WLAN PCI Cards Post: 45760

10 More Discussions You Might Find Interesting

1. AIX

PCI Ethernet Cards for IBM RISC 6000 - B50's

I am trying to find PCI Ethernet cards that are compatible with the IBM RISC 6000 - B50 Power PC. None of the regular NIC's seem to have AIX drivers. Does anyone know of AIX drivers for standard PCI Ethernet NIC's or a non IBM NIC that works with the Model B50 at 10/100 MB ?

2. Solaris

Pci Id

How do I get the PCI ID for my Realtek adapter? It's a Solaris x86 installation.

3. Solaris

Moving HBA cards to different PCI slots

Has anyone ever relocated an HBA card after already having it configured in another PCI slot? I've found that the HBA instance #'s start incrementing past the previous. It results in me having to have my instance numbers in /kernel/drv/qla2300.conf be 4,5,6,7 instead of 0,1,2,3. Cleanup with...

4. Solaris

X6799A PCI cards and Sunfire v880

Hi, Can X6799A PCI single fiber channel cards be fitted into the top 2 slots of a Sunfire v880. These 2 slots are 66Mhz and X6799A are supposed to be able to connect at this speed. However , I believe the cards are 5volts , whilst the slots are 3.3volts.

5. Linux

Odd WLAN Device Problem

I'm trying to help convert my boss over to Linux. He has an HP/Compaq PC on which he installed Fedora Core 4 on. It's got a Linksys wireless card in it and we're using the NDIS wrapper to load the Windows driver for the chipset on that card. 'iwconfig' sees the card. We can configure the card. ...

6. Linux

UNIX command for Getting IP addresss of different hosts in WLAN

Is thre any command by which i can get the IP addresses of different machines present in a Wireless Local Network Area.

7. Cybersecurity

SSH login via wlan

Hi Is it totally safe to login via SSH through a wlan that is not encrypted? Is there anything to think about when doing it?

8. IP Networking

How to access others machine in my WLAN

Here is the thing. I've got a TP link router (TL-WR541G) and 3 PCs accessing to Internet through it. 2 Desktop PCs (1 with Debian and 1 WinXP) 1 laptop (with Ubuntu). In my router (192.168.1.1) I can see the MAC and IP of all machines assigned (DHCP) by the router. But when I ping to them...

9. IP Networking

Radvd wlan problems

Hi all, I am trying to get radvd to broadcast router advertisements on a wireless interface (wlan0). The wireless interface is running an ad-hoc wireless network. However, for some reason, radvd will say that wlan0 not running and refuse to start. The only way I can get radvd to broadcast...

10. Shell Programming and Scripting

WLAN receiving DHCP-IP Address doesn't work

Hey guys, I run my raspberry pi with a TP-Link Wlan-USB stick. The stick works out of the box with the pi-modded debian. But eventhough the automatic connection to one of the saved WLAN-networks in the file /etc/wpa_supplicant/wpa_supplicant.conf works, my PI doesn't request or receive an...

LEARN ABOUT NETBSD

ray

RAY(4)							   BSD Kernel Interfaces Manual 						    RAY(4)

NAME

     ray -- Raytheon Raylink / WebGear Aviator IEEE 802.11 2Mbps Wireless

SYNOPSIS

     ray* at pcmcia? function ?
     options RAY_PID_COUNTRY_CODE_DEFAULT=RAY_PID_COUNTRY_CODE_USA

DESCRIPTION

     The ray device driver supports the Raytheon Raylink and Aviator 2.4/PRO 802.11 FH 2Mbps wireless PCMCIA cards.  The cards can be operated in
     either ad-hoc or infrastructure modes. The operating mode is selectable with ifconfig(8) through a media option.

     To communicate with other 802.11 cards a common network id or NWID must be specified on each station that wishes to participate in the shared
     wireless network.	The NWID can be set with ifconfig(8).

     The device uses IEEE 802.11 standard Frequency Hopping Spread Spectrum signaling and operates in the ranges of 2.400 to 2.4835 Gigahertz.
     This frequency range is further restricted by country according to that country's regulations.  Currently the ray driver defaults to using
     the ranges appropriate for the USA.  To change this setting you must define the kernel option RAY_PID_COUNTRY_CODE_DEFAULT to one of the fol-
     lowing values:

     RAY_PID_COUNTRY_CODE_USA
     RAY_PID_COUNTRY_CODE_EUROPE
     RAY_PID_COUNTRY_CODE_JAPAN
     RAY_PID_COUNTRY_CODE_KOREA
     RAY_PID_COUNTRY_CODE_SPAIN
     RAY_PID_COUNTRY_CODE_FRANCE
     RAY_PID_COUNTRY_CODE_ISRAEL
     RAY_PID_COUNTRY_CODE_AUSTRALIA

     The output power of the transceiver is 100mW and the card's power consumption is 365 mA @ 5 volts.  The transmission range in open air (line
     of sight) is a maximum of 1000 feet (or ~304 meters), and indoors (i.e., with obstructions) it is a maximum of 500 feet (152 meters).

HARDWARE

     Cards supported by the ray driver include:

     WebGear Aviator 2.4
     WebGear Aviator PRO
     Raytheon Raylink WLAN

DIAGNOSTICS

     ray0: card failed self test: status x  Indicates the card has failed its initial startup tests.

SEE ALSO

     ifmedia(4), intro(4), pcmcia(4), ifconfig(8)

HISTORY

     The ray driver first appeared in NetBSD 1.5.

AUTHORS

     The ray driver was written by Christian E. Hopps <chopps@NetBSD.org>.

BUGS

     Currently the infrastructure mode is untested, and authentication using WEP is unimplemented.

BSD
								 January 24, 2000							       BSD

10 More Discussions You Might Find Interesting

1. AIX

PCI Ethernet Cards for IBM RISC 6000 - B50's

Discussion started by: rahe

2. Solaris

Pci Id

Discussion started by: kuultak

3. Solaris

Moving HBA cards to different PCI slots

Discussion started by: kduffin

4. Solaris

X6799A PCI cards and Sunfire v880

Discussion started by: markdr011

5. Linux

Odd WLAN Device Problem

Discussion started by: deckard

6. Linux

UNIX command for Getting IP addresss of different hosts in WLAN

Discussion started by: vasurake

7. Cybersecurity

SSH login via wlan

Discussion started by: hjalle