Sponsored Content
Operating Systems Solaris Fibre channel link down on booting Solaris server Post 303020580 by hicksd8 on Monday 23rd of July 2018 12:50:20 PM
Old 07-23-2018
So none of those disks are bootable.

Did the system boot via the FC link which is now down?

Do you know from which disk it should boot?

It is possible that the proper boot disk is local disk0 which has sustained filesystem damage during the power cut. You may need to boot from DVD and fsck this filesystem. If that doesn't work you may need to recover some files from backup. It is likely that the FC link is down as far as the SC is concerned because Solaris isn't running and the QLogic driver isn't therefore loaded.

Last edited by hicksd8; 07-23-2018 at 01:55 PM..
This User Gave Thanks to hicksd8 For This Post:
 

7 More Discussions You Might Find Interesting

1. AIX

Fibre channel drivers on RS/6000 aix 5L

Want to configure IBM raid strorage but the aix 5L cds do not have the drivers for the fibre channels. The machine is RS/6000. I have gone to IBM downlaodable sites but i can't find the drivers? help pliz:mad: (4 Replies)
Discussion started by: Zim-Aix-Guru
4 Replies

2. AIX

Power6 Virtual Fibre Channel Adapter

Hello, Searched in all IBM Redbooks and on the internet and couldn't find anything about the new feature of POWER 6 which Virtual Fibre ( Fiber ) channel adapter. It is similar to virtual scsi adapter. In my client partition I created the virtual Fibre Adapter mapped it with the VIO... (1 Reply)
Discussion started by: filosophizer
1 Replies

3. Solaris

USCSICMD ioctl calls for Fibre Channel(FC) devices on Solaris 10?

Hi , I have wrtitten a C program that issues USCSICMD ioctl call to the tape devices attached on solaris sparc 10. I was able to get the required information from all SCSI tape devices attached using the utility. But, whenever it is run on FC attached tape drives , the program returns an error... (0 Replies)
Discussion started by: naveen448
0 Replies

4. Hardware

Fibre Channel HBA recommendations?

We will be buying new Xeon E5-based servers for our datacenter and were wondering which Fibre Channel host bus adapters we should select for these. The choices are Emulex or QLogic (8Gb FC HBAs). Anybody have any recommendations on which is the better choice? Thanks in advance. (1 Reply)
Discussion started by: atahmass
1 Replies

5. AIX

[ASK] - AIX Fibre Channel behavior

Hello all, Let me introduce about the context and my environment. We have an AIX 6.1 system, it has 4 FC channels / > lsdev -Cc adapter | grep fcs fcs0 Available 23-T1 Virtual Fibre Channel Client Adapter fcs1 Available 23-T1 Virtual Fibre Channel Client Adapter fcs2 Available 23-T1... (14 Replies)
Discussion started by: Phat
14 Replies

6. Solaris

Fibre Channel link not ready on Netra 240

Hi, One of my Netra 240 went into hung state and I had to reboot it. I powered it off and tried booting it again but unsuccessful. It is not connected to SAN and have local disks. Not able to boot in failsafe mode too. There are two disks of 72GB, both are mirrored in SVM. It complains about... (5 Replies)
Discussion started by: solaris_1977
5 Replies

7. Solaris

Issue with Fiber Channel cards in Solaris

hi everone i am experiencing disconnectivity from storage to My database machines. i have doubt on my FC cards in my sparc T4-2 machines. i want to know how should i check from my solaris that whether the cards are ok or not because once the disks get disconnect from SAN so it come back again but... (5 Replies)
Discussion started by: janakors
5 Replies
mkcd(1M)						  System Administration Commands						  mkcd(1M)

NAME
mkcd - create bootable Solaris ISO image SYNOPSIS
/usr/bin/mkcd -v [-l label] media-root iso DESCRIPTION
The mkcd utility takes media-root (the root of an on-disk Solaris install media) as input and creates a bootable Solaris ISO image in the file iso, using mkisofs(8). The file can then be burned onto a CD/DVD with utilities such as cdrw(1) or cdrecord(1). (Neither mkisofs(8) nor cdrecord(1) are SunOS man pages.) Caution - The directory tree media-root must contain the file boot/grub/stage2_eltorito, which will be written to the media boot sectors. This file will be modified with some boot information, thus it must be writable. If necessary, first save a copy prior to running this utility. OPTIONS
The following options are supported: -l label Sets label as the label/volume name of the ISO image. -v Verbose. Multiple -v options increase verbosity. OPERANDS
The following operands are supported: media-root Top-level directory of an on-disk Solaris install media. iso Name of the output file which will contain the resulting ISO image. EXAMPLES
Example 1 Creating an ISO Image and Burning a CD/DVD The following commands create an ISO image from the content of s10u1 and burn the image to a CD/DVD. # /usr/bin/mkcd s10u1 s10u1.iso # /usr/bin/cdrw -i s10u1.iso ATTRIBUTES
See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Availability |SUNWcsu | +-----------------------------+-----------------------------+ |Interface Stability |Committed | +-----------------------------+-----------------------------+ SEE ALSO
cdrw(1), attributes(5) mkisofs(8), (/usr/share/man/man8/mkisofs.8), in the SUNWfsman package (not a SunOS man page) SunOS 5.11 25 Jul 2008 mkcd(1M)
All times are GMT -4. The time now is 11:27 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy