I've attached a jpg of the screen. I've also ordered a new Intel Pro/100+ network card to put into the alternate computer--the Realtek LAN card is really the only I/O device which is different from the original computer. I'll post again when I receive and install the new LAN card--I hope that will solve the problem.
Hi guys,
May I know how to install Solaris 8 in the way that I can triple boot it with my the other two OS: WIndows ME and Windows 2000 Pro.
Can you all please kindly advise me on how to setup the triple boot process inorder to allow Windows ME to be the default OS when being ask to choose... (1 Reply)
I have a RH 7.3 server that needs a restart today after putting a patch in place. The last time I rebooted this box was almost a year ago and when the uptime is quite long, Linux likes to check all the disks for errors, including the RAID. This adds almost 1.5Hrs to my bootup process:eek: .
Does... (1 Reply)
Hello there
I need to run a script whenever i reboot or startup my HP-UX server. This script adds some routes to the route table, and it start third party aplications like "Star Manager".
I thought i could do this simply putting the script in "/sbin/init.d,
and a link to the script in... (7 Replies)
Hi all
The following error was displayed when a sco server (5.0.5) was booted. What should be done to overcome the problem. Replies appreciated.
Bios 03.0
0130688 KB memory good
01 processor(s) in system
remote console dialing on, please wait
connect fail : modem off
cpu clock... (6 Replies)
Hi i installed ssh of version v 1.21 and my AIX is of 5.3.
I want to start my ssh deamon at the startup
can any one please help me out reg..
Thanks in advance.. (1 Reply)
Hi,
I've got a recent problem with 2 file systems on an AIX 5.3 server. The fs's are marked to auto mount at startup and do show as being mounted after a a restart however if you cd to the mount point and 'df -g .' it shows the fs hasn't actually mounted.
$ mount |grep SQLT0001.0
... (2 Replies)
Hi,
I am using a Linux system running at run level 3. I am finding a wired problem, once the system boots, the system terminal slows down, I need to type the characters repeatedly to enter my login and password info. Also running any commands takes time, it stays in this condition for some... (1 Reply)
Hi Folks,
Has anyone seen these errors on bootup.
Mar 15 12:22:30 svc.startd: svc:/system/device/local:default: Method "/lib/svc/method/devices-local" failed due to signal SEGV.ht (c) 1983, 2010,
Oracle and/or its affiliates. All rights reserved.
Configuring devices. ... (1 Reply)
Discussion started by: ESSTEAM
1 Replies
LEARN ABOUT NETBSD
xi
XI(4) BSD Kernel Interfaces Manual XI(4)NAME
xi -- Xircom CreditCard Ethernet device driver
SYNOPSIS
xi* at xirc?
Configuration of PHYs may also be necessary. See mii(4).
DESCRIPTION
The xi driver provides support for the Xircom CreditCard family of PCMCIA Ethernet adapters. Supported cards include:
Xircom CreditCard Ethernet II
Xircom CreditCard 10/100 Ethernet
Xircom RealPort 10/100 Ethernet + Modem (Ethernet function only)
Intel EtherExpress Pro/100
Compaq Netelligent 10/100
Cards which should work, but have not been confirmed include:
Xircom RealPort Ethernet
Xircom RealPort 10/100 Ethernet
Some Xircom Ethernet products are supported by the tlp(4) driver.
MEDIA SELECTION
Media selection is done using ifconfig(8) using the standard ifmedia(4) mechanism. Refer to those manual pages for more information.
SEE ALSO ifmedia(4), mii(4), netintro(4), pcmcia(4), tlp(4), xirc(4), ifconfig(8)HISTORY
The xi device driver appeared in NetBSD 1.5.
BUGS
The driver suffers from poor performance. Even with the 10/100 cards, do not expect more than ~450KB/s. Some 10/100 cards may not autonego-
tiate reliably and require manual media selection.
The Xircom multifunction cards which contain both Ethernet and modem interfaces are known to have problems. This is due to the card not
reporting itself correctly as a multifunction card.
BSD June 1, 2007 BSD