Login or Register to Ask a Question and Join Our Community

Sponsored Content
Full Discussion: DEBUG_PROG and opts: parameter not set
Top Forums UNIX for Dummies Questions & Answers DEBUG_PROG and opts: parameter not set Post 31491 by RTM on Friday 8th of November 2002 10:13:10 AM
Old 11-08-2002
Have you set your display back to your p.c. (or workstation ) you are connecting from? Normally this would give a different error (can't open display) but it's possible.

Once you sign into the server via Exceed, set display to your IP address (from workstation)

Either setenv DISPLAY xxx.xxx.xxx.xxx:0
or
export DISPLAY=xxx.xxx.xxx.xxx:0


Also, you either need to be root or oracle user to do the install - follow the instructions that come with the product. You would proabably have to set up the oracle user and create the proper environment for it. Then do a su - to that user. Check your documentation.

The only other possible issue I can think of is that you don't have the correct path for java. Again, this should be documented in the installation guide.


Here is an example only of some of the steps in other types of Oracle installations: Note - I did put 'example only' - follow your documentation!!!

From SunSolve:
SETTING UP AN ORACLE USER AND LOADING ORACLE


Create oracle users and add a group called dba to the /etc/group file
Make sure the oracle userid is the same on both nodes.

Here's the group file:

root::0:root
other::1:
bin::2:root,bin,daemon
sys::3:root,bin,sys,adm
adm::4:root,adm,daemon
uucp::5:root,uucp
mail::6:root
tty::7:root,tty,adm
lp::8:root,lp,adm
nuucp::9:root,nuucp
staff::10:
daemon::12:root,daemon
sysadmin::14:
nobody::60001:
noaccess::60002:
dba::6003:oracle


1. cp /etc/skel/local.cshrc and local.login to oracle's home directory

2. Edit .cshrc and add the oracle environment:

# @(#)cshrc 1.11 89/11/29 SMI
umask 022
set path=(/bin /usr/bin /usr/ucb /etc /export/oracle/7.1.6/bin .)

setenv ORACLE_SID oracle
setenv ORACLE_HOME /export/oracle/7.1.6

if ( $?prompt ) then
set history=32
endif

NOTE: Oracle recommends making the ORACLE_SID parameter different on each node.
They recommend that you use the name of the database and a 1 and 2 after
it. For example, oracle1 and oracle2.


3. Make a directory called 7.1.6 (the oracle rev) in oracle's home directory.
This is where all the oracle executables will go.

4. Make sure .rhosts and hosts.equiv are set up so that you can rcp files back
and forth. When you install oracle, you install on one machine and the
installation program copies files to the second node.

5. Edit /etc/system and add the following section for shared memory to the
bottom of the file:

*
* set up shared memory for oracle
set semsys:seminfo_semmni=70
set semsys:seminfo_semmns=200
set shmsys:shminfo_shmmin=1
set shmsys:shm_info_shmmni=100
set shmsys:shm_info_shmseg=10
set shmsys:shminfo_shmmax=8388608
set semsys:seminfo_semmsl=50



NOTE: Before you begin installing oracle, make sure that the pdb is running
and all the volumes are owned by oracle.

6. Mount the oracle cdrom:

# mount -r -F hsfs /dev/dsk/c0t6d0s0 /cdrom

7. Run the orainst program as oracle:

% cd /cdrom/oracle/orainst

8. Set ORACLE_TERM to xsun if in xterm. Set ORACLE_TERM to sun if in cmdtool
% setenv ORACLE_TERM xsun
% orainst

disabled smilies --oombera
Last edited by oombera; 02-16-2004 at 01:31 PM..
 

10 More Discussions You Might Find Interesting

1. Shell Programming and Scripting

ksh: dbfFILe: parameter not set

Having the following message returned: FIND REDLOG FILES..... ksh: dbfFILe: parameter not set When I attempt to perform the script below....#!/bin/ksh . $HOME/.profile # Initial Script Prerequisites ORACLE_SID=MDirect ; export ORACLE_SID REDOLOGDIR=$ARCLOGDEST ; export REDOLOGDIR... (2 Replies)
Discussion started by: Cameron
2 Replies

2. Shell Programming and Scripting

how do I make dynamic parameter names? Or get the value of a parameter evaluated twi

Say I write something like the following: var1=1 var2=2 for int in 1 2 do echo "\$var$int" done I want the output to be: 1 2 Instead I get something like: $var1 $var2 (2 Replies)
Discussion started by: Awanka
2 Replies

3. UNIX and Linux Applications

set mysql password with host parameter

hi, linux gurus... i'm trying to write a script in ksh called ResetPass that allows a user to change mysql passwords. the script accepts user, password and host like this: ResetPass <user> <password> <host>. here's the code: ***************************************************** mysql... (1 Reply)
Discussion started by: ankimo
1 Replies

4. Shell Programming and Scripting

Dot operator and space, Parameter not set

Hi, i have this script setenv.sh if then echo "is empty" fi echo "done" The following is the result when i run the script from command without and with a dot and space operator $ setenv.sh is empty done $ . setenv.sh sh: VAR_1: Parameter not set. $ It's our standard to run... (5 Replies)
Discussion started by: ysrini
5 Replies

5. Shell Programming and Scripting

Command that takes one parameter and then searches for the passed in parameter

Hi I am looking for a unix command or a small shell script which can takes one parameter and then searches for the passed in the parameter in any or all files under say /home/dev/ Can anyone please help me on this? (3 Replies)
Discussion started by: pankaj80
3 Replies

6. Programming

Problem with STL's std::set container parameter to the operator << ()

Hi, I have this following code which gives me error when compiling. The problem is happening at the point where I create a const_iterator inside the overloaded insertion operator (i.e) operator << () function. The template argument version of set is not correct I guess. Could anyone please pitch... (3 Replies)
Discussion started by: royalibrahim
3 Replies

7. Shell Programming and Scripting

Passing parameter to script, and split the parameter

i am passing input parameter 'one_two' to the script , the script output should display the result as below one_1two one_2two one_3two if then echo " Usage : <$0> <DATABASE> " exit 0 else for DB in 1 2 3 do DBname=`$DATABASE | awk -F "_" '{print $1_${DB}_$2}` done fi (5 Replies)
Discussion started by: only4satish
5 Replies

8. Shell Programming and Scripting

"ksh: XYZ: parameter not set" in .profile

Hi, A very basic query. I am working on two different UNIX servers and I see different behaviours for my user id. This has to be a setting in the .profile, but I can't seem to find where :confused: So, in one server if I type echo $XYZDD (a random variable), I get a blank line with no... (2 Replies)
Discussion started by: ALDonP
2 Replies

9. Shell Programming and Scripting

Can't set parameter to lynx properly

My intention is to go through list of addresses and call google geocode api for each of them. I am using lynx for this, but somehow I can't supply the parameters to it in a proper way. To show that my parameters are OK I just hardcoded one address in my script and put it in my input file, and... (2 Replies)
Discussion started by: migurus
2 Replies

10. Shell Programming and Scripting

Solaris "ksh" Parameter Not Set

Getting the following when I try to set -u or set -o nounset in ksh on Solaris. Anyone ever seen this? Using an account I just built so everything is default and default shell is set to ksh. Oracle Corporation SunOS 5.11 11.3 September 2015 bar@solaris11:~$ echo $0 -ksh bar@solaris11:~$ set... (3 Replies)
Discussion started by: epost
3 Replies

LEARN ABOUT DEBIAN

sysdata

sysdata(1)						      General Commands Manual							sysdata(1)

NAME

       sysdata - find basic hardware system data

SYNOPSIS

       sysdata

DESCRIPTION

       After  the  atlc  package is built, a small benchmark is run as part of the testing procedure. This benchmark tries to get some information
       about the hardware. The program sysdata displays the same hardware information that the benchmark will display, but runs in a fraction of a
       second,	whereas  the benchmark can take from 19 s (quad 1.4 GHz Itainium 2 machine) to 14,906 s (for a very old 33.3 MHz Cray Y-MP). There
       are no options or arguments to sysdata

       The information gathered on hardware and software both developed by the same company (i.e. Solaris on Suns, AIX on  IBM	RS/6000,  IRIX	on
       SGI,  ...  etc etc) is generally more informative than the free systems (Linux, NetBSD, OpenBSD, FreeBSD) where it is usually impossible to
       get much hardware information.

EXAMPLES

       Here are some examples of the use of sysdata on a number of systems. The large number of examples is for my own use as much as anything, so
       I can keep track of the development of sysdata and see easily where it needs extending. Examples are presented for:

       1) Sun Ultra 80 running Solaris 9
       2) HP C3000 running HP-UX 11
       3) SGI Octane running IRIX 6.5.16
       4) IBM RS/6000 running AIX 5.2
       5) Dec Alpha 600a Personal Workstation running Tru64 5.1B
       6) Cray Y-MP running UNICOS 9
       7) Sun SPARCstation 20 running NetBSD 1.6
       8) Sun SPARCstation 20 running OpenBSD 3.2
       9) Sun SPARCstation 20 running Debian Linux
       10) Sun SPARCstation 20 running Solaris 2.5
       11) Generic PC with 350 MHz Pentium II running Redhat Linux 7.2

       Here's the output from sysdata on these 11 systems.

       e.g. 1 (Sun Ultra 80 running Solaris 9)
       Hardware provider:    Sun_Microsystems
       Hardware platform:    SUNW,Ultra-80
       Machine: 	     sun4u
       Sysname: 	     SunOS
       Release: 	     5.9
       Version: 	     Generic_112233-06
       Nodename:	     sparrow
       #CPUs supported:      4
       #CPUs online:	     4
       CPU type:	     sparcv9
       FPU type:	     sparcv9
       Speed:		     450 MHz
       RAM:		     4096 Mb
       L1 data cache	     unknown kB
       L1 instruction cache: unknown kB
       L2 cache:	     unknown kB

       Here's an example on a HP 9000 series Visualize C3000 workstation, fitted with one 400 MHz PA-RISC 8500 CPU and 1.5 Gb of RAM

       e.g. 2 (HP 9000 series Visualize C3000)
       Hardware provider:    HP
       Hardware platform:    unknown
       Machine: 	     9000/785
       Sysname: 	     HP-UX
       Release: 	     B.11.00
       Version: 	     A
       Nodename:	     robin
       #CPUs supported:      1
       #CPUs online:	     1
       CPU type:	     532
       FPU type:	     1048577
       Speed:		     400.0 MHz
       RAM:		     1536 Mb
       L1 data cache	     unknown kb
       L1 instruction cache: unknown kb
       L2 cache:	     unknown kb

       Here's another example this time on an SGI Octane R10000 with 2 x 195 MHz processors. Note the CPU and FPU types reported at not the R10000
       and R10010 that are reported by SGI's hinv. sysdata is not meant to replace other more sophisticated ways of obtaining  system  information
       (such as hinv on IRIX), but its data is useful to record for benchmarking purposes.

       e.g. 3 (SGI Octane R1000)
       Hardware provider:    SGI
       Hardware platform:    unknown
       Machine: 	     IP30
       Sysname: 	     IRIX64
       Release: 	     6.5
       Version: 	     04101931
       Nodename:	     owl
       #CPUs supported:      unknown
       #CPUs online:	     2
       CPU type:	     2343
       FPU type:	     2304
       Speed:		     195 MHz
       RAM:		     1024 Mb
       L1 data cache	     32 kB
       L1 instruction cache: 32 kB
       L2 cache:	     1024 kB

       Here's an example using an IBM RS/6000 F50 with 4 x 332 MHz CPUs and 1 GB of RAM.

       e.g. 4 (IBM RS/6000 F50)
       Hardware provider:    IBM
       Hardware platform:    unknown
       Machine: 	     000245984C00
       Sysname: 	     AIX
       Release: 	     2
       Version: 	     5
       Nodename:	     starling
       #CPUs supported:      unknown
       #CPUs online:	     4
       CPU type:	     unknown
       FPU type:	     unknown
       Speed:		     unknown MHz
       RAM:		     1024 Mb
       L1 data cache	     unknown kB
       L1 instruction cache: unknown kB
       L2 cache:	     unknown kB

       And here's an example from a single 599 MHz processor Dec Alpha 600a Personal Workstation running Tru64 5.1B

       e.g. 5 (Dec Alpha 600a Personal Workstation)
       Hardware provider:    unknown
       Hardware platform:    Digital_Personal_WorkStation_600au
       Machine: 	     alpha
       Sysname: 	     OSF1
       Release: 	     V5.1
       Version: 	     2650
       Nodename:	     dobermann.localhost.ntlworld.co
       #CPUs supported:      1
       #CPUs online:	     1
       CPU type:	     EV5.6_(21164A)
       FPU type:	     unknown
       Speed:		     599 MHz
       RAM:		     1024 Mb
       L1 data cache	     unknown kb
       L1 instruction cache: unknown kb
       L2 cache:	     unknown kb

       Here's some data collected on a very old Cray Y-MP, which was introduced in 1991.

       e.g 6 (Cray Y-MP running UNICOS)

       Hardware provider:    Cray
       Hardware platform:    Y-MP
       Machine: 	     CRAY_Y-MP
       Sysname: 	     sn5176
       Release: 	     9.0.2.2
       Version: 	     sin.0
       Nodename:	     sn5176
       #CPUs supported:      unknown
       #CPUs online:	     4
       CPU type:	     unknown
       FPU type:	     unknown
       Speed:		     33.3 MHz
       RAM:		     unknown Mb
       L1 data cache	     unknown kb
       L1 instruction cache: unknown kb
       L2 cache:	     unknown kb

       That  is all the examples of commercial hardware running the operating systems made by the manufacturers of the hardware. The following are
       free UNIX versions. In these cases the data gathered is never as complete. In particular the amoumt of memory reported if often	less  than
       the  real  amount due to memory taken by the operating system (kernel etc). The number of processors the system can support is never avail-
       able.

       Here's the first such non-commercial UNIX from a single processor Sun SPARCstation 20 running NetBSD 1.6.

       e.g. 7 (Sun SPARCstation 20 running NetBSD 1.6)
       Hardware provider:    unknown
       Hardware platform:    unknown
       Machine: 	     sparc
       Sysname: 	     NetBSD
       Release: 	     1.6
       Version: 	     NetBSD_1.6_(GENERIC)_#0:_Mon_Sep__9_08:2sparc
       Nodename:	     blackbird
       #CPUs supported:      unknown
       #CPUs online:	     1
       CPU type:	     rg:/autobuild/sparc/OBJ/autobuild/src/sys/arch/sparc/compile/GENERIC
       FPU type:	     unknown
       Speed:		     unknown MHz
       RAM:		     255 Mb
       L1 data cache	     unknown kb
       L1 instruction cache: unknown kb
       L2 cache:	     unknown kb

       Here's data from a Sun SPARCstation 20 running OpenBSD 3.2. The machine has 320 Mb of RAM, not 318 Mb as indicated. The number  of  proces-
       sors  the  system  supports  is reported as unknown, but should the system have been running Solaris 9, as in the example 1 (sparrow), then
       this information would have been determined, but it is not available under OpenBSD - or Solaris 2.5 for that matter.

       e.g. 8 (Sun SPARCstation 20 running OpenBSD 3.2)
       Hardware provider:    unknown
       Hardware platform:    unknown
       Machine: 	     sparc
       Sysname: 	     OpenBSD
       Release: 	     3.2
       Version: 	     GENERIC#36
       Nodename:	     crow.crow.localdomain
       #CPUs supported:      unknown
       #CPUs online:	     1
       CPU type:	     unknown
       FPU type:	     unknown
       Speed:		     unknown MHz
       RAM:		     319 Mb
       L1 data cache	     unknown kb
       L1 instruction cache: unknown kb
       L2 cache:	     unknown kb
       The next machine is a Sun SPARCstation 20 running Debian Linux. The version of Debian is unknown, but clearly sysdata is unable	to  deter-
       mine this.

       e.g. 9 (Sun SPARCstation 20 running Debian Linux)

       Hardware provider:    unknown
       Hardware platform:    unknown
       Machine: 	     sparc
       Sysname: 	     Linux
       Release: 	     2.2.20
       Version: 	     #1_Fri_Nov_16_15:48:02_EST_2001
       Nodename:	     dove
       #CPUs supported:      unknown
       #CPUs online:	     1
       CPU type:	     unknown
       FPU type:	     unknown
       Speed:		     unknown MHz
       RAM:		     281 Mb
       L1 data cache	     unknown kb
       L1 instruction cache: unknown kb
       L2 cache:	     unknown kb

       Here's  data from a Sun SPARCstation 20 running Solaris 2.5 (SunOS 5.5). The machine probably does have 352 Mb of RAM as reported. The num-
       ber of processors the system supports is reported as unknown, but should the system have been running Solaris 9, as in the example 1 (spar-
       row), then this information would have been determined, but it is not available under Solaris 2.5.

       e.g. 10 (Sun SPARCstation 20 Solaris 2.5)
       Hardware provider:    Sun_Microsystems
       Hardware platform:    SUNW,SPARCstation-20
       Machine: 	     sun4m
       Sysname: 	     SunOS
       Release: 	     5.5
       Version: 	     Generic
       Nodename:	     bluetit
       #CPUs supported:      unknown
       #CPUs online:	     2
       CPU type:	     sparc
       FPU type:	     sparc
       Speed:		     125 MHz
       RAM:		     352 Mb
       L1 data cache	     unknown kb
       L1 instruction cache: unknown kb
       L2 cache:	     unknown kb

       Here's a standard PC, fitted with one processor

       e.g. 11 (350 MHz Pentium II PC running Redhat Linux)
       Hardware provider:    unknown
       Hardware platform:    unknown
       Machine: 	     i686
       Sysname: 	     Linux
       Release: 	     2.4.18-5
       Version: 	     #1_Mon_Jun_10_15:31:48_EDT_2002
       Nodename:	     tiger
       #CPUs supported:      unknown
       #CPUs online:	     1
       CPU type:	     unknown
       FPU type:	     unknown
       Speed:		     unknown MHz
       RAM:		     123 Mb
       L1 data cache	     unknown kb
       L1 instruction cache: unknown kb
       L2 cache:	     unknown kb

FILES

       sysdata does not read/write any files.

SEE ALSO

       atlc(1)
       create_bmp_for_circ_in_circ(1)
       create_bmp_for_circ_in_rect(1)
       create_bmp_for_microstrip_coupler(1)
       create_bmp_for_rect_cen_in_rect(1)
       create_bmp_for_rect_cen_in_rect_coupler(1)
       create_bmp_for_rect_in_circ(1)
       create_bmp_for_rect_in_rect(1)
       create_bmp_for_stripline_coupler(1)
       create_bmp_for_symmetrical_stripline(1)
       design_coupler(1)
       find_optimal_dimensions_for_microstrip_coupler(1)
       hinv - SGI's IRIX only.
       readbin(1)

       http://atlc.sourceforge.net		  - Home page
       http://sourceforge.net/projects/atlc	  - Download area
       atlc-X.Y.Z/docs/html-docs/index.html	  - HTML docs
       atlc-X.Y.Z/docs/qex-december-1996/atlc.pdf - theory paper
       atlc-X.Y.Z/examples			  - examples

Dr. David Kirkby					     atlc-4.5.0 28th Sep 2003							sysdata(1)
All times are GMT -4. The time now is 09:21 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy