01-06-2003
ok, first off, sorry i took so long to repost my current status, i wanted to make surei try everything before i post back as to not waste anyones time. i tried every possible configuration i could think of, i even tried different IDE cables i had lying around, and when that didnt work i bought new ones and tried those. i also bought a box of jumpers at a computer show, and tried those too. so basically, whatever drive i set as master, it will mount standard data cds, but no music cds. the slave cdrom drive, wont mount anything, and gives the same error messages that i have posted before. at boot up the system detects both drives and prints the correct make and model of each drive, each one assigned to the correct location, master, slave. let me say again incase i forgot to, both these drives have worked together with windows, so the drives are fully functional, as far as i can tell. ive also tried multiple data cds, and multiple music cds, as well as data cd-r's and music cd-r's. whats wrong here?? and thank you again for your time.
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
ok here is what i do and get:
# mount /dev/sd6a /cdrom
mount /dev/sd6a write-protected
ok so what do i do its a external cdrom and its on scsi number 6. its a SparcSTATION 2. we're trying to put red hat sparc 6.2 on it but it wont boot. i am about to take the hard drives out and install it a... (8 Replies)
Discussion started by: wixifer
8 Replies
2. UNIX for Dummies Questions & Answers
How would I mount a cdrom drive in Unix (4 Replies)
Discussion started by: Hordak
4 Replies
3. UNIX for Dummies Questions & Answers
Hi Everyone,
I have a problem. I'm trying too reinstall sun solaris 8.0 on may Sunfire 280r but solaris 9.0 is all ready installed. I tried to boot from cd rom it keeps telling me that File does not seem executable. I need to get Solaris 8.0 on this system. I have boot all ready in single mode... (4 Replies)
Discussion started by: Peterh
4 Replies
4. Solaris
Hi I have placed a CD into the rom and now I can not eject it.
when i type in
eject cdrom i get the follwing error
root@ssdb0009 # eject cdrom
/vol/dev/rdsk/c0t6d0/dp_a0500_solaris_7_and_8_cd: Device busy
Therefore i try and eject it with the -f option (eject -f cdrom) I still get the... (4 Replies)
Discussion started by: dennisca
4 Replies
5. UNIX for Dummies Questions & Answers
We use
#eject cdrom
to eject the cdrom . Is there a way to "close" it after using that command ?
is there a command to eject floppy ?
Thanks (7 Replies)
Discussion started by: hitlermom
7 Replies
6. UNIX for Dummies Questions & Answers
Hey everyone,
Quick question...I am trying to get packages off a cdrom for NETBSD. I tried mounting using this command mount /dev/rccd0a /etc/home/cdrom. But I just get an error.
I did a dmesg |grep ^cd and it said that my cdrom was at cd0.?
Am I doing something wrong.? Any help would... (2 Replies)
Discussion started by: vaff4k
2 Replies
7. UNIX for Dummies Questions & Answers
Hi,
I'm looking to mount a cd on an old AViiON system we have. No one here really has any expertise with this platform so any help will be appreciated. I * think* the device is sd(apsc(pci(1),B,0,7),5,0), however I'm not sure at all.
Thanks! (0 Replies)
Discussion started by: madesjardins
0 Replies
8. Solaris
i am having a problem when trying to boot from cdrom. I received the below message
system is not bootable, boot command is disabledfound
how can i fix this.
also what is the key combination on ordinary keyboard for STOP+A. Is it ctrl+break? (2 Replies)
Discussion started by: shabu
2 Replies
9. Solaris
Hi,
I want to know HOw can I know on which slice cdrom is mounted?by default on which slice generally it is mounting? (1 Reply)
Discussion started by: manoj.solaris
1 Replies
10. Solaris
FYI noob to here and sun blades...
I have a sun blade 100 and I can't get the cdrom to work. if i try using vold that doesn't seem to work either...maybe i'm not using it correctly.
Upon boot you can open/close the cdrom and it runs but after i'm logged in it won't open and i can't access it... (2 Replies)
Discussion started by: shaun138
2 Replies
LEARN ABOUT XFREE86
apt-cdrom
APT-CDROM(8) APT APT-CDROM(8)
NAME
apt-cdrom - APT CD-ROM management utility
SYNOPSIS
apt-cdrom [-rmfan] [-d=cdrom_mount_point] [-o=config_string] [-c=config_file] {add | ident | {-v | --version} | {-h | --help}}
DESCRIPTION
apt-cdrom is used to add a new CD-ROM to APT's list of available sources. apt-cdrom takes care of determining the structure of the disc as
well as correcting for several possible mis-burns and verifying the index files.
It is necessary to use apt-cdrom to add CDs to the APT system; it cannot be done by hand. Furthermore each disc in a multi-CD set must be
inserted and scanned separately to account for possible mis-burns.
Unless the -h, or --help option is given, one of the commands below must be present.
add
add is used to add a new disc to the source list. It will unmount the CD-ROM device, prompt for a disc to be inserted and then proceed
to scan it and copy the index files. If the disc does not have a proper .disk directory you will be prompted for a descriptive title.
APT uses a CD-ROM ID to track which disc is currently in the drive and maintains a database of these IDs in /var/lib/apt/cdroms.list
ident
A debugging tool to report the identity of the current disc as well as the stored file name
OPTIONS
All command line options may be set using the configuration file, the descriptions indicate the configuration option to set. For boolean
options you can override the config file by using something like -f-,--no-f, -f=no or several other variations.
--no-auto-detect, --cdrom
Do not try to auto-detect the CD-ROM path. Usually combined with the --cdrom option. Configuration Item: Acquire::cdrom::AutoDetect.
-d, --cdrom
Mount point; specify the location to mount the CD-ROM. This mount point must be listed in /etc/fstab and properly configured.
Configuration Item: Acquire::cdrom::mount.
-r, --rename
Rename a disc; change the label of a disc or override the disc's given label. This option will cause apt-cdrom to prompt for a new
label. Configuration Item: APT::CDROM::Rename.
-m, --no-mount
No mounting; prevent apt-cdrom from mounting and unmounting the mount point. Configuration Item: APT::CDROM::NoMount.
-f, --fast
Fast Copy; Assume the package files are valid and do not check every package. This option should be used only if apt-cdrom has been run
on this disc before and did not detect any errors. Configuration Item: APT::CDROM::Fast.
-a, --thorough
Thorough Package Scan; This option may be needed with some old Debian 1.1/1.2 discs that have Package files in strange places. It takes
much longer to scan the CD but will pick them all up.
-n, --just-print, --recon, --no-act
No Changes; Do not change the sources.list(5) file and do not write index files. Everything is still checked however. Configuration
Item: APT::CDROM::NoAct.
-h, --help
Show a short usage summary.
-v, --version
Show the program version.
-c, --config-file
Configuration File; Specify a configuration file to use. The program will read the default configuration file and then this
configuration file. If configuration settings need to be set before the default configuration files are parsed specify a file with the
APT_CONFIG environment variable. See apt.conf(5) for syntax information.
-o, --option
Set a Configuration Option; This will set an arbitrary configuration option. The syntax is -o Foo::Bar=bar. -o and --option can be
used multiple times to set different options.
SEE ALSO
apt.conf(5), apt-get(8), sources.list(5)
DIAGNOSTICS
apt-cdrom returns zero on normal operation, decimal 100 on error.
BUGS
APT bug page[1]. If you wish to report a bug in APT, please see /usr/share/doc/debian/bug-reporting.txt or the reportbug(1) command.
AUTHORS
Jason Gunthorpe
APT team
NOTES
1. APT bug page
http://bugs.debian.org/src:apt
APT 1.6.3ubuntu0.1 30 November 2013 APT-CDROM(8)