I'm a Solaris and Debian/SuSE weenie, and I need some help setting the IP address of the remote web interface on an IBM 550
I plugged the port labled HMC1 to the network. The "network" is really a small linksys router that I use to test internet configs, as I can change the settings at will... (0 Replies)
Hello
I have a system with four AIX 5L V5.3 partitions and a Virtual I/O server, connected to a a DS4800 storage array.
Now the company bought another DS4800... i made raid on it... and now i wanna give LUN's to the VIOS, so i can use in one of AIX partitions...
Someone can help me?
... (5 Replies)
I created a profile in HMC for a new LPAR and activated it but not yet installed AIX.
Is there a step to make this new LPAR available as vhostX from the VIO server after creating and activating an HMC profile?
I already shared the CD-ROM device from the HMC profile.
Thanks.
-... (1 Reply)
Hi Guys,
Is there any one can help me with the below error message dispalys on the LED panel.
10112633 u0.1-p1-v2
I bought a second hand IBM 7029 6C3 online several days ago. On the fist day, it can be ran well. but on second day, when i tried to boot up the machine, after few mins, the... (2 Replies)
Hi,
When I try to login on my vios ivm website http://vios through the browser -- all three of them -- firefox , chrome , Internet Explorer , i get this error
http://vioserver/j_security_check
I have java installed on the machine from where i am trying to open up the IVM/VIOS webpage.
I... (2 Replies)
Hello,
I installed PowerVM IVM Virtual I/O on P-550 but later found out that the machine isn't activated for CoD VET code for virtualization.
So when booted , it goes into OPEN Firmware
I/O Hosting requires a hosting partition boot not permitted exit called
> ok
Panel shows > IO... (3 Replies)
Hi,
Just joined to new company with one Power 720 Express (8202-E4C) server and have no much experience with IBM systems.
I am trying to move everything I mentioned to different subnet as required by customer contract (currently sitting on same subnet as company lan). Access to this subnet will... (8 Replies)
Hi There,
I have zero information and zero knowledge for IBM virtual machine except Amazon cloud and VMware ESXi (Only Linux OS available).
Anyone could provide me the following answer -
Can IBM VM been deploy on X86 and X64 (Intel Chip)?
If answer is yes any chance to deploy AIX OS... (13 Replies)
coming from this thread: https://www.unix.com/aix/211107-ibm-power-pseries-open-firmware-boot-vios-powervm-vet-code.html
PowerVM, formerly known as Advanced Power Virtualization (APV), is a chargeable feature of IBM POWER5, POWER6, POWER7, POWER8, and POWER9 servers and is required for support... (0 Replies)
Discussion started by: filosophizer
0 Replies
LEARN ABOUT NETBSD
urlphy
URL(4) BSD Kernel Interfaces Manual URL(4)NAME
url -- Realtek RTL8150L USB Ethernet driver
SYNOPSIS
url* at uhub?
urlphy* at mii?
DESCRIPTION
The url driver provides support for USB Ethernet adapters based on the Realtek RTL8150L USB-ether bridge chip.
The url driver supports the following adapters:
CompUSA USBKR100
GreenHouse GH-USB100B
Melco Inc. LUA-KTX
Sitecom LN013
For more information on configuring this device, see ifconfig(8).
DIAGNOSTICS
url%d: watchdog timeout A packet was queued for transmission and a transmit command was issued, however the device failed to acknowledge the
transmission before a timeout expired.
url%d: no memory for rx list The driver failed to allocate an mbuf for the receiver ring.
SEE ALSO arp(4), mii(4), netintro(4), usb(4), ifconfig(8)HISTORY
The url device driver first appeared in NetBSD 1.6.
AUTHORS
The url driver was written by Shingo WATANABE <nabe@nabechan.org>.
BSD September 18, 2006 BSD