We are looking at running MPIO for it's redundancy and load balancing benefits. Does anyone know what pieces of software or modules are needed on the VIO server to get load balancing to work. Remember we are using EMC's DMX3500 storage system. We no longer want to use Powerpath. :rolleyes: ... (2 Replies)
Hi
I would like to ask what the benefits are of changing from RDAC to MPIO when connecting to a DS4000 on AIX 5.3? I have heard that IBM MPIO "might" support more than 1 active path to a LUN when connecting to a DS4800 through more than 1 host connection on the same AIX client. I understand that... (8 Replies)
Hi folks,
does anybody have a link to a documentation how to implement native MPIO on AIX? We are using EMC PowerPath and Datacore SanSymphony/Cambex for this so far and I wasn't able to find a good description on that topic. All I know so far is that mkpath, chpath and lspath are used to... (3 Replies)
If PATH is set to ../bin:../sbin:/usr/bin:/usr/local/bin (chunk of path string). Sometime when I try to execute ls command it says ../bin/ls not found. According to my understanding "ls" should be searched in all the path varibales that we set in the PATH varaibale.
Is there any reason for the... (5 Replies)
hello
On Debian Lenny, I first ran apt-get install git-core and then removed it to install from source. The trouble is that when I typed git --version, I am get:
-bash: /usr/bin/git: No such file or directory
of course, git is now in /usr/local/bin
I don't understand why since... (1 Reply)
Hi,
I was trying to uninstall the native MPIO driver on the AIX 6.1 machine we have in our lab and ran into a whole bunch dependent filesets initially. I deleted the disks, fcsX, fscsiX, fcnetX and tried again, but ran into the same error.
Subsequently, I figured out that the OS disks in... (4 Replies)
We have AIX 6.1 system attached to SAN disks (DS4700 and DS8100) thru SVC.
Initially when the system was I forgot to install sddpcm drivers. and wanted to know how can i go with the installation of the sddpcm drivers.
My understandin going thru the manual ... (3 Replies)
Hello,
I logged in to the unix solaris with my user name and then I again logged in with the sudo bash -l command
now when I do echo $PATH
It shows me => /usr/bin:/usr/local/bin:/usr/bin/usr/sbin:/usr/ucb:/usr/local/bin
How do i find out where is this file located for setting the... (3 Replies)
Hi All,
I have followed the steps to set up the public and private keys for SFTP setup. Somehow the SFTP is not working and I get following errors:
==> sftp -v remote_user@remote_host_name_changed
OpenSSH_5.4p1, OpenSSL 0.9.8m 25 Feb 2010
debug1: Reading configuration data... (12 Replies)
I have found failed mpio path on AIX and enabled that failed path as below
failed path on AIX
bash-3.2# lspath -l hdisk10
Enabled hdisk10 fscsi0
Enabled hdisk10 fscsi0
Failed hdisk10 fscsi3
Enabled hdisk10 fscsi3
Enabled failed path as below
chpath -l hdisk10 -p fscsi3 -s enable... (13 Replies)
Discussion started by: murali969
13 Replies
LEARN ABOUT CENTOS
ipsec_klipsdebug
IPSEC_KLIPSDEBUG(5) [FIXME: manual] IPSEC_KLIPSDEBUG(5)NAME
ipsec_klipsdebug - list KLIPS (kernel IPSEC support) debug features and level
SYNOPSIS
ipsec klipsdebug
cat/proc/net/ipsec_klipsdebug
DESCRIPTION
/proc/net/ipsec_klipsdebug lists flags that control various parts of the debugging output of KLIPS and MAST, two of the IPsec stacks
supported by Libreswan. At this point it is a read-only file.
A table entry consists of:
+
a KLIPS debug variable
+
a '=' separator for visual and automated parsing between the variable name and its current value
+
hexadecimal bitmap of variable's flags.
The variable names roughly describe the scope of the debugging variable. Currently, no flags are documented or individually accessible yet
except tunnel-xmit.
The variable names are:
tunnel
tunnelling code
netlink
userspace communication code (obsolete)
xform
transform selection and manipulation code
eroute
eroute table manipulation code
spi
SA table manipulation code
radij
radij tree manipulation code
esp
encryptions transforms code
ah
authentication transforms code
rcv
receive code
ipcomp
ip compression transforms code
verbose
give even more information, beware this will probably trample the 4k kernel printk buffer giving inaccurate output
All KLIPS debug output appears as kernel.info messages to syslogd(8). Most systems are set up to log these messages to /var/log/messages.
EXAMPLES
debug_tunnel=00000010.
debug_netlink=00000000.
debug_xform=00000000.
debug_eroute=00000000.
debug_spi=00000000.
debug_radij=00000000.
debug_esp=00000000.
debug_ah=00000000.
debug_rcv=00000000.
debug_pfkey=ffffffff.
means that one tunnel flag has been set (tunnel-xmit), full pfkey sockets debugging has been set and everything else is not set.
FILES
/proc/net/ipsec_klipsdebug, /usr/local/bin/ipsec
SEE ALSO ipsec(8), ipsec_manual(8), ipsec_tncfg(8), ipsec_eroute(8), ipsec_spi(8), ipsec_spigrp(8), ipsec_klipsdebug(5), ipsec_version(5),
ipsec_pf_key(5)HISTORY
Written for the Linux FreeS/WAN project <http://www.freeswan.org/> by Richard Guy Briggs.
[FIXME: source] 10/06/2010 IPSEC_KLIPSDEBUG(5)