01-12-2001
One of my friends helped me get started solving the problem but he doesn't know much more than this...
Looks like at least part of the problem is the config for the network card - it didn't seem to have one.
We're running Solaris 2.6
Running ifconfig -a showed:
hme0: flags=842 <BROADCAST, RUNNING, MULTICAST> mta 1500
inet 0.0.0.0 netmask 0
ether 8:0:20:b8:fe:ca
I ran ifconfig hme0 192.168.22.2 netmask 255.255.255.0
followed by
ifconfig hme0 down
ifconfig hme0 up
and ifconfig -a now showed:
hme0: flags=842 <UP, BROADCAST, RUNNING, MULTICAST> mta 1500
inet 192.168.22.2 netmask ffffff00
I then set the default route with:
route add default 192.168.22.15
I could now see it on the network (ping)
Unfortunately the services that relied on the network card working weren't running so I decided to restart the machine:
Shutdown now
blah, blah...
Enter run level (0-6, s or S) I had no idea but my friend seemed to think it was 5 so we went with that.
After it shutdown and was turned back on I saw the following error at boot up:
configuring network interfaces: ifconfig: rolsyd10: bad address hme0
...
add net default: gateway 192.168.22.15: Network is unreachable
And again the other messages started to appear - I think these messages were probably there before I just didn't know what to look for...
Anways that's as far as I've got - I've got to go home now... Next on the list is to try and edit the hosts file...
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
I have to setup a new server (linux) and I have to copy the data from the old unix system to the new one.
Can I access the unix data in dos?
Please help. I know little about linux and unix (3 Replies)
Discussion started by: steven5046
3 Replies
2. Shell Programming and Scripting
Hi
I have a question, what is the purpose of this command and what will it do
"refresh -s inetd"
Thanks in Advance
Swaraj (3 Replies)
Discussion started by: kswaraj
3 Replies
3. UNIX for Dummies Questions & Answers
Hi ,
i have jus started learning basics of unix .I have few queries :
1) what is meant by unix box server?
2) what is the difference between unix and linux (is it jus x-windows graphical system or is there anything more than that?)
3) Can i get any free download of unix so that i cud... (7 Replies)
Discussion started by: vivekshankar
7 Replies
4. Shell Programming and Scripting
I am very new to Unix so please bear with me! I am trying to write a script that will compare file creation time with the current time so I can be notified if a file is more than an hour old. Can anybody point me in the right direction on this???
Thank you in advance for any help!!! It is GREATLY... (4 Replies)
Discussion started by: danedder
4 Replies
5. Shell Programming and Scripting
I am writing a shell script and I am calling wc -l. I need to assign the results of this call to a varaible and it's not working the way I think it should:
xx= wc -l $1
What am I doing wrong?
Thanx (1 Reply)
Discussion started by: dortoh
1 Replies
6. UNIX for Dummies Questions & Answers
Hi,
Does anyone know how to make BASH provide a list of possible completions on the first tab, and then start cycling through the possibilites on the next tab?
Right now this is what I have in my .bashrc:
bind "set show-all-if-ambiguous on"
bind \\C-o:menu-complete
This allows... (0 Replies)
Discussion started by: Mithu
0 Replies
7. UNIX for Dummies Questions & Answers
hi,
is it ok for more than one inetd daemon running at a time?
if not okay, possible to kill the rest and make only one daemon running?
i understand that inetd is a process that enables tcp connections from external sources...kindly advise more on inetd...thanks alot..Happy New Year!:) (2 Replies)
Discussion started by: cromohawk
2 Replies
8. Solaris
Hi All,
When i am trying to restart the inetd daemon it throughing error.
Please find the message and tell me what i need to do ?
Apr 7 22:57:37 HYDOHS01 inetd: ISTATE not in environment
Apr 7 22:57:41 HYDOHS01 inetd: stop: No such file or directory
Apr 7 22:58:01 HYDOHS01 inetd: ... (5 Replies)
Discussion started by: lbreddy
5 Replies
9. HP-UX
Hi HP-UX users. If you can help with the following I would be grateful. I am starting off on my HP-UX learning/certification path and need to acquire an HP-UX machine. I would prefer HP hardware, ie. PA-RISC and see that there are many for sale on eBay, etc., and was hoping someone on this forum... (2 Replies)
Discussion started by: patcom
2 Replies
10. Shell Programming and Scripting
I am very new to shell scripting. please help me in this scenario.
when we run the script, It should ask user to enter the input (for example, ticket number like below)
B1234567
B2345678
C1245782
.
2. Once user enter the input or,paste the input, the script should check each and every... (1 Reply)
Discussion started by: Padmanabhan
1 Replies
AMMT(8) System Manager's Manual AMMT(8)
NAME
ammt - Amanda version of mt
SYNOPSIS
ammt [ -d ] [ -f|-t device ] command [ count ]
DESCRIPTION
Ammt provides just enough of the standard mt command for the needs of Amanda. This is handy when doing a full restore and the standard mt
program has not yet been found.
Ammt also provides access to the Amanda output drivers that support various tape simulations.
See the amanda(8) man page for more details about Amanda. See the OUTPUT DRIVERS section of amanda(8) for more information on the Amanda
output drivers.
OPTIONS
-d Turn on debugging output.
-f device
Access tape device device. If not specified, the TAPE environment variable is used.
-t device
Same as -f.
command count
Which command to issue, and an optional count of operations.
COMMANDS
Each command may be abbreviated to whatever length makes it unique.
eof|weof count
Write count (default: 1) end of file marks (tapemarks).
fsf count
Skip forward count (default: 1) files.
bsf count
Skip backward count (default: 1) files.
asf count
Position to file number count (default: 0) where zero is beginning of tape. This is the same as a rewind followed by a fsf count.
rewind Rewind to beginning of tape.
offline|rewoffl
Rewind to beginning of tape and unload the tape from the drive.
status Report status information about the drive. Which data reported, and what it means, depends on the underlying operating system, and
may include:
ONLINE Indicates the drive is online and ready.
OFFLINE
Indicates the drive is offline or not ready.
BOT Indicates the drive is at beginning of tape.
EOT Indicates the drive is at end of tape.
PROTECTED
Indicates the tape is write protected.
ds Device status.
er Error register.
fileno Current tape file number.
blkno Current tape block number file.
NOTE: many systems only report good data when a tape is in the drive and ready.
AUTHOR
Marc Mengel <mengel@fnal.gov>
John R. Jackson <jrj@purdue.edu>
SEE ALSO
amanda(8)
AMMT(8)