Let me clarify again. On the power machine which has physical FCs attached to SAN via SAN switch, as can be seen on my environment, there are 2 LPARs as below:
1. First LPAR with virtual FC (assigned by VIOS) and can use the LUN allocated to it, this point can be understood as it uses NPIV.
2. Second LPAR does not use VIOS and virtual FC, because with the lsdev -Cc adapter | grep fcs as showed, the FC adapter are "physical ones", not virtual as it does not start with C in the WWPN.
My question is, how can it connects and uses the LUN which is allocated to it? As my thought, it is utilizing also the physical FC port of power machine.
if first LPAR uses NPIV, so what technique does second LPAR use? It can use Power Machine physical FC directly and without need the VIOS and virtual FC?
Hi,
Is there a way to dynamically increase the size of virtual disk on the LPAR. The virtual disk is coming from my VIO Server. From my SAN I have allocated a disk to VIO Server and from VIO Server to my LPAR....If I increase the space of the logical SAN DISK (DS 4700 using IBM TotalStorage... (0 Replies)
Hi,
I want to know if there is any command which will tell me if an AIX machine is a LPar or not. I am using "lparstat -i" but it does not work on all AIX machines. Is there any generic command by whose output I will come to know if it is an LPar or not?
Please help.
Thanks,
Vineet (3 Replies)
Hello, we have a wierd and urgent problem, with a few of our p595 LPARs running AIX 5.3. The LPARs ran AIX 5.3 TL 7 and booted off EMC SAN disks, using EMC Powerpath. Every boot we run "pprootdev on" and "pprootdev fix". We can issue "bosboot -a" and we can reboot the machines.
Now, on two... (2 Replies)
Hi All,
I recently got a connection to the SAN through a fibre channel on my solaris box:
#luxadm -e port
/devices/pci@1d,700000/SUNW,qlc@1/fp@0,0:devctl CONNECTED
#ls -l /dev/cfg
lrwxrwxrwx 1 root root 48 Feb 23 12:31 c4 -> ../../devices/pci@1d,700000/SUNW,qlc@1/fp@0,0:fc
I then... (2 Replies)
Hi Guru, my question is that can I create LPAR in AIX 5.3, 6.0, 6.1 by using smit lpar, rather than using HMC or AIX Commands? Thank you very much. Mir Alihttp://xwww.unix.com/images/icons/icon5.gif (3 Replies)
I have login into a server, and when i launch this command uname -L.
I can see there is a LPAR.
But is there anymore commands i can use to get more information on the LPAR ?
like it is VIO ?
wat the IP address ?
etc, etc.
please help. Thank you. (7 Replies)
We are running into a problem that we thought had solved but no go...
We have multiple machine types but 1 AIX and 2 i550 (AS/400) with 4 lpar each.
Existing AIX is an old (2004 vintage) machine with 5.2 on it for historical use only.
Existing Power6 i550 running code that will used... (6 Replies)
Hello,
I've set up email alerts on AIX Servers. so that i can get email notifications (via mail relay server) when ever there is abnormal behavior.
for example
1) my script monitors CPU/disk/memory etc... when it reaches high water ark, it will send an email alert.
2) disk usage alerts
3)... (5 Replies)
We have 2 LPAR. LPAR #1 have a Application, Database Server process (ctree Server) and SAN+Physical Table. LPAR#2 has only Application.
Both Application process are connected to Database via C-tree Server Process (Running on LPAR #1..
We want to keep one Active C-tree Server and one Backup... (1 Reply)
Discussion started by: gabhanes
1 Replies
LEARN ABOUT NETBSD
arcmsr
ARCMSR(4) BSD Kernel Interfaces Manual ARCMSR(4)NAME
arcmsr -- Areca Technology Corporation SATA/SAS RAID controller
SYNOPSIS
arcmsr* at pci? dev ? function ?
DESCRIPTION
The arcmsr driver provides support for the PCI-X and PCI Express RAID controllers from Areca Technology Corporation:
- ARC-1110 PCI-X 4 Port SATA RAID Controller
- ARC-1110ML PCI-X 4 Port SATA RAID Controller
- ARC-1120 PCI-X 8 Port SATA RAID Controller
- ARC-1120ML PCI-X 8 Port SATA RAID Controller
- ARC-1130 PCI-X 12 Port SATA RAID Controller
- ARC-1130ML PCI-X 12 Port SATA RAID Controller
- ARC-1160 PCI-X 16 Port SATA RAID Controller
- ARC-1160ML PCI-X 16 Port SATA RAID Controller
- ARC-1170 PCI-X 24 Port SATA RAID Controller
- ARC-1200 Rev A PCI Express 2 Port SATA RAID Controller
- ARC-1202 PCI Express 2 Port SATA RAID Controller
- ARC-1210 PCI Express 4 Port SATA RAID Controller
- ARC-1220 PCI Express 8 Port SATA RAID Controller
- ARC-1230 PCI Express 12 Port SATA RAID Controller
- ARC-1230ML PCI Express 12 Port SATA RAID Controller
- ARC-1231ML PCI Express 12 Port SATA RAID Controller
- ARC-1260 PCI Express 16 Port SATA RAID Controller
- ARC-1260ML PCI Express 16 Port SATA RAID Controller
- ARC-1261ML PCI Express 16 Port SATA RAID Controller
- ARC-1280 PCI Express 24 Port SATA RAID Controller
- ARC-1280ML PCI Express 24 Port SATA RAID Controller
- ARC-1680 PCI Express 8 Port SAS RAID Controller
- ARC-1680LP PCI Express 8 Port SAS RAID Controller
- ARC-1680i PCI Express 8 Port SAS RAID Controller
- ARC-1680x PCI Express 8 Port SAS RAID Controller
- ARC-1681 PCI-X 8 Port SAS RAID Controller
These controllers support RAID levels 0, 1, 1E, 3, 5, 6, and JBOD using either SAS or SATA II drives.
arcmsr supports management and monitoring of the controller through the bioctl(8) and envstat(8) commands.
Please note, however, that to use some features that require special privileges, such as creating/removing hot-spares, pass-through disks or
RAID volumes will require to have the password disabled in the firmware; otherwise a Permission denied error will be reported by bioctl(8).
When a RAID 1 or 1+0 volume is created, either through the bioctl(8) command or controller's firmware, the volume won't be accessible until
the initialization is done. A way to get access to the sd(4) device that corresponds to that volume without rebooting, is to issue the fol-
lowing command (once the initialization is finished):
$ scsictl scsibus0 scan any any
The arcmsr driver will also report to the kernel log buffer any error that might appear when handling firmware commands, such as used by the
bioctl(8) command.
EVENTS
The arcmsr driver is able to send events to powerd(8) if a volume or any drive connected to the volume is not online. The state-changed
event will be sent to the /etc/powerd/scripts/sensor_drive script when such condition happens.
SEE ALSO intro(4), pci(4), scsi(4), sd(4), bioctl(8), envstat(8), powerd(8), scsictl(8)HISTORY
The arcmsr driver first appeared in NetBSD 5.0.
AUTHORS
The arcmsr driver was originally written for OpenBSD by David Gwynne. It was ported to NetBSD and extended by Juan Romero Pardines.
BSD March 3, 2008 BSD