb/scanner, and /dev/usbscanner are tested. The
files are opened and the vendor and device ids are determined if the operating system supports this feature. Currently USB scanners are
only found this way if they are supported by the Linux scanner module or the FreeBSD or OpenBSD uscanner driver. After that test, sane-
find-scanner tries to scan for USB devices found by the USB library libusb (if available). There is no special USB class for scanners, so
the heuristics used to distinguish scanners from other USB devices is not perfect. sane-find-scanner will even find USB scanners, that are
not supported by any SANE backend.
sane-find-scanner won't find parallel port scanners, or scanners connected to proprietary ports.
OPTIONS -h, -? Prints a short usage message.
-v Verbose output. If used once, sane-find-scanner shows every device name and the test result. If used twice, SCSI inquiry informa-
tion and the USB device descriptors are also printed.
-q Be quiet. Print only the devices, no comments.
-f Force opening all explicitely given devices as SCSI and USB devices. That's useful if sane-find-scanner is wrong in determing the
device type.
devname Test device file "devname". No other devices are checked if devname is given.
EXAMPLE
sane-find-scanner -v
Check all SCSI and USB devices for available scanners and print a line for every device file.
sane-find-scanner /dev/scanner
Look for a (SCSI) scanner only at /dev/scanner and print the result.
SEE ALSO sane(7), sane-scsi(5), sane-usb(5), scanimage(1), xscanimage(1), xsane(1), sane-"backendname"(5)
AUTHOR
Oliver Rauch, Henning Meier-Geinitz and others
SUPPORTED PLATFORMS
USB support is limited to Linux (kernel, libusb), FreeBSD (kernel, libusb), NetBSD (libusb), OpenBSD (kernel, libusb). Detecting the vendor
and device ids only works with Linux or libusb.
SCSI support is available on Irix, EMX, Linux, Next, AIX, Solaris, FreeBSD, NetBSD, OpenBSD, and HP-UX.
BUGS
No support for parallel port scanners yet.
15 Sep 2002 sane-find-scanner(1)