Problemwith 3510 array. Post: 65750

10 More Discussions You Might Find Interesting

1. Solaris

adding existing disks to a 3510 array

I would like to extend a logical drive on our 3510. I have four unallocated disks which I would like to use for this purpose. The 3510 supports a Sun Cluster but for now all I wish to see is a "new" disk when I run format. I am a little familiar with the telnet/ssh session on the 3510 but am...

2. Solaris

SE 3510 Battery Issue

Hi everyone, I changed the batteries on 29-Jun-2008 for the storedges. But received error messages from the server today,I used the "-u" option to update the service date information but it syntaticaly fails. Why? Jul 4 12:00:03 auriga SUNWscsdServer: <rctrl8001> The battery on...

3. Programming

Creating an array to hold posix thread ids: Only dynamic array works

I am facing a strange error while creating posix threads: Given below are two snippets of code, the first one works whereas the second one gives a garbage value in the output. Snippet 1 This works: -------------- int *threadids; threadids = (int *) malloc (num_threads * sizeof(int)); ...

4. Solaris

EFI Disk labels on 3510 raid array

Hi Peeps, Can anyone help me an EFI lablel on a 3510 raid array that I cannot get rid of, format -e and label just asks you if you want to label it. Want an SMI label writing to it. Anyone got any ideas on how to remove the EFI label? Thanks in advance Martin

5. UNIX for Advanced & Expert Users

3510 Disk Array Problem

I have a 3510 disk array attached to a T2000 server. The dmesg command shows disk error as follows and is generated a couple of times during the day Aug 18 03:35:51 myserver SUNWscsdMonitor: <rctrl6042> Standard General Event, CHL:2 ID:22 Drive NOTICE: Drive Recovered Error - 5F8E1F...

6. Shell Programming and Scripting

PHP: Search Multi-Dimensional(nested) array and export values of currenly worked on array.

Hi All, I'm writing a nagios check that will see if our ldap servers are in sync... I got the status data into a nested array, I would like to search key of each array and if "OK" is NOT present, echo other key=>values in the current array to a variable so...eg...let take the single array...

7. Shell Programming and Scripting

perl, put one array into many array when field is equal to sth

Hi Everyone, #!/usr/bin/perl use strict; use warnings; my @test=("a;b;qqq;c;d","a;b;ggg;c;d","a;b;qqq;c;d"); would like to split the @test array into two array: @test1=(("a;b;qqq;c;d","a;b;qqq;c;d"); and @test2=("a;b;ggg;c;d"); means search for 3rd filed. Thanks find the...

8. Shell Programming and Scripting

PERL : Read an array and write to another array with intial string pattern checks

I have an array and two variables as below, I need to check if $datevar is present in $filename. If so, i need to replace $filename with the values in the array. I need the output inside an ARRAY How can this be done. Any help will be appreciated. Thanks in advance.

9. Shell Programming and Scripting

Bash 3.2 - Array / Regex - IF 3rd member in array ends in 5 digits then do somthing...

Trying to do some control flow parsing based on the index postion of an array member. Here is the pseudo code I am trying to write in (preferably in pure bash) where possible. I am thinking regex with do the trick, but need a little help. pesudo code if == ENDSINFIVEINTS ]]; then do...

10. Shell Programming and Scripting

Bash arrays: rebin/interpolate smaller array to large array

hello, i need a bit of help on how to do this effectively in bash without a lot of extra looping or massive switch/case i have a long array of M elements and a short array of N elements, so M > N always. M is not a multiple of N. for case 1, I want to stretch N to fit M arrayHuge H = (...

LEARN ABOUT NETBSD

arcmsr

ARCMSR(4)						   BSD Kernel Interfaces Manual 						 ARCMSR(4)

NAME

     arcmsr -- Areca Technology Corporation SATA/SAS RAID controller

SYNOPSIS

     arcmsr* at pci? dev ? function ?

DESCRIPTION

     The arcmsr driver provides support for the PCI-X and PCI Express RAID controllers from Areca Technology Corporation:

	   -   ARC-1110 PCI-X 4 Port SATA RAID Controller
	   -   ARC-1110ML PCI-X 4 Port SATA RAID Controller
	   -   ARC-1120 PCI-X 8 Port SATA RAID Controller
	   -   ARC-1120ML PCI-X 8 Port SATA RAID Controller
	   -   ARC-1130 PCI-X 12 Port SATA RAID Controller
	   -   ARC-1130ML PCI-X 12 Port SATA RAID Controller
	   -   ARC-1160 PCI-X 16 Port SATA RAID Controller
	   -   ARC-1160ML PCI-X 16 Port SATA RAID Controller
	   -   ARC-1170 PCI-X 24 Port SATA RAID Controller
	   -   ARC-1200 Rev A PCI Express 2 Port SATA RAID Controller
	   -   ARC-1202 PCI Express 2 Port SATA RAID Controller
	   -   ARC-1210 PCI Express 4 Port SATA RAID Controller
	   -   ARC-1220 PCI Express 8 Port SATA RAID Controller
	   -   ARC-1230 PCI Express 12 Port SATA RAID Controller
	   -   ARC-1230ML PCI Express 12 Port SATA RAID Controller
	   -   ARC-1231ML PCI Express 12 Port SATA RAID Controller
	   -   ARC-1260 PCI Express 16 Port SATA RAID Controller
	   -   ARC-1260ML PCI Express 16 Port SATA RAID Controller
	   -   ARC-1261ML PCI Express 16 Port SATA RAID Controller
	   -   ARC-1280 PCI Express 24 Port SATA RAID Controller
	   -   ARC-1280ML PCI Express 24 Port SATA RAID Controller
	   -   ARC-1680 PCI Express 8 Port SAS RAID Controller
	   -   ARC-1680LP PCI Express 8 Port SAS RAID Controller
	   -   ARC-1680i PCI Express 8 Port SAS RAID Controller
	   -   ARC-1680x PCI Express 8 Port SAS RAID Controller
	   -   ARC-1681 PCI-X 8 Port SAS RAID Controller

     These controllers support RAID levels 0, 1, 1E, 3, 5, 6, and JBOD using either SAS or SATA II drives.

     arcmsr supports management and monitoring of the controller through the bioctl(8) and envstat(8) commands.

     Please note, however, that to use some features that require special privileges, such as creating/removing hot-spares, pass-through disks or
     RAID volumes will require to have the password disabled in the firmware; otherwise a Permission denied error will be reported by bioctl(8).

     When a RAID 1 or 1+0 volume is created, either through the bioctl(8) command or controller's firmware, the volume won't be accessible until
     the initialization is done.  A way to get access to the sd(4) device that corresponds to that volume without rebooting, is to issue the fol-
     lowing command (once the initialization is finished):

     $ scsictl scsibus0 scan any any

     The arcmsr driver will also report to the kernel log buffer any error that might appear when handling firmware commands, such as used by the
     bioctl(8) command.

EVENTS

     The arcmsr driver is able to send events to powerd(8) if a volume or any drive connected to the volume is not online.  The state-changed
     event will be sent to the /etc/powerd/scripts/sensor_drive script when such condition happens.

SEE ALSO

     intro(4), pci(4), scsi(4), sd(4), bioctl(8), envstat(8), powerd(8), scsictl(8)

HISTORY

     The arcmsr driver first appeared in NetBSD 5.0.

AUTHORS

     The arcmsr driver was originally written for OpenBSD by David Gwynne.  It was ported to NetBSD and extended by Juan Romero Pardines.

BSD
								   March 3, 2008							       BSD

10 More Discussions You Might Find Interesting

1. Solaris

adding existing disks to a 3510 array

Discussion started by: malcqv

2. Solaris

SE 3510 Battery Issue

Discussion started by: incredible

3. Programming

Creating an array to hold posix thread ids: Only dynamic array works

Discussion started by: kmehta

4. Solaris

EFI Disk labels on 3510 raid array

Discussion started by: callmebob