02-27-2004
Use lvdisplay to view each logical volume. You can do this
from the command line or within SAM
For example:
# lvdisplay /dev/vg00/lvol1
LV Name /dev/vg00/lvol1
VG Name /dev/vg00
LV Permission read/write
LV Status available/syncd
Mirror copies 0
Consistency Recovery MWC
Schedule parallel
LV Size (Mbytes) 512
Current LE 64
Allocated PE 64
Stripes 0
Stripe Size (Kbytes) 0
Bad block off
Allocation strict/contiguous
IO Timeout (Seconds) default
The "Mirror copies" output tells you if the logical volume is
mirrored or not. In the above example it is not.
10 More Discussions You Might Find Interesting
1. AIX
How do I know, which all disks are mirrored? any command?
Bala (7 Replies)
Discussion started by: balaji_prk
7 Replies
2. UNIX for Dummies Questions & Answers
What is the correct mkfs syntax to create mirrored disk files systems? I need to make the file system 20gb. For example:
machine# mkfs -F ufs /dev/md/dsk/d40
size not specified
ufs usage: mkfs special size(sectors) \
-m : dump fs cmd line used to make this partition
-V : print this... (4 Replies)
Discussion started by: GLJ@USC
4 Replies
3. UNIX for Dummies Questions & Answers
Hi all,
I have a V490 running with Solaris 10. The OS disk was mirrored. I wanted to break the mirror, boot with the secondary mirror, and re-mirror the OS with a new disk.
This is what I did,
detached the metadevices of the secondary mirror disk (disk 1)
metaclear-ed the metadevices,... (1 Reply)
Discussion started by: nitinp82
1 Replies
4. Solaris
Hello once again seeking your help,
I have a mirrored disk and need to unmirror it to mount it as a new file system (/export) but could not find the correct steps to do it with out affecting the original disk.
can anybody point me out on how to get this done.
Thanks!! (3 Replies)
Discussion started by: AQG
3 Replies
5. UNIX for Dummies Questions & Answers
How we can know number of inode present in my Disk including free and occupied.
Is there any tool or program to know how much free inode are there in inode free list . (2 Replies)
Discussion started by: mr_deb
2 Replies
6. UNIX for Advanced & Expert Users
I have a HP proliant ML 570 G3 with two 146GB disk drives mirrored(RAID1+0)
windows server 2003 was installed on that disk.
I will add a disk.(scsi 300GB)
I will install Linux on that additional disk.
I want to create multiple-boot system.
Is it possible?
I wanna know how to create... (0 Replies)
Discussion started by: lifegeek
0 Replies
7. Solaris
So I have mirrored disk already set up from c1t0d0 to c1t1d0. Is there some special procedures that I need to do before I do and then try to boot from the mirrored disk? I am using a V490 if that helps... (7 Replies)
Discussion started by: drew_1980
7 Replies
8. Solaris
I have a v480 with a mirrored boot disk c1t0 and c1t1. The drives themselves don't show a failure but the mirror's need maintenance.
This is my plan for replacing the drive. I would love feedback to point out what I"m missing or where my steps are incorrect.
Two things I believe I'm... (3 Replies)
Discussion started by: pcoffey
3 Replies
9. Red Hat
Hi guys,
thanks for helping out.
If you have two boot disk mirrored and your primary boot disk fails, how will you boot the system from the second disk?
Thank you very much for your assistance on this matter.
Arrey (5 Replies)
Discussion started by: cjashu
5 Replies
10. AIX
Hi
Please let me know how to check disk model number.
I have already tried prtconf command but there is no such information related to model number.
Regards,
Scriptor (3 Replies)
Discussion started by: scriptor
3 Replies
LVREMOVE(8) System Manager's Manual LVREMOVE(8)
NAME
lvremove - remove a logical volume
SYNOPSIS
lvremove [-A|--autobackup {y|n}] [-d|--debug] [-h|--help] [-t|--test] [-v|--verbose] [--version] [-f|--force] [--noudevsync] LogicalVol-
ume{Name|Path} [LogicalVolume{Name|Path}...]
DESCRIPTION
lvremove removes one or more logical volumes. Confirmation will be requested before deactivating any active logical volume prior to
removal. Logical volumes cannot be deactivated or removed while they are open (e.g. if they contain a mounted filesystem). Removing an
origin logical volume will also remove all dependent snapshots.
If the logical volume is clustered then it must be deactivated on all nodes in the cluster before it can be removed. A single lvchange com-
mand issued from one node can do this.
OPTIONS
See lvm(8) for common options.
-f, --force
Remove active logical volumes without confirmation.
--noudevsync
Disable udev synchronisation. The process will not wait for notification from udev. It will continue irrespective of any possible
udev processing in the background. You should only use this if udev is not running or has rules that ignore the devices LVM2 cre-
ates.
EXAMPLES
Remove the active logical volume lvol1 in volume group vg00 without asking for confirmation:
lvremove -f vg00/lvol1
Remove all logical volumes in volume group vg00:
lvremove vg00
SEE ALSO
lvcreate(8), lvdisplay(8), lvchange(8), lvm(8), lvs(8), lvscan(8), vgremove(8)
Sistina Software UK LVM TOOLS 2.02.95(2) (2012-03-06) LVREMOVE(8)