12-22-2003
I would set the auto-boot to false, so it kicks you to the "ok" prompt. It is cleaner then a stop-A. Then try the probe-scsi-all.
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
Can anyone out there help me out? I'm trying to install a scsi tape back up on a sys running sco openserver 5.0.4. When I go through the steps for mkdev tape it seems like it works, but when I reboot I still don't see the tape. Also when it boots up I get a scsi bios not installed error. I've... (1 Reply)
Discussion started by: goatboy_tx
1 Replies
2. Solaris
Hi. I need to find a simple SCSI adapter card for a Sun Ultra 5 workstation. I don't need the type w/ ethernet attached (e.g. X1032) as I already have ethernet onboard & they are more spendy.
I know Adaptec is out, but what unit would work? I am attaching an external SCSI tape unit to this... (4 Replies)
Discussion started by: Plain Person
4 Replies
3. AIX
I have 1 PCI-X Dual Channel Ultra320 SCSI Adapter card for my p570 server. I would like to split the 2 channels for the usage of 2 tape drives in different LPARs. Is that possible?
For example, I have 2 LPARs running in p570 server, LPAR-A configured the Ultra320 card as pci7 in slot... (11 Replies)
Discussion started by: kwliew999
11 Replies
4. SCO
Hello,
I'm having some issues with installing SCSI tape drive on SCO 5.0.6
hardware config shows the following adapters
%adapter 0xE800-0xE8FF 10 - type=alad ha=0 bus=0 id=7 fts=sto
%adapter 0x0170-0x0177 15 - type=IDE ctlr=secondary dvr=wd
%adapter - 3 - ... (3 Replies)
Discussion started by: ananth_ak
3 Replies
5. UNIX for Dummies Questions & Answers
i hava bought scsi card for taking backup in a 12/24 DAT DRIVE -scounix5.05 i am havaing the cd of the same contain driver files how should i install it. can anybody help me. (0 Replies)
Discussion started by: tatacoffee
0 Replies
6. Filesystems, Disks and Memory
I need to hook a tape library to my compy (tru64 versifon 4F) by way of SCSI.
I can get as far as plugging it in on my own.
Please help
Thanks (0 Replies)
Discussion started by: randUSR()
0 Replies
7. SCO
I inserted a PCI Realtek RTL8139 network adapter on a PC running SCO Openserver 5.0.6.
I successfully loaded drivers and I'm trying to install the card with netconfig command, unfortunately without success.
Here are the steps I follow to install the card:
I run netconfig, from menu 'hardware'... (2 Replies)
Discussion started by: kampus
2 Replies
8. Hardware
I need to connect 80pin SCA Ultra320 SCSI hdd to 68pin.
There are rumors that some bad "passive" adapters with problematic termination can fry the HDD. The adapter we got is Assmann ABSCA-2. Hard drive is 'Fujitsu MAW3073NC'
Do we need to set any jumpers before turning it on?
We already had... (0 Replies)
Discussion started by: orange47
0 Replies
9. SCO
OK group, it's been 12 years since I worked with SCO. I need some direction here:
SCO Openserver 5.07
I have a server with a bad motherboard. I have moved the SCSI adapter and hard drive to another computer. This new server has different hardware so I must install the chipset drivers for... (1 Reply)
Discussion started by: jscholz
1 Replies
10. HP-UX
I am trying to reload a RP4440 with 2x300gb disks and dual Port Network card, with HPUX 11.11 Sept 2003. When the os boots and and gets to the main menu to install HPUX or run recovery, it cannot find the disks or NIC.
At the OS prompt (after loading files), ioscan shows the Class ba, and shows... (0 Replies)
Discussion started by: mrmurdock
0 Replies
LEARN ABOUT DEBIAN
tapset::scsi
TAPSET::SCSI(3stap) TAPSET::SCSI(3stap)
NAME
tapset::scsi - systemtap scsi probe points
DESCRIPTION
This family of probe points is used to probe the SCSI activities. It contains the following probe points:
scsi.ioentry
Fires when SCSI mid layer prepares a SCSI request
Arguments:
disk_major
The major number of the disk
disk_minor
The minor number of the disk
device_state
The current state of the device. The possible values could be:
SDEV_CREATED = 1, /* device created but not added to sysfs
* Only internal commands allowed (for inq) */
SDEV_RUNNING = 2, /* device properly configured
* All commands allowed */
SDEV_CANCEL = 3, /* beginning to delete device
* Only error handler commands allowed */
SDEV_DEL = 4, /* device deleted
* no commands allowed */
SDEV_QUIESCE = 5, /* Device quiescent. No block commands
* will be accepted, only specials (which
* originate in the mid-layer) */
SDEV_OFFLINE = 6, /* Device offlined (by error handling or
* user request */
SDEV_BLOCK = 7, /* Device blocked by scsi lld. No scsi
* commands from user or midlayer should be issued
* to the scsi lld. */
scsi.iodispatching
Fires when the SCSI mid layer dispatches a SCSI command to the low level driver
Arguments:
host_no
The host number
channel
The channel number
lun
The lun number
dev_id
The scsi device id
device_state
The current state of the device.
data_direction
The data_direction specifies whether this command is from/to the device.
The possible values could be:
DMA_BIDIRECTIONAL = 0,
DMA_TO_DEVICE = 1,
DMA_FROM_DEVICE = 2,
DMA_NONE = 3,
request_buffer
The request buffer address
req_bufflen
The request buffer length
scsi.iodone
Fires when a SCSI command is done by low level driver and enqueued into the done queue.
Arguments:
host_no
The host number
channel
The channel number
lun
The lun number
dev_id
The scsi device id
device_state
The current state of the device
data_direction
The data_direction specifies whether this command is from/to the device.
scsi.iocompleted
Fires when SCSI mid layer runs the completion processing for block device I/O requests
Arguments:
host_no
The host number
channel
The channel number
lun
The lun number
dev_id
The scsi device id
device_state
The current state of the device
data_direction
The data_direction specifies whether this command is from/to the device.
goodbytes
The bytes completed.
SEE ALSO
stap(1), stapprobes(3stap)
IBM
TAPSET::SCSI(3stap)