I need to move everything from an older ultra 1 onto a newer ultra 60 (OS and all) running SUNOS 5.5.1. Any suggestions on the best way to do this?
Frank
P.S. If you know of a document somewhere please let me know. (11 Replies)
I work in a computer company which sells computer configurations and parts of them. And I want to give a choice to customers. If they want to buy a PC with Linux installed, not Windows. But I find difficult to test the Graphic Cards in Linux OS. I have searched the web and I didn't found any... (2 Replies)
Hi,
Is there a precompiled binary for Solaris 8 available?
I need to bench mark our Oracle server,
as we are upgrading from SFv880 to SFv890.
Both are fully loaded.
I can't find a sun machine that I can compile the software on.
Tks
JohnHo (0 Replies)
There is a basic principal that you cannot average averages. The overall result for the benchmark should be calculated by dviding the sum of the target results by the sum of the baseline results. This is not the same as dividing the sum of the index results by 6. Changing the way this is... (0 Replies)
Type: UltraSPARC IIIi 1,593 Mhz x2
Ram: 16G
Disk: 2*70G fw scsi drives
Load: db application
kernel: Sunos5.10
pgms: compiled Sun cc -O2
==============================================================
BYTE UNIX Benchmarks (Version 3.11)
System -- SunOS sun.spmbox.com 5.10... (2 Replies)
Discussion started by: mr_manny
2 Replies
LEARN ABOUT NETBSD
ixpide
IXPIDE(4) BSD Kernel Interfaces Manual IXPIDE(4)NAME
ixpide -- PCI IDE disk controllers driver
SYNOPSIS
ixpide* at pci? dev ? function ? flags 0x0000
DESCRIPTION
The ixpide driver supports the ATI Technologies IXP IDE controller, and provides the interface with the hardware for the ata(4) driver.
The 0x0002 flag forces the ixpide driver to disable DMA on chipsets for which DMA would normally be enabled. This can be used as a debugging
aid, or to work around problems where the IDE controller is wired up to the system incorrectly.
HARDWARE
The supported IDE controllers are
o ATI SB200
o ATI SB300
o ATI SB400, Parallel ATA
o ATI SB400, Serial ATA
o ATI SB700, Serial and Parallel ATA
SEE ALSO ata(4), atapi(4), intro(4), pci(4), pciide(4), wd(4), wdc(4)CAVEATS
Some SB700 controllers can hang under load when Native IDE mode is selected in the system BIOS, but work fine in AHCI mode.
BSD October 16, 2008 BSD