Configuring networking interfaces on Solaris 10 Post: 87851

9 More Discussions You Might Find Interesting

1. IP Networking

networking between two solaris workstations

I am trying to network two solaris workstations(ultra sparc 5) at home. what shoud I use to build the one of workstations as a http and ftp server and to network with the other workstation? (please explain to me in detail.. what kind of software or equipment do I need..) Thanks John

2. UNIX for Dummies Questions & Answers

adding interfaces in solaris 9

Hi, Have a solaris 9 e420, one onboard nic. Now I added a quad nic card. I have never had more than a single interface. Any help on setting this new card up? or links? PLease? ; thanks!

3. UNIX for Dummies Questions & Answers

Configuring networking interface on Sun Blade 1500

Hi, I am attempting to configure my ethernet interface on a Sun Blade 1500. I am testing out my network interface my connecting a crossover cable from my blade to a windows box. I would like to assign an ip address of 10.0.0.2 to "bge0" and netmask of "255.0.0.0". I have typed the following: ...

4. Solaris

solaris networking

may i know what is the command for configure new ip, subnet mask and gateway ?? thanks ..

5. Solaris

Solaris 10 Networking

I have just installed Solaris 10 for x86. The install seemed to have worked fine, and I have configured my hostname and am able to login and do whatever. However, networking does not seem to have been installed. I have a router which assigns ip address via DHCP. I would have thought Solaris would...

6. IP Networking

Solaris Networking - help

Hi all Right, i need to admit Im c4p on networking. I hate it, always have, always will. Here's my problem Ive got 3 hosts. A B and C. I need to directly contact host C from host A, but at the moment I have to ssh on to B, to then ssh on to C. so, I need to set up host b, to forward...

7. Solaris

Solaris networking

Hi, I have installed two solaris boxes in an VM. First box is 10-1 Has two interfaces and in connected briged to the lan an d connected internal to an virtual lan. Second box is 10-2 Has one interface. Now what I wanted to do is a setup so that 10-2 connects through 10-1 to the lan....

8. Solaris

Solaris 8: Multiple primary interfaces connected to the same network

Hello, I have a machine with Solaris 8, and it has multiple interfaces that are connected to the same network which means they all have metric 0 (1 hop) to the default gateway. assume: * e1000g0: 10.1.1.70 * e1000g2: 10.1.1.72 * e1000g4: 10.1.1.74 * e1000g5: 10.1.1.76 * gateway:...

9. Solaris

Configuring network interfaces in Solaris11

Hi all, Just istalled Solaris 11. Want to configure network interfaces and got some problems: #dladm show-phys # #dladm show-link # If i run ifconfig -a, i am getting 2 lo0 (loopback) interfaces and thats all. I can't enable interface, can't list it, can't assign IP to it. Can...

LEARN ABOUT MINIX

ifconfig

IFCONFIG(8)						      System Manager's Manual						       IFCONFIG(8)

NAME

       ifconfig - configure a TCP/IP device

SYNOPSIS

       ifconfig [-I ip-device] [-h ipaddr] [-n netmask] [-iv]

DESCRIPTION

       Ifconfig  initializes a TCP/IP device setting the IP address and/or netmask.  It will report the address and netmask set.  This command may
       be used if the system has not been configured properly yet.  It is only used at boot time to set a fixed address for  a	system	without  a
       physical ethernet.  Normally the inet task will find it out by itself from the RARP server.

OPTIONS

       -h     The decimal TCP/IP address to set.

       -n     The netmask to set.

       -i     Don't set the IP address or netmask if already set.  This way ifconfig cannot interfere if the numbers have been found out by RARP.

       -v     Report IP address and netmask.  This is the default action if there are no other options.

SEE ALSO

       hostaddr(1), rarpd(8), set_net_default(8), boot(8).

AUTHOR

       Kees J. Bot (kjb@cs.vu.nl)

																       IFCONFIG(8)