HDD not detected by RHL 9 (or 7.2) Post: 92577

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

Dual booted RHL 7.3 with Win XP..

Hello all, I'm a no Linux expert! But I perfectly dual booted Win XP with RHL 7.3 on a hp pavilion notebook (model ze5170). All working fantastic now. But I have a minor problem now. I can't get RHL probe the modem, so could not get the internet connection working. The modem is a Conexant...

2. UNIX for Dummies Questions & Answers

External Modem for RHL 7.3...

Another stupid question... and I can only hope someone can spend a little time answering it... So thats it. I went thru the documentation out there at linmodems.org, trie this and that... read thru this post https://www.unix.com/showthread.php?s=&threadid=1787 on my favorite forums. And...

3. UNIX for Dummies Questions & Answers

Old HDD copy to new HDD ? im lost...

Over the last few months the HDD spins louder and louder, so I fiqured its time to replace the HDD. Its been running 24/7/365 since 98 :eek:. yes i said since 98 :D I have an IBM system 43P Model 240. 233 MHz. running AIX Version 4. The current HDD is an IBM DGHS COMP IEC -950 FRU PN#...

4. Solaris

OS is not detected CPU and memory

Hi, Server AIBVRFCC failed POST while booting on 06/28/2009. Server is up, but OS cannot see two CPUs (CPU 0 and CPU 2) and half of the installed system memory (8 GB is physically installed but only 4 GB is seen by OS now). bld00016:root psrinfo 1 on-line since 06/28/09 05:51:36 3 on-line...

5. Programming

stack smashing detected

Like you can see in the title this is my problem! Here is what appears in the terminal :confused::confused::confused: *** stack smashing detected ***: ./a.out terminated ======= Backtrace: ========= /lib/tls/i686/cmov/libc.so.6(__fortify_fail+0x48)...

6. Hardware

iPhone Not being detected

I'm New to the linux world I'm running OpenSuse and as soon as I installed everything was wokring like a charm. and i said to myself I'm so keeping this OpSys! everytime i would plug in my iPhone it would read it as anything else as a filesystem and i was able to go through the device files an etc,...

7. Linux

Local NTP on RHL

Hi I have an offline system, no access to the internet. It has a number of windows vms as well as some physical Red hat linux servers. I would like to one of the linux servers as a NTP server, so its local time is used as the reference point for all the other vms. How do I do this. Most of the...

8. Solaris

No memory detected in Bank 3

Hi. Recently I discovered how to access the 'ok' prompt on my E450. (Thanks DukeNuke2) And so I've been running tests, checking the system out... (since until now I've not known how to get to the 'ok' prompt) And came across 0>INFO: No memory detected in Bank 3 and *** Missing DIMM(s)... as...

9. UNIX for Dummies Questions & Answers

Help needed - RHL

Hi, have been given a dell server with redhat linux installed , in my new company on my desk , have not worked much on linux. Was also given a static IP. I dont have a console, but a monitor, that I switch between my desktop and this server. yesterday I wanted to change IP of the server...

10. AIX

IBM AIX Internal HDD vs SAN HDD and Oracle

Hi Folks, I am facing an issue with the performance. P4 with 1 processor and 16 GB RAM and SAN HDD = Oracle report takes 25 minutes P5 with 2 processors and 16 GB RAM internall HDD with LPAR = Oracle Report takes 1 hour 15 minutes ( please note I have assigned all the max processors and...

LEARN ABOUT NETBSD

jmide

JMIDE(4)						   BSD Kernel Interfaces Manual 						  JMIDE(4)

NAME

     jmide -- JMicron Technology JMB36x PCIe to SATA II/PATA controller driver

SYNOPSIS

     jmide* at pci? dev ? function ? flags 0x0000
     ahcisata* at jmide?

DESCRIPTION

     The jmide driver supports the JMicron Technology JMB36x IDE controllers.

     These PCI-e controllers exist in different flavors (1 or 2 PATA Ultra/133 ports and/or 1 or 2 SATA-II ports), and are highly flexible.  The
     SATA ports can be attached to the integrated AHCI controller or attached to the PCI IDE channels in PATA emulation, in either single-drive
     emulation on each PCI IDE channels, or in master/slave emulation on one of the PCI IDE channels.

     When enabled, the AHCI controller can either be on the PCI function 0 or function 2.  The PCI IDE controller can also be on either PCI func-
     tion, and can share the PCI function with AHCI.  The jmide driver supports both the AHCI controller and PCI IDE controller in various config-
     urations.

SEE ALSO

     ahcisata(4), ata(4), atapi(4), intro(4), pci(4), pciide(4), wd(4), wdc(4)

AUTHORS

     The jmide driver was written by Manuel Bouyer.

BSD
								   July 2, 2007 							       BSD